-
Fast ShippingGet the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹16,757.59 (Including tax)
Discount per Bulk Quantity
| Quantity | Discount | Price |
|---|---|---|
| 5 - 10 | 5% | ₹15,919.72 (Including tax) |
| 11 - 20 | 8% | ₹15,416.98 (Including tax) |
| 21 - 40 | 10% | ₹15,081.84 (Including tax) |
| 41 - 100 | 12% | ₹14,746.69 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
The STEVAL-STRKT01 LoRa IoT tracker is designed and optimized to implement the latest technologies in IoT tracker
applications such as asset, people, and animal tracking as well as fleet management.
The evaluation board simplifies prototyping, evaluation, and development of tracker innovative solutions. It comes with
comprehensive software, firmware libraries, tools, battery, cables, and plastic cases.
Thanks to the STM32L072CZ embedded in the CMWX1ZZABZ-091 LoRa® module (by Murata), the STEVAL-STRKT01 allows
acquiring a position, managing geofence and data logging from the Teseo-LIV3F GNSS module, and monitoring motion (LIS2DW12)
and environmental (HTS221 and LPS22HB) sensors.
   Note: For more technical detail go through Datasheet in the attachment section
1 x STEVAL – STRKT01 Evaluation Board, LoRa IoT Tracker, Full IoT GNSS Asset Tracking Solution
| Processor |
ARM® Cortex®-M0+ core |
|---|---|
| Flash Memory |
192 Kbytes |
| RAM |
20 Kbytes |
| EEPROM |
20 Kbytes |
| RF Range |
860 – 930 MHz |
| USB |
2.0 FS |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
| Operating Voltage(V) |
3.7V – 5V |
|---|---|
| Output Voltage(V) |
+20.8 dBm at 3.3V |
| Working frequency |
868/915MHz |
| Sensitivity (dBm) |
-106 ,116.5 dBm ~ -136 dBm |
| Modulation Type |
LoRa ,(G)FSK ,(G)MSK ,BPSK |
| Working Temperature Range (°C) |
-40℃ ~ 85℃ |
| Interface |
USB Type C / 2P-2.54mm Hole / 1*12P-2.54mm Header*2 / SMA-K / IPEX |
Out of stock
| Processor |
Raspberry Pi 4 (Broadcom BCM2711 ,Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) |
|---|---|
| RAM |
4GB |
| Storage |
64GB MicroSD Card |
| Frequency |
US915 Version: 902MHz ~ 928MHz – For USA and Canada |
| Sensitivity |
125dBm @125KHz/SF7 -139dBm @125KHz/SF12 |
| TX Power |
Up to 26 dBm |
| Antenna Gain |
US915: 2.6 dBi |
| Antenna Impedance |
50 Ohm |
| Antenna Radiation Pattern |
Omni-Directional |
| Connectivity |
Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless Bluetooth 5.0 ,BLE LoRaWAN Supports Class A ,C |
| Input Voltage |
DC 5V – 3A |
| Interfaces |
USB Type-C (Power Supply) * 1 Ethernet RJ45 * 1 RP-SMA Female Antenna Connector* 1 |
| Operating Temperature |
0°C to 50°C |
| Relative Humidity |
0% – 90% (non-condensing) |
| Heat Dissipation |
Aluminum enclosure ,a heatsink ,and a cooling fan |
| IP Grade |
IP20 |
| GTIN |
110991634 |
Out of stock
Out of stock
| Processor |
STMicro STM3L412 Arm Cortex-M4 microcontroller @ 80 MHz with 40KB RAM ,64 or 128KB flash |
|---|---|
| Transceiver |
Semtech SX1302 LoRa with 2x SX1250 Tx/Rx front-ends |
| Transmit Power (dBm) |
Up to 26dBm @ 3.3V |
| Receiver Type |
Down to -139dBm @ SF12 ,BW 125 kHz; -125dBm @ 125K/SF7 |
| No. of Band |
EU868 ,US915 ,AS923 ,AS920 ,AU915 ,KR920 ,and IN865. u.FL antenna connector |
| SPI version |
Standby: 7.5 mA; Tx up to 415 mA; Rx: 40 mA |
| USB version |
Standby: 20 mA; Tx up to 425 mA; Rx: 53 mA |
| Interface |
SPI or USB interface on 52-pin mPCIe edge connector |
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.