LoRa SX1278 433MHz rf Module 1w Long Range Transceiver CDSENET E32-433T30S UART SMD 30dBm 433 mhz IOT Transmitter Receiver

Specifications and Features:

1. Application: computer, other
2. Brand Name: CDSENET
3. Distance: 8000m
4. Frequency: 433 MHz
5. Interface: UART
6. Is cusmozied: Yes
7. Model Number: E32-433T30S
8. Model Numer: rf module
9. Port Number: 1
10. Power: 30dBm
11. RF connector: SMD
12. RF IC: SX1278
13. Type: Wireless Module

Package Includes:

1 x LoRa IoT E32-433T30S UART 433MHZ SX1278 Wireless Transmitter and Receiver RF Module

The TTGO T-Beam offers 26-pin headers with GPIO, ADC, VP/VN, DAC, touch, SPI, I2C, UART, 2דLoRa” pin, and power signals (5V/3.3V/GND) There are also two buttons on the board—one is for power, but the second is connected to the GPIO39 pin of the ESP32.

Pin Description:

The board is built around a dual-core ESP32 chip, with 4MB of SPI flash onboard, providing both Wi-Fi and Bluetooth LE via a “3D antenna” on the PCB. The board’s LoRa support comes in three different variants, operating at 433MHz, 868MHz, and 915MHz depending on region, with an included SMA antenna. While location tracking is provided by the onboard u-Blox NEO-6M GPS module with a ceramic antenna.

The board can be programmed using the Arduino development environment, and the example code shows you how to both send and receive data via LoRa.Flipping the board over there is a battery holder for a 18650 Li-Ion cell, and while a 18650 sort of looks like a “standard” AA battery, it’s significantly different. So don’t make the mistake of substituting in the more common AA battery to try and power the board. They’re not quite the same size, but I’ve seen people attempt this substitution nonetheless.

Features:

1. Highly configurable data packet processing program, the configuration parameter data can be saved in EEPROM.
2. ERP32 with the new version REV1 supports wireless Internet access and wireless Bluetooth connection.
3. Designated module with ceramic antenna and super signal, supports automatic gain control and automatic frequency correction.
4. GPS With the help of a global positioning system, GPS module NEO-6M, 3V-5V universal power supply.
5. It also has a digital RSSI function, RF wake-up function,
6. 4MB flash memory,
7. Low voltage detection, and temperature sensor,
8. Fast wake-up and frequency hopping LED signal indicator, and battery with data backup.

Package Includes:

1 x TTGO T-Beam V1.1 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module

1  x Antenna

1 x Berg Pins

The STEVAL-STRKT01 LoRa IoT tracker is designed and optimized to implement the latest technologies in IoT tracker
applications such as asset, people, and animal tracking as well as fleet management.
The evaluation board simplifies prototyping, evaluation, and development of tracker innovative solutions. It comes with
comprehensive software, firmware libraries, tools, battery, cables, and plastic cases.
Thanks to the STM32L072CZ embedded in the CMWX1ZZABZ-091 LoRa® module (by Murata), the STEVAL-STRKT01 allows
acquiring a position, managing geofence and data logging from the Teseo-LIV3F GNSS module, and monitoring motion (LIS2DW12)
and environmental (HTS221 and LPS22HB) sensors.

     Note: For more technical detail go through Datasheet in the attachment section

Features:

1. Optimized IoT tracker solution over LoRaWAN™ network with simultaneous multi-constellation GNSS
2. positioning and geofencing support
3.  Battery-operated solution with smart power management architecture
4.  First IoT ST reference embedding a USB Type-C connector and a port controller
5.  Environmental and motion sensors
6.  Data logging

Package Includes:

1 x STEVAL – STRKT01 Evaluation Board, LoRa IoT Tracker, Full IoT GNSS Asset Tracking Solution

FM98PW/RFM95PW module series’ design is based on the high-performance LoRa TM modulation technique RF98/RF96 chip, It operates at  169/433/470MHz (RFM98PW) and 868/915MHz(RFM95PW) ISM band, The low receive sensitivity(–136dBm) coupled with Enhanced +30dBm output power ensures extended range and improved link performance.

Applications:

1. Long Range system.
2. Meter Reading.
3. Wireless data collection.
4. Automobile security system.
5. Home automation and security system.

Features:

1. LoRa TM Modem.
2. 166dB maximum link budget.
3. FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
4. Built-in bit synchronizer for clock recovery.
5. Automatic RF Sense and CAD with ultra-fast AFC.
6. Packet engine up to 256 bytes with CRC.
7. Built-in temperature sensor and low battery indicator.

Specifications:

1. Programmable bit rate:  300 kbps.
2. High sensitivity: down to -136dBm.
3. Low RX current: 13mA.
4. SMD Package (35.4x18X3.85mm).

Packages Includes:

1 x LoRa module RFM95PW-868S2.

Features:

1. Power supply: 3.7V 14500 Lipo battery Or 3.7~12Vdc power
2. Operating Frequency: 915 MHz
3. ATmega328P 8MHz with 3.3V logic/power
4. 3.3V regulator with 500mA peak current output
5. Hardware Serial, hardware I2C, hardware SPI support
6. 1 x PWM pins: D3
7. 2 x analog inputs: A0 A1
8. Pin #13 BLUE LED for general purpose blinking
9. 2 mounting holes
10. Size: 40mm x 60mm
11. Reset button

Package Includes:

1 x LoRa + ATmega328P Board with 14500 Battery Holder

1 x LoRa 868MHz Antenna

Lora Shield is a long-range transceiver on the Arduino shield form factor and is based on an Open source library. The Lora Shield allows the user to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.

The Lora Shield based on RFM95W/RFM98W targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

Using Hope RF’s patented LoRaTM modulation technique the Lora Shield can achieve a sensitivity of over -148dBm using a low-cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.

These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The Lora Shield deliver exceptional phase noise, selectivity, receiver linearity and IIP3 for significantly lower current consumption than competing devices.

Note: Images shown may differ from the actual product in terms of PCB and Connector colour

Features:

1. Compatible with 3.3v or 5v I/O Arduino Board.
2. Frequency Band: 915 MHZ (Pre-configure in factory)
3. Low power consumption
4. Compatible with Arduino Leonardo, Uno, Mega2560, DUE
5. External Antenna via SMA Jack
6. Automatic RF Sense and CAD with ultra-fast AFC.
7. Packet engine up to 256 bytes with CRC.
8. Built-in temperature sensor and low battery indicator.

Package Includes:

1 x Wireless Transmitter 915Mhz Lora Shield for Arduino