-
Fast ShippingGet the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹1,355.65 (Including tax)
Discount per Bulk Quantity
| Quantity | Discount | Price |
|---|---|---|
| 5 - 10 | 5% | ₹1,287.87 (Including tax) |
| 11 - 20 | 8% | ₹1,247.18 (Including tax) |
| 21 - 40 | 10% | ₹1,220.09 (Including tax) |
| 41 - 100 | 12% | ₹1,192.97 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
AMPHENOL SGX SENSORTECH Gas Detection Sensor, Ammonia, Carbon Monoxide, Ethanol, Hydrogen, Methane, 10-1000 ppm
Gas sensors (also known as gas detectors) are electronic devices that detect and identify different types of gasses. They are commonly used to detect toxic or explosive gasses and measure gas concentration.
Electrochemical. Electrochemical gas detectors work by allowing gases to diffuse through a porous membrane to an electrode where it is either chemically oxidized or reduced. The amount of current produced is determined by how much of the gas is oxidized at the electrode, indicating the concentration of the gas.
Gas sensors are devices that can detect the presence and concentration of various hazardous gases and vapors, such as toxic or explosive gases, volatile organic compounds (VOCs), humidity, and odors [1].
Note: For more Information refer to Datasheet
1 x AMPHENOL SGX SENSORTECH Gas Detection Sensor, Ammonia, Carbon Monoxide, Ethanol, Hydrogen, Methane, 10-1000 ppm
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
Out of stock
| Detection Gas |
Hydrogen (H2) |
|---|---|
| Detection range |
0~1000ppm |
| Working Voltage |
3.3~5.5V DC |
| Working Current |
<5mA |
| Output Signal |
I2C ,UART (0~3V) ,analog voltage |
| Working Temperature |
-20~50℃ |
| Working Humidity |
15~90%RH (non-condensing) |
| Storage Temperature |
-20~50℃ |
| Communication Protocol |
I2C ,UART and analog |
| Compatibility |
Arduino ,ESP32 ,Raspberry pi |
| Storage Humidity |
15~90%RH (non-condensing) |
| Lifespan |
>2 years (in the air) |
| Adapter Plate Size |
37 x 32mm |
Out of stock
| Gas Detection |
Carbon Dioxide (CO2) |
|---|---|
| Operating Voltage |
4.5 ~ 5.5V DC |
| Average Current |
<85mA |
| Output |
UART |
| Measuring Range |
0 ~ 50000ppm |
| Accuracy |
± (50ppm + 5% reading) |
| Preheating Time |
3min |
| Response Time |
T90 < 30s |
| Operating Temperature |
0 ~ 50 ℃ |
| Operating Humidity |
0 ~ 95% RH (no condensation) |
| Service Life |
>5 years |
Out of stock
| Heater voltage |
5.0±0.2V DC |
|---|---|
| Circuit Voltage |
5.0±0.2V DC |
| Heater Current |
56±5mA |
| Minimum impedance between Pin#2,3 and GND |
2.5MΩ |
| Operating conditions |
0Ëš~40ËšC ,30~95%RH |
| Temperature differential between inside and outside detector casing |
≤10˚C max. (see NOTE 1) |
| Test gas conditions |
1250±100ppm iso-butane in air at 20˚±2˚C ,65±5%RH |
| Circuit conditions |
VH=5.0±0.05V DC VC=5.0±0.05V DC |
Out of stock
| Model No. |
TGS2602-B00 |
|---|---|
| Heater Voltage |
5.0±0.2V DC |
| Circuit Voltage |
5.0±0.2V DC |
| Heater power consumption |
280mW (typical) |
| Heater Current |
56±5mA |
| Sensing Principle |
MOS type |
| Heater Resistance |
approx 59Ω at room temp. (typical) |
| Load Resistance |
variable 0.45kΩ min |
| Sensor Resistance |
10kΩ ~ 100kΩ in air |
| Standard Package |
TO-5 metal can |
| Target Gases |
Air contaminants (VOCs ,ammonia ,H2S ,etc.) |
| Test Gas Conditions |
normal air at 20±2˚C ,65±5%RH |
Out of stock
| Model No. |
TGS2610-C00 |
|---|---|
| Heater Current |
56±5mA |
| Heater Resistance |
approx 59Ω at room temp. |
| Heater Voltage |
5.0±0.2V DC |
| Load Resistance |
variable 0.45kΩ min |
| Sensing Principle |
MOS type |
| Circuit Voltage |
5.0±0.2V DC |
| Sensor Resistance |
1.0~10.0kΩ in 1800ppm iso-butane |
| Standard Package |
TO-5 metal can |
| Target Gases |
Butane ,LP gas |
| Test Gas Conditions |
iso-butane in air at 20±2˚C ,65±5%RH |
| Heater power consumption |
280mW VH = 5.0V DC |
Out of stock
| Model No. |
TGS5042-A00 |
|---|---|
| Target Gases |
Carbon monoxide |
| Typical detection range |
0 ~ 10 ,000ppm |
| Output current in CO |
1.2~2.4nA/ppm |
| Baseline offset(*1) |
<±10ppm equivalent |
| Operating & storage temperature (*2,*3) |
-5ËšC ~ +55ËšC |
| Operating humidity |
5 ~ 99%RH (no condensation) |
| Response time (T90) |
within 60 seconds |
| Standard test conditions |
20±2˚C ,40±10%RH |
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.