Chipsee PPC-CM4-70 compatible Industrial embedded Raspberry Pi 7 Inch PC with Case for Compute Module 4

18 People watching this product now!

SKU: rz24310730 Category: Single Board Computer

Description

The PPC-CM4-70 (CS10600RA4070P) is an industrial computer for the Raspberry Pi Compute Module 4. Available in panel form factor, the Industrial Pi features a 7-inch IPS display (1024×600 pixels and 500 nits of brightness) with a 5-point capacitive touch panel, RS232 and RS485 ports, multiple opto-isolated I/O, Ethernet, double USB, 4G/LTE (optional), ZigBee function, double TF card, on-board audio, RTC with a backup battery, audio I/O, and power management.

You can add a 4G/LTE module to the product, by choosing it in the optional modules section.

Note: This is a Raspberry Pi-embedded SBC with a 7-inch display only. Compute module does not come with this product you have to purchase it separately according to your need

Features:

The EPC-CM4-70 is full-featured, rugged, designed, and certified for industrial usage
Ready to deploy industrial applications based around the Raspberry Pi Compute Module 4
The Compute Module 4 appears in different versions depending on the size of the DDR4 and eMMC.
The product has Raspberry Pi CPU, a high-performance Broadcom BCM2711 (RPi 4) application processor.
The Industrial Pi has a 5-point capacitive touch screen, with a 1024×600 resolution
Offers stable and accurate control over the device and great image clarity

Specifications:

Form-factor: Panel
CPU: Broadcom BCM2711 (RPi 4)
Display Size (inch.): 7.0″
Resolution: 1024 X 600
Brightness (NIT): 500 NIT
Touch Screen: Capacitive
FLASH: 16GB
External storage: 2 TF card slots. One is designed for Lite version that has no eMMC. The other one is designed for storage expansion.
WiFi/BT: Depends on the Compute Module 4 selected.
ZIGBEE: Onboard Zigbee module (NOT mounted by default)
4G: Support miniPCIe slot for 4G/LTE module (neither miniPCIe Slot nor 4G LTE module is mounted by default.)
Ethernet: 1x Giga LAN
Camera: There is a camera connector compatible with the Raspberry Pi Camera connector (the camera is NOT mounted by default).
Audio: 3.5mm Audio Out Connector, Internal 2W Speaker
Buzzer: Yes
USB: 1x miniUSB OTG, 2x USB 2.0 HOST
RTC: High Accuracy RTC with Lithium Button Coin battery (Lithium Battery not included)
GPIO: Opto-Isolated GPIO, 4 Input, 4 Output, can drive up to 500mA current every Channel at most (external power source needed)
RS485: 2 Channels at most. The RS485 circuit controls the Input and Output direction automatically, there’s no need to control it from within the software.
RS232: 4 Channels at most
CAN: 1x CAN
OS: Debian
Power Input: 6~36V DC
Power Consumption: 5W
Current at 12V: 420 mA max
Working Temperature: 0°C to +60°C
Mounting Method: Panel Mounting & VESA
Weight 700 g
Dimensions: 206 × 135 × 30.1 mm

Packages Includes:

1 x Chipsee PPC-CM4-70 compatible Industrial embedded Raspberry Pi 7 Inch PC with Case for Compute Module 4

Reviews (0)

Rated 0 out of 5

0 reviews

Rated 5 out of 5

Rated 4 out of 5

Rated 3 out of 5

Rated 2 out of 5

Rated 1 out of 5

Reviews

Clear filters

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery

Shipping and Delivery Policy

1. Shipping Process:

Orders are processed within 1-2 business days after payment confirmation.
Delivery time varies based on location and selected shipping method, typically ranging between 3-7 business days.
We partner with trusted courier services to ensure timely and safe delivery.

2. Shipping Charges:

Shipping charges are calculated at checkout based on the delivery location and package weight.
Free shipping may be available for orders above a specified amount, as mentioned on our website.

3. Order Tracking:

Once your order is shipped, you will receive a tracking ID via email or SMS to monitor the shipment status.

4. Delivery Address:

Please provide a complete and accurate delivery address to avoid delays.
We are not responsible for delivery failures due to incorrect or incomplete address details provided by the customer.

5. Delivery Issues:

If a package is delayed, lost, or damaged during transit, please contact our support team immediately.
Claims for lost or damaged items must be reported within 48 hours of delivery.

6. No Return Policy for Opened/Soldered Products:

We do not accept returns for products that have been opened, used, or soldered.
Ensure you verify product compatibility before purchase, as returns will only be accepted for unopened and unused items in their original packaging.

7. Refund Policy:

Refunds will be issued only for canceled orders before shipment or wrong/damaged items received (subject to investigation).
No refunds or replacements for products that have been tampered with, soldered, or physically damaged by the customer.

Jetson AGX Xavier H01 Kit with Jetson Xavier AGX processor, 32 TOPs, Wi-Fi, Aluminum case with cooling fan, pre-installed JetPack System

Out of stock

₹179,122.81 – ₹203,548.65 (Including tax)

SKU: rz24310360

Module	Pre-installed Jetson AGX Xavier 32GB
Display	1 x HDMI 2.0 (TYPE A)
Camera	Esp.conn or USB Camera
Ethernet	1 x Gigabit Ethernet Connector (10/100/1000)
M.2 Key	E Wifi + Bluetooth
USB	1 x USB 3.0; 2 x USB 3.0 Type A (Integrated USB 2.0); 1 x USB 2.0 Micro-AB
Misc.	2 x SPI , 2 x I2C Link (+3.3V I/O); 1 x UART , 1x I2S (3.3V Level); 5 x GPIO
Fan	1 x 12V PWM (default) or 1 x 5V PWM (optional)
POWER (VDC)	: 9-19
System	Pre-installed Jetpack 4.6 OS

LattePanda Delta 432 – Tiny Ultimate Windows Linux Device 4GB32GB 1

LattePanda Delta 432(Win10 Pro Activated) – Windows / Linux Device 4GB/32GB

Out of stock

₹40,958.49 – ₹46,543.75 (Including tax)

SKU: rz24310605

ODROID-H3+ Single Board Computer

Out of stock

₹26,986.83 – ₹30,666.85 (Including tax)

SKU: rz2435074

Processor	Intel Celeron N6005 Processor (10nm , Quad-Core , TDP 10W) H3+(N6005) : up to 3.3Ghz 4MB L2 Cache Intel UHD Graphics (24/32 EU up to 900MHz)
Networking	2 x GbE LAN ports (RJ45 , supports 10/100/1000/2500 Mbps) Realtek RTL8125B Supports Wake-On-Lan LED indicators (Green: Link , Amber: Traffic
Memory	2 x DDR4 1.2V SO-DIMM slots Dual Channel , up to 2933 MT/s (DDR4-PC23400) Max memory capacity 64GB DDR3/DDR5 are not supported
Storage	1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at the Hardkernel store 2 x SATA3 6Gbps ( SATA Port-Multiplier is NOT compatible ) 1 x M.2 slot (PCIe 3.0 x 4 , supports NGFF-2280 cards) M.2 SATA SSD is not supported
Video	1 x DisplayPort 1.2 (up to 4K@60Hz) 1 x HDMI 2.0 (up to 4K@60Hz) Dual simultaneous display support
Audio	1 x Audio out (3.5mm jack) 1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC1200 , HDA codec) * HDMI & DP have audio output too.
External I/O	2 x USB 3.0 Host ports 2 x USB 2.0 Host ports 1 x Peripheral Expansion Header (24-pin , 2.54mm pitch) – 1 x DC 5V , 1 x DC 3.3V , 5 x GND – 1 x UART (TXD/RXD/RTS/CTS) – 2 x I2C (SCL/SDA) – 1 x External Power Button – HDMI CEC , 5VA+ – 3 x USB 2.0 – All 3.3V I/O signal level
Other features	Passive Heatsink BIOS Backup Battery – Maintains system time and BIOS settings Power Button Reset Button System LEDS Indicators: – Red (PWR) – Solid light when DC power is supplied – Blue (left , SLEEP) – turns off only when the system enters into suspend mode – Blue (right , PMIC) – turns on only when the major power rails are working – Amber (SATA) – Flashes when SATA data transfers – Green (NVMe) – Flashes when NVMe data transfers Active Cooling Fan Connector (12V 4-pin , PWM input + TACHO output) – Active Cooling Fan is optional – Connector (4-pin , 2.54mm pitch)
Power	DC jack : outer (ground) diameter 5.5mm , inner(positive) diameter 2.1mm DC 14V ~ 20V (up to 60W) – DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs – DC 19V/7A power adapter is recommended if you two 3.5” HDDs together Power consumption: – IDLE : ≃1..9W – CPU Stress : ≃15W – CPU+GPU Stress : ≃18W – Power-off : ≃0.25W – Suspend : ≃0.6W
Form Factor	110mm x 110mm x 47mm Approx.

ODROID-M1 with 4GByte RAM

Out of stock

₹11,522.45 – ₹13,093.69 (Including tax)

SKU: rz2435107

POWER	1 x DC jack : outer (negative) diameter 5.5mm , inner (positive) diameter 2.1mm DC input : 7.5V ~ 15.5V – DC 12V/2A power adapter is recommended – IDLE : ≃ 1.25W – CPU Stress : ≃ 4.44W (Performance governor) – Power Off : ≃ 0W
FORM FACTOR	Board Dimensions: 90mm x 122mm x 16mm Heatsink Dimensions: 100mm x 123mm x 19mm Weight: 253 g including heatsink
PROCESSOR	Rockchip RK3568 Processor L1 instruction cache: 32 KB , 4-way set associative (128 sets) , 64 byte lines , shared by 1 processor L1 data cache: 32 KB , 4-way set associative (128 sets) , 64 byte lines , shared by 1 processor L3 data cache: 512KB , 16-way set associative (512 sets) , 64 byte lines , shared by 4 processorsQuad-Core Cortex-A55 (1.992GHz) ARMv8-A architecture with Neon and Crypto extensions Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz)
NPU	0.8Tops@INT8 , integrated high-performance AI accelerator RKNN NPU Supports one-click switching of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet
MEMORY	4 or 8GiB LPDDR4 with 32-bit bus width Data rate: 3120 MT/s , up to 1 , 560MHz
STORAGE	1 x eMMC slot 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104) 1 x NVME M.2 SSD (PCIe 3.0 x 2) 1 x SATA3.0
NETWORKING	1 x GbE LAN ports (RJ45 , supports 10/100/1000 Mbps) – Realtek RTL8211F (Ethernet transceiver) – LED indicators * Green LED: Flashing by data traffics at 100Mbps connection * Amber LED: Flashing by data traffics at 1000Mbps connection
VIDEO	1 x HDMI 2.0 (up to 4K@60Hz with HDR , EDID) 1 x MIPI-DSI (works with 800 x 1280 LCD)
AUDIO	1 x 3.5mm phone jack 1 x mono speaker output 1 x HDMI sound
EXTERNAL I/O	2 x USB 2.0 host port 2 x USB 3.0 host port (or 1 x USB 3.0 host + 1 x USB 2.0 OTG port) 1 x Debug serial console (UART , 1.5Mbps N81) 1 x SATA Connector 1 x MIPI-CSI Camera Interface (15 pin) 1 x MIPI-DSI LCD Interface (31 pin) 1 x 40pin GPIO header

ODROID-XU4

Out of stock

₹8,704.23 – ₹9,891.17 (Including tax)

SKU: rz2435108

reComputer J202 – Dev Kit carrier Board for Jetson Nano/Xavier

Out of stock

₹15,522.89 – ₹17,639.65 (Including tax)

SKU: rz24310050

Model	reComputer J202
Power supply	3.3V
PCB Size / Overall Size	100mm x 80mm
Display	1 x HDMI+1 x DP
M.2 Key E	1 x M.2 Key E
M.2 Key M	1 x M.2 Key M
Ethernet	1 x Gigabit Ethernet (10/100/1000M)
CSI Camera	2 x CSI
USB	4 x USB 3.1 Type-A (10Gbps for NX , 5Gbps for Nano) 1 x USB Type-C (Device mode)

reComputer J4012 Edge AI Device with Jetson Orin NX 16GB module 7

reComputer J4012-Edge AI Device with NVIDIA Jetson Orin NX 16GB module, 4xUSB 3.2, M.2 Key E & Key M Slot, Aluminum case, Pre-installed JetPack System on 128GB NVMe SSD

Out of stock

₹115,056.13 – ₹130,745.59 (Including tax)

SKU: rz2435605

Model	reComputer J4012
Variant	Jetson Orin NX 16GB
AI Performance	100 TOPS
GPU	1024-core NVIDIA Ampere architecture GPU with 32 Tensor Cores
GPU Max Frequency	918 MHz
CPU	8-core Arm® Cortex®-A78AE v8.2 64-bit CPU 2MB L2 + 4MB L3
CPU Max Frequency	2 GHz
Memory	16GB 128-bit LPDDR5 102.4GB/s
DL Accelerator	2x NVDLA v2
DLA Max Frequency	614 MHz
Vision Accelerator	1x PVA v2
Video Encoder	1x 4K60 (H.265) , 3x 4K30 (H.265) 6x 1080p60 (H.265) , 12x 1080p30 (H.265)
Video Decoder	1x 8K30 (H.265) , 2x 4K60 (H.265) , 4x 4K30 (H.265) 9x 1080p60 (H.265) , 18x 1080p30 (H.265)
Display	1* HDMI 2.1
CSI Camera	2* CSI （2-lane 15pin）
M.2 Key	1* M.2 Key M 1* M.2 Key E
Fan	1* 4 pin Fan Connector(5V PWM)
CAN	1* CAN
Multifunctional Port	1* 40-Pin Expansion header , 1* 12-Pin Control and UART header
RTC	RTC 2-pin , RTC socket
Operating Voltage	9-19V
Power Supply	DC 12V/5A(Barrel Jack 5.5/2.1mm)
Operating Temperature	-10℃~60℃
Dimension (mm)	130 x 120 x 58.5

reServer J2032 Edge AI Device with Jetson Xavier NX 16GB, 256GB

Out of stock

₹171,121.93 – ₹194,456.75 (Including tax)