-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹5,717.05 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹5,431.18 (Including tax) |
11 - 20 | 8% | ₹5,259.67 (Including tax) |
21 - 40 | 10% | ₹5,145.34 (Including tax) |
41 - 100 | 12% | ₹5,031.00 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
MH-Z16 NDIR Infrared gas module is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature sensor can do temperature compensation; and it has digital output . This commons type infrared gas sensor is developed by the tight integration of mature infrared absorbing gas detection technology, Precision optical circuit design and superior circuit design.
1 x Winsen MH-Z16 NDIR CO2 SENSOR
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Particle Measurement Range |
0.3~1.0μm; 1.0~2.5μm; 2.5~10μm |
---|---|
Particle Counting Efficiency |
50%@0.3μm ,98%@>=0.5μm |
Resolution of Particle Mass Concentration |
1μg/mᶟ |
Temperature Measurement Range |
0~99℃ |
Temperature Measurement Resolution |
0.1℃ |
Humidity Measurement Range |
0~99% |
Humidity Measurement Resolution |
0.1% |
Humidity Measurement Accuracy |
±2% |
Single Response Time |
<1s |
Comprehensive Response Time |
≤10s |
DC Supply Voltage |
Typ: 5V Min: 4.5V Max: 5.5V |
Working Current |
≤100mA |
Standby Current |
≤200mA |
Data Interface Level |
L<0.8V ,H>2.7V ,maximum level voltage 3.3V |
Working Temperature Range |
10~50℃ |
Working Humidity Range |
0~99% |
Storage Temperature Range |
40~80℃ |
Out of stock
Out of stock
Model |
DFRobot Gravity NH3 Sensor |
---|---|
Detection Gas |
Ammonia (NH3) |
Detection range |
0~100ppm |
Working Voltage |
3.3~5.5V DC |
Working Current |
<5mA |
Output Signal |
I2C ,UART (0~3V) ,analog voltage |
Compatibility |
Arduino ,ESP32 ,Raspberry pi |
Lifespan |
>2 years (in the air) |
Working Humidity Range |
15~90%RH (non-condensing) |
Working Temperature Range (°C) |
-20~50℃ |
Product Dimensions |
37 x 32mm |
Out of stock
Out of stock
Heater voltage |
5.0±0.2V DC |
---|---|
Circuit Voltage |
5.0±0.2V DC |
Heater Current |
56±5mA |
Minimum impedance between Pin#2,3 and GND |
2.5MΩ |
Operating conditions |
0Ëš~40ËšC ,30~95%RH |
Temperature differential between inside and outside detector casing |
≤10˚C max. (see NOTE 1) |
Test gas conditions |
1250±100ppm iso-butane in air at 20˚±2˚C ,65±5%RH |
Circuit conditions |
VH=5.0±0.05V DC VC=5.0±0.05V DC |
Out of stock
Model No. |
TGS2610-C00 |
---|---|
Heater Current |
56±5mA |
Heater Resistance |
approx 59Ω at room temp. |
Heater Voltage |
5.0±0.2V DC |
Load Resistance |
variable 0.45kΩ min |
Sensing Principle |
MOS type |
Circuit Voltage |
5.0±0.2V DC |
Sensor Resistance |
1.0~10.0kΩ in 1800ppm iso-butane |
Standard Package |
TO-5 metal can |
Target Gases |
Butane ,LP gas |
Test Gas Conditions |
iso-butane in air at 20±2˚C ,65±5%RH |
Heater power consumption |
280mW VH = 5.0V DC |
Out of stock
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.