Single Board Computer
Chipsee EPC-CM4-70 Industrial embedded Raspberry Pi Compute Module 4 compatible 7 Inch PC
Out of stock
Jetson Mate – NVIDIA Jetson Nano/NX Carrier Board for GPU Cluster and Server
Out of stock
LattePanda V1 – A Powerful Windows 10 Mini PC 2GB/32GB
Out of stock
NVIDIA Jetson Nano Module
Out of stock
| Product Name |
NVIDIA Jetson Nano Module |
|---|---|
| GPU |
NVIDIA Maxwell architecture with 128 NVIDIA CUDA® cores |
| CPU |
Quad-core ARM Cortex-A57 MP Core processor |
| AI Performance |
0.5 TFLOPS (FP16) |
| Memory |
4 GB 64-bit LPDDR4 ,1600MHz 25.6 GB/s |
| Storage |
16 GB eMMC 5.1 |
| Video Encoder |
250MP/sec(1x 4K @ 30 (HEVC) ,2x 1080p @ 60 (HEVC) ,4x 1080p @ 30 (HEVC) ,4x 720p @ 60 (HEVC) ,9x 720p @ 30(HEVC)) |
| Video Decoder |
500MP/sec(1x 4K @ 60 (HEVC) ,2x 4K @ 30 (HEVC) ,4x 1080p @ 60 (HEVC) ,8x 1080p @ 30 (HEVC) ,9x 720p @ 60 (HEVC)) |
| Camera |
12 lanes (3×4 or 4×2) MIPI CSI-2 D-PHY 1.1 (1.5 Gb/s per pair) |
| Connectivity |
Gigabit Ethernet ,M.2 Key E |
| Display |
HDMI 2.0 and eDP 1.4 |
| USB |
4x USB 3.0 ,USB 2.0 Micro-B |
| Other |
GPIO ,I2C ,I2S ,SPI ,UART |
| Mechanical |
69.6 mm x 45 mm ,260-pin edge connector |
| Power Consumptions |
5-10W |
| Dimensions |
45 x 70mm |
reComputer J202 – Dev Kit carrier Board for Jetson Nano/Xavier
Out of stock
Arducam 8MP Synchronized Stereo Camera Bundle Kit for Jetson Nano
Out of stock
ODROID-M1 with 4GByte RAM
Out of stock
| POWER |
1 x DC jack : outer (negative) diameter 5.5mm ,inner (positive) diameter 2.1mm DC input : 7.5V ~ 15.5V – DC 12V/2A power adapter is recommended – IDLE : ≃ 1.25W – CPU Stress : ≃ 4.44W (Performance governor) – Power Off : ≃ 0W |
|---|---|
| FORM FACTOR |
Board Dimensions: 90mm x 122mm x 16mm Heatsink Dimensions: 100mm x 123mm x 19mm Weight: 253 g including heatsink |
| PROCESSOR |
Rockchip RK3568 Processor L1 instruction cache: 32 KB ,4-way set associative (128 sets) ,64 byte lines ,shared by 1 processor L1 data cache: 32 KB ,4-way set associative (128 sets) ,64 byte lines ,shared by 1 processor L3 data cache: 512KB ,16-way set associative (512 sets) ,64 byte lines ,shared by 4 processorsQuad-Core Cortex-A55 (1.992GHz) ARMv8-A architecture with Neon and Crypto extensions Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz) |
| NPU |
0.8Tops@INT8 ,integrated high-performance AI accelerator RKNN NPU Supports one-click switching of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet |
| MEMORY |
4 or 8GiB LPDDR4 with 32-bit bus width Data rate: 3120 MT/s ,up to 1 ,560MHz |
| STORAGE |
1 x eMMC slot 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104) 1 x NVME M.2 SSD (PCIe 3.0 x 2) 1 x SATA3.0 |
| NETWORKING |
1 x GbE LAN ports (RJ45 ,supports 10/100/1000 Mbps) – Realtek RTL8211F (Ethernet transceiver) – LED indicators * Green LED: Flashing by data traffics at 100Mbps connection * Amber LED: Flashing by data traffics at 1000Mbps connection |
| VIDEO |
1 x HDMI 2.0 (up to 4K@60Hz with HDR ,EDID) 1 x MIPI-DSI (works with 800 x 1280 LCD) |
| AUDIO |
1 x 3.5mm phone jack 1 x mono speaker output 1 x HDMI sound |
| EXTERNAL I/O |
2 x USB 2.0 host port 2 x USB 3.0 host port (or 1 x USB 3.0 host + 1 x USB 2.0 OTG port) 1 x Debug serial console (UART ,1.5Mbps N81) 1 x SATA Connector 1 x MIPI-CSI Camera Interface (15 pin) 1 x MIPI-DSI LCD Interface (31 pin) 1 x 40pin GPIO header |
ODROID-N2L with 4GByte RAM
Out of stock
| Processor |
Amlogic S922X Processor (12nm) Quad-core Cortex-A73(2.2Ghz) and Dual-core Cortex-A53(2Ghz) ARMv8-A architecture with Neon and Crypto extensions Mali-G52 GPU with 6 x Execution Engines (800Mhz) |
|---|---|
| Power |
1 x DC jack : outer (negative) diameter 5.5mm ,inner(positive) diameter 2.1mm 7.5V ~ 16V (Recommend range of input) – DC 12V/2A power adapter is recommendedPower consumption: – IDLE : ≃ 1.5W (Performance governor) ,1.3W(Conservative governor) – CPU Stress (Passive Heat-Sink) : ≃ 5.4W (@1908/2208MHz ,Stock) ,5.8W (@2016/2400MHz ,Overclock) – CPU Stress (Active Cooling-FAN) : ≃ 6.1W (@1908/2208MHz ,Stock) ,6.4W (@2016/2400MHz ,Overclock) – Power-Off : ≃ 0.2W |
| Memory |
LPDDR4 4GiB or 2GiB with 32-bit bus width Data rate: 3216 MT/s 1.1Volt low power design |
| Storage |
1 x eMMC connector (8G ,16G ,32G ,64G and 128G are available) 1 x microSD slot (DS/HS modes up to UHS-I SDR104) |
| Networking |
Optional WiFi or Ethernet USB adapters |
| Video |
1 x HDMI 2.0 (up to 4K@60Hz with HDR ,CEC ,EDID) – Although the +5V Power pin is able to supply a minimum of 300mA ,according to HDMI 2.0 specification ,a sink shall not draw more than 50mA of current from the +5V Power pin. |
| Audio |
1 x HDMI digital output |
| External I/O |
1 x USB 3.0 Host port 1 x USB 2.0 Host port 1 x Debug serial console (UART) 1 x MIPI DSI 4Lane (TBD) 1 x Peripheral Expansion Header (40-pin ,2.54mm pitch) – 2 x DC 5V ,2 x DC 3.3V ,1 x DC 1.8V ,8 x GND – 1 x SPI – 1 x UART – 2 x I2C – 25 x GPIO (Max) – 2 x ADC input (10bit ,1.8V Max) – All of I/O signal level is 3.3 Volt except for ADC input at max 1.8 Volt |
| Other features |
Built with a large passive heatsink System LEDS Indicators: – Red (PWR) – Solid light when DC power is connected – Blue (ALIVE) – Flashing like heartbeat while Kernel is running. Active Cooling Fan Connector (5V 2-pin) – Connector (2-pin ,1.25mm pitch) |
| Dimensions |
Dimensions including Fan heatsink: 69mm x 56mm x 22mm Dimensions including Tall heatsink: 69mm x 56mm x 32mm |
| Weight (gm) |
66g including a Tall heatsink |
ODROID-N2L with 2GByte RAM
Out of stock
BeagleBone Black Industrial AM3358 ARM Cortex-A8, 512MB RAM, 4GB eMMC, USB Interface
Out of stock
ODROID-XU4Q Single Board Computer
Out of stock
| Processor |
Samsung Exynos5422 ARM® Cortex™-A15 Quad 2.0GHz/Cortex™-A7 Quad 1.4GHz |
|---|---|
| Memory |
2Gbyte LPDDR3 RAM PoP (750Mhz ,12GB/s memory bandwidth ,2x32bit bus) |
| 3D Accelerator |
Mali-T628 MP6 OpenGL ES 3.1 / 3.0 / 2.0 / 1.1 and OpenCL 1.2 Full profile |
| Audio |
HDMI Digital audio output. Optional USB sound card |
| USB3.0 Host |
SuperSpeed USB standard A-type connector x 2 port |
| USB2.0 Host |
HighSpeed USB standard A type connector x 1 port |
| Display |
HDMI 1.4a with a Type-A connector |
| Storage (Option) |
eMMC module socket : eMMC 5.0 Flash Storage (up to 64GByte) |
| MicroSD Card Slot |
up to 128GByte |
| Fast Ethernet LAN |
10/100/1000Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support) |
| WiFi (Option) |
USB IEEE 802.11 ac/b/g/n 1T1R WLAN with Antenna (External USB adapter) |
| HDD/SSD SATA interface (Optional) |
SuperSpeed USB (USB 3.0) to Serial ATA3 adapter for 2.5″/3.5″ HDD and SSD storage |
| Power Input |
4.8Volt~5.2Volt (5V/4A Power supply is recommended) |
| System Software |
Ubuntu 16.04 + OpenGL ES + OpenCL on Linux Kernel 4.14 LTS Android 4.4.2 on Kernel LTS 3.10 Android 7.1 is available as a community driven OS development. Full source code is accessible via our Github. |
| Dimensions (L x W x H) mm |
83 x 58 x 20 |
| Weight (gm) |
38 (without cooler approx.) |