This is a 10 Segments 4 Colors Stripe Digital Tubes 2R3Y4G1B Cathode（BAS). Make a small linear display with a glowing 4  color using this elegant LED bar graph only 1″ long. 10 LEDs are contained in the plastic body. This display is bright, beautiful, and funky with nice diffused rectangular lenses for a striking look. There are 20 pins, 10 on each side, with 0.1″ spacing so you can easily plug it into a breadboard with plenty of space for wiring left over.

Features:

1. built-in chip.
2. 5050 Highlight LED.
3.  It is equipped with an I / O interface that can control multiple LEDs.
4.  it can finish data reception and decoding in one piece.
5. RGB 256 level brightness adjustment, 160,000 color image display effect, sweep frequency not less than 400Hz / S.

Package Includes:

1 x 10 Segments 4 Colors Stripe Digital Tubes 2R3Y4G1B Cathode（BAS）

Make a small linear display with a glowing white color using this elegant LED bar graph only 1″ long. 10 LEDs are contained in the plastic body. This display is bright, beautiful, and funky with nice diffused rectangular lenses for a striking look. There are 20 pins, 10 on each side, with 0.1″ spacing so you can easily plug it into a breadboard with plenty of space for wiring left over.

Features:

1. built-in chip.
2. 5050 Highlight LED.
3.  It is equipped with an I / O interface that can control multiple LEDs.
4.  it can finish data reception and decoding in one piece.
5. RGB 256 level brightness adjustment, 160,000 color image display effect, sweep frequency not less than 400Hz / S.

Package Includes:

1 x White 10 Segment LED Display

A seven-segment display (SSD), is a form of an electronic display device for displaying decimal numerals that is an alternative to the more complex dot matrix displays.

The segment is a combination of 7 LED lines or segments. The segments of the display lights in different combinations to display Numbers from 0 to 9, the Arabic Numerals.  The number is displayed by the code or any encoder-decoder IC which gives the command to light LED to make combinations and display numbers.

Features:

1. Type: Common Anode
2. Color: RED
3. Low Current Consumption
4. High Brightness
5. Easy to Use
6. PCB Mounting
7. Black face and white segments
8. It is widely used in digital clocks, electronic meters, basic calculators, and other electronic devices that display numerical information.

Package Includes:

1 x 0.56 inch Red 1 Digit 7 Segment LED Display 10pin

 This is a Green 10 Segment LED Display. Make a small linear display with a glowing green color using this elegant LED bar graph only 1″ long. 10 LEDs are contained in the plastic body. This display is bright, beautiful, and funky with nice diffused rectangular lenses for a striking look. There are 20 pins, 10 on each side, with 0.1″ spacing so you can easily plug it into a breadboard with plenty of space for wiring left over.

Features:

1. built-in chip.
2. 5050 Highlight LED.
3.  It is equipped with an I / O interface that can control multiple LEDs.
4.  it can finish data reception and decoding in one piece.
5. RGB 256 level brightness adjustment, 160,000 color image display effect, sweep frequency not less than 400Hz / S.

Package Includes:

1 x Green 10 Segment LED Display

This module is a 2 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube. The commonly used 7-segment display can only display the numbers 0-9 and a limited number of letters. In contrast, the 14-segment digital display does not have this limitation, it can display all the characters, that’s why we call it an alphanumeric display. The digit height is 0.54 inch and the red LED used in this module has super high brightness, so you can see it a few meters away.

Usually, the 14-segment display needs to use 17 or more wires to control the display, which means that a large amount of IO of your main control board (such as Arduino) will be occupied. With the help of onboard HT16K33 chip and Grove connector, we made it an i2c display, only four wires are enough. No troublesome soldering and no complicated wiring, if you are using seeeduino, it is really plugged and play, easy peasy.

Getting started with SeeedStudio Grove 0.54″ Red Dual Alphanumeric Display

Features: 

1. Can display all letters and numbers
2. Ultra-high brightness:30mcd
3. Grove I2C, only takes two IO pins
4. Onboard drivers, easy to use
5. Cathode display

Application:

1. Display speed, temperature, etc.
2. Letter display

Specification:

1. Supply voltage: 3.3V / 5V
2. Operating ambient temperature: -30°C to 85°C
3. LED DisplayJM-S05422AH-001
4. LED Controller Driver: HT16K33
5. LED Color: Red
6. Ultra-high brightness: 30mcd
7. LED height: 0.54inch
8. LED segment: 14
9. Size: 40 * 40mm
10. Output interface: I2C
11. I2C Address(Selectable) 0x70(Default)

Package Includes :

1 x SeeedStudio Grove 0.54″ Red Dual Alphanumeric Display
1 x JST cable

 This is a Green Yellow 10 segment LED Display. Make a small linear display with a glowing GreenYellow color using this elegant LED bar graph only 1″ long. 10 LEDs are contained in the plastic body. This display is bright, beautiful, and funky with nice diffused rectangular lenses for a striking look. There are 20 pins, 10 on each side, with 0.1″ spacing so you can easily plug it into a breadboard with plenty of space for wiring left over.

Features:

1. built-in chip.
2. 5050 Highlight LED.
3.  It is equipped with an I / O interface that can control multiple LEDs.
4.  it can finish data reception and decoding in one piece.
5. RGB 256 level brightness adjustment, 160,000 color image display effect, sweep frequency not less than 400Hz / S.

Package Includes:

1 x GreenYellow 10 Segment LED Display