Carbon Fiber tube can be used to replace aluminium or steel tubes in a wide range of projects. The Carbon Fiber tube of the same weight as an aluminium or steel tube can be much stronger and lighter. This 10mm roll wrapped carbon Fiber tube is manufactured predominantly using high modulus (T700) unidirectional prepreg carbon Fiber oriented to provide maximum strength in the lateral axis.

These tubes are made of High Strength Carbon fibres and epoxy resin. The outside has a nice “twill” weave, whereby the carbon fibres are woven in different angles, which gives the tubes great strength and stiffness at minimum weight. When it comes to flexing, these carbon tubes perform much better than metal ones.

Roll wrapped carbon Fiber tubes offer superior strength in general use to ‘pultruded’ tubes (which have all their Fibers running in exactly the same direction.

Roll Wrapping:

The phrase ‘roll wrapped’ refers to the process used to manufacture these tubes. The prepreg carbon Fiber is first laid up around a mandrel in multiple layers. Once the reinforcement is in place it is spiral-wrapped with heat-shrink tape before the whole assembly is oven cured.

Features:

1. Made of Carbon Fiber material
2. High Strength
3. Stable dimension and UV resistant
4. High Corrosion  Resistance
5. Electrical & Thermal Non-Conductivity

Package Includes:

1 x 3K Mold Presssed Square Carbon Fiber Tube (Hollow)20mm(OD)*18mm(ID)*500mm(L)

Pultruded carbon fiber rod (Solid) 8mm * 1000mm offer extremely high strength and stiffness because they contain 95% unidirectional carbon fiber running longitudinally. Carbon Fiber Solid Rods are made from continuous carbon fibres in a resin matrix of either vinyl-ester or epoxy.

Carbon fiber rod is used in a wide range of applications including aerospace and motor racing but perhaps its most common use in recreational sports equipment like kites and radio-controlled models.

Pultrusion :

Pultrusion is a method of manufacturing continuous lengths of a fibre-reinforced section by pulling continuous strands of carbon fiber through resin and a former before curing the resin all in one process.

Features:

1. Made of Carbon Fiber material
2. Very Strong and Light
3. high strength and stiffness
4. Very high Rigidity
5. very low coefficient of expansion

Package Includes:

1 x Pultruded Carbon Fiber Rod (Solid) 8mm * 1000mm

Pultruded carbon fiber rod (Solid) 6mm * 1000mm offer extremely high strength and stiffness because they contain 95% unidirectional carbon fiber running longitudinally. Carbon Fiber Solid Rods are made from continuous carbon fibres in a resin matrix of either vinyl-ester or epoxy.

Carbon fiber rod is used in a wide range of applications including aerospace and motor racing but perhaps its most common use in recreational sports equipment like kites and radio-controlled models.

Pultrusion :

Pultrusion is a method of manufacturing continuous lengths of a fibre-reinforced section by pulling continuous strands of carbon fiber through resin and a former before curing the resin all in one process.

Features:

1. Made of Carbon Fiber material
2. Very Strong and Light
3. high strength and stiffness
4. Very high Rigidity
5. very low coefficient of expansion

Package Includes:

1 x Pultruded Carbon Fiber Rod (Solid) 6mm * 1000mm (Pack of 2)

Carbon fibre tube can be used to replace aluminium or steel tubes in a wide range of projects. The Carbon fibre tube of the same weight as an aluminium or steel tube can be much stronger and lighter. This 10mm roll wrapped carbon fibre tube is manufactured predominantly using high modulus (T700) unidirectional prepreg carbon fibre oriented to provide maximum strength in the lateral axis.

Roll wrapped carbon fibre tubes offer superior strength in general use to ‘pultruded’ tubes (which have all their fibres running in exactly the same direction.

The use of unidirectional fibres and maximum strength in the lateral axis does mean that the tube is not strong across its diameter as it is along its length so should be used in such a way as to avoid unnecessary crushing forces across the tube.

Roll Wrapping:

The phrase ‘roll wrapped’ refers to the process used to manufacture these tubes. The prepreg carbon fibre is first laid up around a mandrel in multiple layers. Once the reinforcement is in place it is spiral-wrapped with heat-shrink tape before the whole assembly is oven cured.

Features:

1. Made of Carbon Fiber material
2. High Strength
3. Stable dimension and UV resistant
4. High Corrosion  Resistance
5. Electrical & Thermal Non-Conductivity

Package Includes:

1 x 3K Roll-wrapped Carbon Fibre Tube (Hollow) 10mm(OD) * 8mm(ID) * 1000mm(L)

Carbon fiber tube can be used to replace aluminum or steel tubes in a wide range of projects. The Carbon fiber tube of the same weight as an aluminum or steel tube can be much stronger and lighter. This 40mm roll wrapped carbon fiber tube is manufactured predominantly using high modulus (T700) unidirectional prepreg carbon fiber oriented to provide maximum strength in the lateral axis.

Roll wrapped carbon fiber tubes offer superior strength in general use to ‘pultruded’ tubes (which have all their fibers running in exactly the same direction.

The use of unidirectional fibers and maximum strength in the lateral axis does mean that the tube is not strong across its diameter as it is along its length so should be used in such a way as to avoid unnecessary crushing forces across the tube.

Features:

1. Made of Carbon Fiber material
2. High Strength & lightweight
3. Stable dimension and UV resistant
4. High Corrosion  Resistance
5. Electrical & Thermal Non-Conductivity

Specifications:

1. Length: 1000mm
2. Outer Diameter: 25mm
3. Inner Diameter: 23mm
4. Material: Carbon Fiber
5. Weight: 134g

Packages Includes:

1 x 3K Carbon Fiber Tube (Hollow) OD25 x ID23 x L1000 MM

Pultruded carbon fiber rod (Solid) 8mm * 500mm offer extremely high strength and stiffness because they contain 95% unidirectional carbon fiber running longitudinally. Carbon Fiber Solid Rods are made from continuous carbon fibres in a resin matrix of either vinyl-ester or epoxy.

Carbon fiber rod is used in a wide range of applications including aerospace and motor racing but perhaps its most common use in recreational sports equipment like kites and radio-controlled models.

Pultrusion :

Pultrusion is a method of manufacturing continuous lengths of a fibre-reinforced section by pulling continuous strands of carbon fiber through resin and a former before curing the resin all in one process.

Features:

1. Made of Carbon Fiber material
2. Very Strong and Light
3. high strength and stiffness
4. Very high Rigidity
5. very low coefficient of expansion

Package Includes:

1 x Pultruded Carbon Fiber Rod (Solid) 8mm * 500mm- (Pack of 2)