4558D DIP Dual Operational Amplifier IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x 4558D DIP Dual Operational AmplifierIC DIP-8 Package

OP177 IC Ultra Precision Operational Amplifier IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x OP177IC Ultra Precision Operational AmplifierIC SMD-8 Package

OP07 Ultralow Offset Voltage Op-Amp IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x OP07 Ultralow Offset Voltage Op-AmpIC DIP-8 Package

The LM393 series are dual independent precision voltage comparators capable of single or split supply operation. These devices are designed to permit a common mode range−to−ground level with single supply operation. Input offset voltage specifications as low as 2.0 mV make this device an excellent selection for many applications in consumer, automotive, and industrial electronics.

Features:

1. Very Low Current Drain Independent of Supply Voltage: 0.4 mA
2. Input Common Mode Range to Ground Level
3. Differential Input Voltage Range Equal to Power Supply Voltage
4. Output Voltage Compatible with DTL, ECL, TTL, MOS, and CMOS
   Logic Levels
5. ESD Clamps on the Inputs Increase the Ruggedness of the Device
   without Affecting Performance
6. NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
7. These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
   Compliant

Specifications: 

1. Wide Single−Supply Range: 2.0 Vdc to 36 Vdc
2. Split−Supply Range: ±1.0 Vdc to ±18 Vdc
3. Low Input Bias Current: 25 nA
4. Low Input Offset Current: 5.0 nA
5. Low Input Offset Voltage: 5.0 mV (max) LM293/393
6. Wide Single−Supply Range: 2.0 Vdc to 36 Vdc
7. Split−Supply Range: ±1.0 Vdc to ±18 Vdc

Packages Includes:

1 x LM393 Low Power Low Offset Voltage Dual Comparator – SMD

The 74LVC1G32 provides one 2-input OR function. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V applications. Schmitt trigger action at all inputs makes the circuit tolerant of slower input rise and fall time. This device is fully specified for partial-power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down

Features:

1. High noise immunity
2. CMOS low power consumption
3. Direct interface with TTL levels

Specifications:

Voltage – Supply: 1.65V ~ 5.5V
Current – Quiescent (Max): 4µA
Current – Output High, Low: 32mA, 32mA
Logic Level – Low: 0.7V ~ 0.8V
Logic Level – High: 1.7V ~ 2V
Max Propagation Delay @ V, Max CL 4ns @ 5V, 50pF
Operating Temperature: -40°C ~ 125°

Package Includes:

1 x 74LVC1G32GW,125 – 5.5V Rail-to-Rail Output Operational Amplifier 5-Pin TSSOP (Nexperia)

MC33078 Dual High Speed Low Noise Op-Amp IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x MC33078 Dual High Speed Low Noise Op-AmpIC DIP-8 Package