-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹1,762.75 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹1,674.60 (Including tax) |
11 - 20 | 8% | ₹1,621.72 (Including tax) |
21 - 40 | 10% | ₹1,586.47 (Including tax) |
41 - 100 | 12% | ₹1,551.21 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
ACD10 uses the principle of non-dispersive infrared (NDIR) to detect the concentration of carbon dioxide in the air. ACD10 has the advantages of good selectivity, no oxygen dependence, and long life; built-in temperature compensation; with digital interface output, easy to use. ACD10 is a high-performance sensor that combines infrared absorption gas detection technology, precise optical circuit design, and high-precision signal detection circuit design.
1 x CO2 Sensor Model ACD10
Model |
ACD10 |
---|---|
Product Type |
Infrared carbon dioxide sensor |
Operating Voltage |
4.75-5.25V |
Working Current Average current |
<45mA |
Typical Power |
225mW@5V |
Measuring Range |
400~5000ppm |
Precision |
±(50ppm+5% reading) |
Preheat Time |
120 seconds |
Operating Conditions |
-10℃~+50℃; 0~95%RH (non-condensing) |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
Particle Measurement Range |
0.3~1.0μm; 1.0~2.5μm; 2.5~10μm |
---|---|
Particle Counting Efficiency |
50%@0.3μm ,98%@>=0.5μm |
Resolution of Particle Mass Concentration |
1μg/mᶟ |
Temperature Measurement Range |
0~99℃ |
Temperature Measurement Resolution |
0.1℃ |
Humidity Measurement Range |
0~99% |
Humidity Measurement Resolution |
0.1% |
Humidity Measurement Accuracy |
±2% |
Single Response Time |
<1s |
Comprehensive Response Time |
≤10s |
DC Supply Voltage |
Typ: 5V Min: 4.5V Max: 5.5V |
Working Current |
≤100mA |
Standby Current |
≤200mA |
Data Interface Level |
L<0.8V ,H>2.7V ,maximum level voltage 3.3V |
Working Temperature Range |
10~50℃ |
Working Humidity Range |
0~99% |
Storage Temperature Range |
40~80℃ |
Out of stock
Model |
DFRobot Gravity NH3 Sensor |
---|---|
Detection Gas |
Ammonia (NH3) |
Detection range |
0~100ppm |
Working Voltage |
3.3~5.5V DC |
Working Current |
<5mA |
Output Signal |
I2C ,UART (0~3V) ,analog voltage |
Compatibility |
Arduino ,ESP32 ,Raspberry pi |
Lifespan |
>2 years (in the air) |
Working Humidity Range |
15~90%RH (non-condensing) |
Working Temperature Range (°C) |
-20~50℃ |
Product Dimensions |
37 x 32mm |
Out of stock
Out of stock
Heater voltage |
5.0±0.2V DC |
---|---|
Circuit Voltage |
5.0±0.2V DC |
Heater Current |
56±5mA |
Minimum impedance between Pin#2,3 and GND |
2.5MΩ |
Operating conditions |
0Ëš~40ËšC ,30~95%RH |
Temperature differential between inside and outside detector casing |
≤10˚C max. (see NOTE 1) |
Test gas conditions |
1250±100ppm iso-butane in air at 20˚±2˚C ,65±5%RH |
Circuit conditions |
VH=5.0±0.05V DC VC=5.0±0.05V DC |
Out of stock
Out of stock
Model No. |
TGS2611-C00 |
---|---|
Sensing Principle |
MOS type |
Standard Package |
TO-5 metal can |
Target Gases |
Methane ,Natural Gas |
Heater Voltage |
5.0±0.2V DC |
Circuit Voltage |
5.0±0.2V DC |
Load Resistance |
variable 0.45kΩ min. |
Heater Resistance |
approx 59Ω at room temp. |
Heater Current |
56±5mA |
Heater power consumption |
280mW±25mW |
Sensor Resistance |
0.68~6.8kΩ in 5000ppm methane |
Test Gas Conditions |
Methane in air at 20±2˚C ,65±5%RH |
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.