-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹4,069.65 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹3,866.17 (Including tax) |
11 - 20 | 8% | ₹3,744.06 (Including tax) |
21 - 40 | 10% | ₹3,662.69 (Including tax) |
41 - 100 | 12% | ₹3,581.29 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
The Arduino zero is a simple and powerful 32-bit extension of the platform established by the UNO. The Zero board expands the family by providing increased performance, enabling a variety of project opportunities for devices, and acts as a great educational tool for learning about 32-bit application development.
The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex M0+ core. One of its most important features is Atmel’s Embedded Debugger (EDBG), which provides a full debug interface without the need for additional hardware, significantly increasing the ease-of-use for software debugging. EDBG also supports a virtual COM port that can be used for device and boot-loader programming.
Applications:
1 X Arduino zero
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Model Type |
Leonardo |
---|---|
Microcontroller Chip |
ATmega32u4 |
Operating Voltage (VDC) |
5 |
Input Voltage(Recommended) |
7V to 12V |
Input Voltage (limit) |
6V-20V |
Analog I/O Pins |
12 |
Digital I/O Pins |
20 |
PWM Digital I/O Pins |
7 |
Clock Speed |
16 MHz |
Flash Memory |
32 KB (ATmega32u4) of which 4 KB used by bootloader |
SRAM |
2.5 KB (ATmega32u4) |
EEPROM |
1 KB (ATmega328) |
Weight (gm) |
20 |
Length (mm) |
68.6 |
Width (mm) |
53.3 |
Out of stock
Microcontroller Chip |
SAMD21 Cortex-M0+ 32bit low power ARM MCU |
---|---|
Operating Voltage (VDC) |
3.3 |
Input Voltage(Recommended) |
5 V |
Analog I/O Pins |
Input Pins:7 ,Output Pins:1 |
Digital I/O Pins |
22 |
PWM Digital I/O Pins |
12 |
Clock Speed |
48MHz |
Flash Memory |
256 KB |
SRAM |
32 KB |
DC Current for 3.3V Pin (mA) |
600 |
Dimensions in mm (LxWxH) |
61.5x25x4 |
Out of stock
Model Type |
Arduino MKR1000 WIFI |
---|---|
Microcontroller Chip |
SAMD21 Cortex-M0+ 32bit low power ARM MCU |
Operating Voltage (VDC) |
5V |
Analog I/O Pins |
(Input Pin )7 (ADC 8/10/12 bit) ,(Output Pins) 1 (DAC 10 bit) |
Digital I/O Pins |
8 pins |
PWM Digital I/O Pins |
12 (0 ,1 ,2 ,3 ,4 ,5 ,6 ,7 ,8 ,10 ,A3 – or 18 – ,A4 -or 19) |
Clock Speed |
32.768 kHz (RTC) ,48 MHz |
Flash Memory |
256 KB (internal) |
SRAM |
32 KB |
EEPROM |
NO |
LED_BUILTIN |
6 |
DC CURRENT PER I/O PIN |
7mA |
EXTERNAL INTERRUPTS |
8 (0 ,1 ,4 ,5 ,6 ,7 ,8 ,A1 -or 16- ,A2 – or 17) |
SUPPORTED BATTERY |
Li-Po single cell ,3.7V ,700mAh minimum |
UART |
1 |
SPI |
1 |
12C |
1 |
Length(cm) |
6 |
Width (cm) |
2.5 |
Hight (mm) |
.5 |
Weight (gm) |
0.007 |
Out of stock
Microcontroller |
nRF52840 |
---|---|
Operating Voltage |
3.3V |
Input Voltage (Limit) |
21V |
DC Current per I/O Pin |
15mA |
Clock Speed |
64MHz |
CPU Flash Memory |
1MB |
SRAM |
256KB |
EEPROM |
none |
Digital Input / Output Pins |
14 |
PWM pins |
All Digital Pins |
UART |
1 |
SPI |
1 |
I2C |
1 |
Analog Input Pins |
8 (ADC 12 bit 200 ksamples) |
Analog Output Pins |
Only through PWM (no DAC) |
USB |
Native in the nRF52840 Processor |
IMU |
9 axis IMU Its a Combination of two (BMI270 – 6 axis IMU and BMM150 – 3 axis IMU). |
Microphone |
MP34DT05 |
Gesture, light, proximity |
APDS9960 |
Barometric pressure |
LPS22HB |
Temperature, humidity |
HTS221 |
Length (mm) |
45 |
Width (mm) |
18 |
Weight (gm) |
5 |
Out of stock
Microcontroller |
64 MHz Arm® Cortex M4 (nRF52832) |
---|---|
Sensors |
& humidity sensor with AI ,BHI260AP – Self-learning AI smart sensor with ,BME688 – Digital low power gas ,pressure ,temperature ,Digital pressure sensor ,BMM150 – Geomagnetic sensor ,integrated accelerometer and gyroscope ,BMP390 – |
I/O Ports |
(with ext. ESLOV connector) ,1x serial port ,1x SPI ,2x ADC ,programmable I/O voltage from 1.8-3.3V ,Castellated pins with the following features: 1x I2C bus |
Connectivity |
Bluetooth® 4.2 |
Operating Power |
Micro USB (USB-B) ,Pin Header ,3.7V Li-po battery with Integrated battery charger |
Memory |
2MB QSPI dedicated for BHI260AP ,512KB Flash / 64KB RAM ,2MB SPI Flash for storage |
Interface |
USB interface with debug functionality |
Dimensions (mm) LxWxH |
22 ,86 mm x 22 ,86 mm |
Weight (g) |
2 g |
Out of stock
Microcontroller |
core up to 480 Mhz + M4 core up to 240 Mhz ,STMicroelectronics STM32H747AII6 Dual ARM® Cortex® – M7 |
---|---|
Sensors |
2 MP Color Camera ,6-Axis IMU (LSM6DSOX) ,Distance ,Time Of Flight sensor (VL53L1CBV0FY/1) ,Microphone (MP34DT05) |
I/O Ports |
(with ESLOV connector) ,1x serial port; 1x SPI; ,2x ADC Programmable I/O voltage from 1.8-3.3V ,Castellated pins with the following features: 1x I2C bus ,JTAG ,Power and GPIO pin headers |
Security |
NXP® SE050C2 Crypto chip |
Operating Power |
High speed USB (500mbps); Pin Header; 3.7V Li-po battery ,with Integrated battery charger and fuel gauge (MAX17262REWL) |
Connectivity |
(Murata® 1DX – LBEE5KL1DX-883) ,Wi-Fi / Bluetooth® Low Energy 4.2 |
Memory |
2MB Flash / 1MB RAM; 16MB QSPI Flash for storage |
Interface |
USB interface with debug functionality |
Operating Temperature (°C) |
-20° C to +70° C (-4° F to 158°F) |
Dimensions (mm) LxWxH |
22.86 mm x 22.86 mm |
Out of stock
Processor |
STM32H747XI dual Cortex®-M7+M4 32 bit low power Arm MCU (Portenta H7) |
---|---|
Input |
8 digital 24Vdc 2 channels encoder readings 3 Analog for PT100/J/K temperature probes (3-wire cable with compensation ) 3 Analog input (4-20mA/ 0-10V/NTC 10K) |
Output |
8 digital 24Vdc up to 0 ,5A (short circuit protection) 4 analog 0-10V (up to 20mA output per channel) |
Other I/O |
12 programmable digital I/O (24V logic) |
Communication Protocols |
CAN-BUS Programmable Serial port 232/422/485 |
Connectivity |
Ethernet USB Programming Port Wi-Fi Bluetooth Low Energy |
Memory |
16 MB onboard Flash memory 8MB SDRAM |
Power |
24V DC +/- 20% |
Connector Type |
Push-in terminals for fast connection |
Operating Temperature |
-40° C to +85° C (-40° F to 185°F) |
Length (mm) |
170 |
Width (mm) |
90 |
Height (mm) |
50 |
Weight (gm) |
186 |
Out of stock
Model Type |
Uno Rev3 SMD |
---|---|
Microcontroller Chip |
ATmega328P |
Operating Voltage (VDC) |
5 |
Input Voltage(Recommended) |
7 to 12 V |
Input Voltage (limit) |
6-20V |
Analog I/O Pins |
6 |
Digital I/O Pins |
14 (of which 6 provide PWM output) |
PWM Digital I/O Pins |
6 |
Clock Speed |
16 MHz |
Flash Memory |
32 KB (ATmega32u4) of which 4 KB used by bootloader |
SRAM |
2 KB (ATmega328P) |
EEPROM |
1 KB (ATmega328P) |
Weight (gm) |
25 |
Length (mm) |
68.6 |
Width (mm) |
53.4 |
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.