-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹2,441.25 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹2,319.19 (Including tax) |
11 - 20 | 8% | ₹2,245.94 (Including tax) |
21 - 40 | 10% | ₹2,197.13 (Including tax) |
41 - 100 | 12% | ₹2,148.29 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point of fast and convenient low-power IoT building. There are three categories of the FireBeetle series, containing Boards (main control), Covers (expansion boards), and related Accessories.
FireBeetle LoRa 433MHz wireless transmission module adopts a high-performance chip SX127x LoRa 433MHz and with built-in PA (power amplifier) gain, compatible with Arduino. It supports long-range monitor, FSK modulation and the maximum transmission rate is 300K[null bps]. It also supports LoRaTM, the maximum transmission rate is 37.5Kbps. The circuit current is even lower than 0.2uA in the low power mode. It can be widely used in remote home automation detection, health monitoring, and wearable device, and so on.
NOTE: All parameters related to wireless signals in the same network should maintain consistency to avoid communication problems.
1 x FireBeetle Covers-LoRa Radio 433MHz
2 x 18pin-2.54mm Pin Header
2 x 18pin-2.54mm Long Pin Header
1 x 433MHz Spring Antenna – IPEX
1 x SMA-KE Antenna Connector
Operating Voltage(V) |
3.3 |
---|---|
Emersion Current(mA) |
≤120 |
Receiving Current(mA) |
≤15 |
Sleep Current(uA) |
≤1 |
Transmission Mode |
FIFO/ DMA |
Modulation Type |
LoRaTM /FSK /GFSK /OOK |
Interface Type |
SPI |
Output Power(dBm) |
≤20 |
Operating Temperature Range (°C) |
-20 to 70 |
Length (mm) |
58 |
Width (mm) |
29 |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
Processor |
Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz H.265 (HEVC) (up to 4Kp60 decode) ,H.264 (up to 1080p60 decode ,1080p30 encode) OpenGL ES 3.0 graphics |
---|---|
Memory |
8GB LPDDR4-3200 SDRAM |
Storage |
Support boot from SD Card( Capacity can be chosen from 32GB~256GB) Support boot from SSD hard disk driver(Capacity can be chosen from 120GB~1TB |
Multimedia |
8-megapixel camera (Optional ) 2 channel 1W stereo speakers 1-channel MEMS microphone Support headphone jack and external microphone 1 standard HDMI 4K high-definition output interface 1 channel Micro HDMI 4K high-definition output interface |
Network and wireless |
1 channel 10/100/1000M Ethernet 2.4G/5.8G dual-band WiFi ,compatible with IEEE 802.11 b/g/n/ac Bluetooth BLE5.0 1 official Raspberry Pi external antenna 4G/LTE version optional (non-SSD hard disk version) |
Interface |
2 channels USB3.0 1 channel way USB2.0 |
Other |
One-click switch turns on/off the system with power & status LED indication RTC built-in with a backup battery |
Power Supply |
USB Type C interface ,5V/3A DC input |
Dimensions (L x W x H) mm |
100 x 100 x 19 |
Weight |
260g |
Software Environment |
Raspbian Desktop version pre-installed |
Out of stock
Industrial interface |
4 x RS485 1 x RS232 1 x CAN 1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x buzzer |
---|---|
Display |
1 x Standard HDMI port 1 x HDMI by FPC cable 1 x DSI interface+1 x 5V@1.5A output ,support Raspberry Pi official display |
Wired interface |
1 x 10/100M/1000 Ethernet 2 x USB2.0 (external) 1 x Micro USB2.0 (Inside the case ,for programming) |
Wireless communication |
1 x 4G/LTE module 1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE Official Raspberry Pi WiFi/BLE external antenna |
Storage |
1 x microSD card holder (used to expand user data storage) |
Expansion interface |
1 x Mini PCI-e socket for PCIe Gen2 x1 |
Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
Operating temperature: |
-25~60°C |
Dimension (L x W x H) |
103 x 73 x 32 |
Software Environment |
Raspberry Pi Raspbian OS installed Support removing software upgrade |
Out of stock
Out of stock
Out of stock
CPU |
Rockchip RK3328 |
---|---|
Number of Cores |
Quad-Core Cortex-A53 |
Frequency |
4 x Cortex-A53 Up to 1.3GHz |
DDR4 RAM |
1GB |
Network |
Internal 10/100/1000M Ethernet Port x 1 USB3.0 converted 10/100/1000M Ethernet Port x 1 |
USB Host |
USB 2.0 Host x1: USB Type A |
USB-C x1 |
Power input(5V/2A) and Slave |
Debug Serial Port/UART0 |
3.3V TTL ,3-pin 2.54mm pitch connector Buttons User button x 1 |
MicroSD Slot |
1 |
LED |
3 |
PCB Dimension |
55.6 x 52mm |
Power |
DC 5V/2A |
Working temperature |
0℃ to 80℃ |
Os Supports |
FriendlyWrt 21.02.1 (64-bit) ,FriendlyCore Focal Lite (Base on Ubuntu 20.04) |
Out of stock
Communication peripherals |
One 8-bit Serial Peripheral Interfaces (SPI) – Two I2C modules – One low-power UART |
---|---|
Analog peripherals |
12-bit SAR ADC w/ DMA support – High-speed comparator |
Processor |
32-bit ARM Cortex-M0+ core |
Memories |
32 KB flash ,4 KB SRAM |
Clocks |
4 MHz and 32 kHz internal reference clock |
Timers |
Two 2-channel Timer/PWM modules – Low-power Timer (LPT) – System tick timer |
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.