-
Fast ShippingGet the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹14,043.59 (Including tax)
Discount per Bulk Quantity
| Quantity | Discount | Price |
|---|---|---|
| 5 - 10 | 5% | ₹13,341.42 (Including tax) |
| 11 - 20 | 8% | ₹12,920.10 (Including tax) |
| 21 - 40 | 10% | ₹12,639.24 (Including tax) |
| 41 - 100 | 12% | ₹12,358.37 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
This full-scale oxygen sensor employs the original AO2 CiTiceL oxygen sensor probe and features a measurement range of 0-100%Vol and I2C digital output, which can be adapted to application scenarios including oxygen generators, automobile exhaust, and air-fuel ratio detection.
The DFRobot oxygen sensor has a built-in calibration algorithm on the signal board that can quickly perform single-point or double-point calibration so as to accurately measure the oxygen concentration in the environment. Based on the principle of electrochemistry, the sensor probe comes with strong anti-interference ability, high stability and sensitivity, and up to two years of service life. It is compatible with mainstream controllers such as Arduino, ESP32, Raspberry Pi, etc. Besides, the sensor is designed with an easy-to-use Gravity interface, and with our sample codes, you can quickly build an oxygen detector.
1 x DFRobot Gravity Electrochemical Oxygen Sensor (0-100%Vol) – I2C
| Detection Gas |
Oxygen concentration |
|---|---|
| Detection range |
0~100% |
| Working Pressure Range |
0.5~2.0Bar |
| Working Voltage |
3.3~5.5V DC |
| Output Signal |
I2C ,UART (0~3V) ,analog voltage |
| Lifespan |
>2 years (in air) |
| Working Humidity Range |
0-99% RH (non-condensing) |
| Working Temperature Range (°C) |
-20°C ~ +50°C |
| Product Dimensions |
32mm x 27mm/1.26 x 1.06 inch |
| Response Time ( μS) |
<5S |
| Mounting Holes Diameter (mm) |
inner diameter 3.1mm(0.12 inch)/outer diameter 6mm(0.24 inch) |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
| Particle Measurement Range |
0.3~1.0μm; 1.0~2.5μm; 2.5~10μm |
|---|---|
| Particle Counting Efficiency |
50%@0.3μm ,98%@>=0.5μm |
| Resolution of Particle Mass Concentration |
1μg/mᶟ |
| Temperature Measurement Range |
0~99℃ |
| Temperature Measurement Resolution |
0.1℃ |
| Humidity Measurement Range |
0~99% |
| Humidity Measurement Resolution |
0.1% |
| Humidity Measurement Accuracy |
±2% |
| Single Response Time |
<1s |
| Comprehensive Response Time |
≤10s |
| DC Supply Voltage |
Typ: 5V Min: 4.5V Max: 5.5V |
| Working Current |
≤100mA |
| Standby Current |
≤200mA |
| Data Interface Level |
L<0.8V ,H>2.7V ,maximum level voltage 3.3V |
| Working Temperature Range |
10~50℃ |
| Working Humidity Range |
0~99% |
| Storage Temperature Range |
40~80℃ |
Out of stock
| Detection Gas |
Hydrogen (H2) |
|---|---|
| Detection range |
0~1000ppm |
| Working Voltage |
3.3~5.5V DC |
| Working Current |
<5mA |
| Output Signal |
I2C ,UART (0~3V) ,analog voltage |
| Working Temperature |
-20~50℃ |
| Working Humidity |
15~90%RH (non-condensing) |
| Storage Temperature |
-20~50℃ |
| Communication Protocol |
I2C ,UART and analog |
| Compatibility |
Arduino ,ESP32 ,Raspberry pi |
| Storage Humidity |
15~90%RH (non-condensing) |
| Lifespan |
>2 years (in the air) |
| Adapter Plate Size |
37 x 32mm |
Out of stock
Out of stock
| Heater voltage |
5.0±0.2V DC |
|---|---|
| Circuit Voltage |
5.0±0.2V DC |
| Heater Current |
56±5mA |
| Minimum impedance between Pin#2,3 and GND |
2.5MΩ |
| Operating conditions |
0Ëš~40ËšC ,30~95%RH |
| Temperature differential between inside and outside detector casing |
≤10˚C max. (see NOTE 1) |
| Test gas conditions |
1250±100ppm iso-butane in air at 20˚±2˚C ,65±5%RH |
| Circuit conditions |
VH=5.0±0.05V DC VC=5.0±0.05V DC |
Out of stock
Out of stock
| Model No. |
TGS2602-B00 |
|---|---|
| Heater Voltage |
5.0±0.2V DC |
| Circuit Voltage |
5.0±0.2V DC |
| Heater power consumption |
280mW (typical) |
| Heater Current |
56±5mA |
| Sensing Principle |
MOS type |
| Heater Resistance |
approx 59Ω at room temp. (typical) |
| Load Resistance |
variable 0.45kΩ min |
| Sensor Resistance |
10kΩ ~ 100kΩ in air |
| Standard Package |
TO-5 metal can |
| Target Gases |
Air contaminants (VOCs ,ammonia ,H2S ,etc.) |
| Test Gas Conditions |
normal air at 20±2˚C ,65±5%RH |
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.