-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹19,335.89 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹18,369.09 (Including tax) |
11 - 20 | 8% | ₹17,789.02 (Including tax) |
21 - 40 | 10% | ₹17,402.30 (Including tax) |
41 - 100 | 12% | ₹17,015.59 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
As an upgraded version of this new generation, the Industrial Grade Analog ORP Sensor Meter PRO ORP probe employs a platinum indicator electrode and silver-silver chloride reference electrode, which makes it available for 24-hour online ORP monitoring and greatly enhances product durability. The new signal converter adds a more stable voltage reference so that the sensor readings would be no longer affected by supply voltage fluctuations. Besides, there are screws, copper columns, and waterproof connectors included in the accessory packet to help you conveniently build up an ORP monitoring system.
ORP(Oxidation-Reduction Potential) is a measure of the ability of oxidation and reduction of an aqueous solution, which is the relative degree of oxidizing or reduction. The unit is mV. If the oxidation-reduction potential is high then chemical oxidation is strong, while if the potential is lower then oxidation is weaker. The positive potential means that solution shows a certain degree of oxidation, while the negative potential means that solution shows a certain degree of reduction. ORP is an important index of water quality detection, although it can not separate water quality independently, it can be combined with other water quality indexes to reflect the ecological environment better.
1 x DFRobot Gravity Industrial Grade Analog ORP Sensor Meter PRO
Input signal |
0.5V ~ 4.5V |
---|---|
Working Voltage |
5V |
Measuring Range |
-2000mV ~ +2000mV |
Output Interface |
PH2.0 – 3Pin |
Interface |
5.08mm/0.20″ Pluggable Connector |
Product Dimensions |
42mm×32mm/1.65×1.26″ |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Particle Measurement Range |
0.3~1.0μm; 1.0~2.5μm; 2.5~10μm |
---|---|
Particle Counting Efficiency |
50%@0.3μm ,98%@>=0.5μm |
Resolution of Particle Mass Concentration |
1μg/mᶟ |
Temperature Measurement Range |
0~99℃ |
Temperature Measurement Resolution |
0.1℃ |
Humidity Measurement Range |
0~99% |
Humidity Measurement Resolution |
0.1% |
Humidity Measurement Accuracy |
±2% |
Single Response Time |
<1s |
Comprehensive Response Time |
≤10s |
DC Supply Voltage |
Typ: 5V Min: 4.5V Max: 5.5V |
Working Current |
≤100mA |
Standby Current |
≤200mA |
Data Interface Level |
L<0.8V ,H>2.7V ,maximum level voltage 3.3V |
Working Temperature Range |
10~50℃ |
Working Humidity Range |
0~99% |
Storage Temperature Range |
40~80℃ |
Out of stock
Out of stock
Gas Detection |
Carbon Dioxide (CO2) |
---|---|
Operating Voltage |
4.5 ~ 5.5V DC |
Average Current |
<85mA |
Output |
UART |
Measuring Range |
0 ~ 50000ppm |
Accuracy |
± (50ppm + 5% reading) |
Preheating Time |
3min |
Response Time |
T90 < 30s |
Operating Temperature |
0 ~ 50 ℃ |
Operating Humidity |
0 ~ 95% RH (no condensation) |
Service Life |
>5 years |
Out of stock
Out of stock
Model No. |
TGS5042-A00 |
---|---|
Target Gases |
Carbon monoxide |
Typical detection range |
0 ~ 10 ,000ppm |
Output current in CO |
1.2~2.4nA/ppm |
Baseline offset(*1) |
<±10ppm equivalent |
Operating & storage temperature (*2,*3) |
-5ËšC ~ +55ËšC |
Operating humidity |
5 ~ 99%RH (no condensation) |
Response time (T90) |
within 60 seconds |
Standard test conditions |
20±2˚C ,40±10%RH |
Out of stock
Model number |
TGS5141-P00 |
---|---|
Output current in CO |
1.2~3.2nA/ppm |
Target Gases |
Carbon monoxide |
Typical detection range |
0 ~ 5 ,000ppm |
Baseline offset(*1) |
<±10ppm equivalent |
Operating temperature |
10ËšC ~ +50ËšC (continuous) -20ËšC ~ +60ËšC (intermittent) |
Operating humidity |
10 ~ 95%RH (no condensation) |
Response time (T90) |
within 60 seconds |
Storage conditions |
-10ËšC ~ +50ËšC (continuous) -20ËšC ~ +60ËšC (intermittent |
Standard test conditions |
20±2˚C ,40±10%RH |
Weight |
approx. 2.5g |
Out of stock
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.