This is an  FFC / FPC Adapter Board 1mm to 2.54mm Soldered Connector – 6 pin. This is useful in terminating the displays and also for supporting board-to-board. The connector is a surface mount, which is ideal for applications where space is a factor.It is ideal for applications where space is a constrain and maneuverability is a necessity like automotive, communications, medical and consumer industries, etc.

Features:

1. High corrosion resistance.
2. Easy to use.

Package includes:

1 x FFC / FPC Adapter Board 1mm to 2.54mm Soldered Connector – 6 pin

The 36210-0100PL is a 10-way Wiremount Receptacle, 0.2µm minimum gold wiping area with gold flash tail and gold-plated copper alloy contacts. This 362 series receptacle is glass filled nylon insulated, vibration resistant, mates to all 3M™ Shielded Compact Ribbon (SCR) boardmount and wiremount plugs, accommodates up to 18AWG wire. 10 contacts can carry signal or power (up to 1A per pin), solder termination for quick assembly with no dedicated tooling.

Features:

1. Mates to all 3M™ Shielded Compact Ribbon (SCR) Boardmount and Wiremount Plugs
2. Polarized to provide proper insertion
3. Robust ribbon style contact for reliable, repetitive plugging
4. 10 contacts can carry signal or power (up to one ampere per pin)
5. Vibration resistant
6. Solder termination for quick assembly with no dedicated tooling
7. Accommodates up to 18 AWG wire
8. See Regulatory Information Appendix (RIA) for chemical compliance information

Specifications:

1. Current Rating: 1 A
2. Voltage Rating: 150 VAC / 200 VDC
3. Insulation Resistance: > 5 × 108Ω at @ 500 VDC
4. Withstanding Voltage: 500 VRMS for 1 minute

Packages Includes:

1 x 36210-0100PL-SC RIBBON CONNECTOR, RECEPTACL

Blade Terminal, 22AWG to 16AWG, Uninsulated, 2.3mm x 0.8mm

Features:

1. Easy to Use
2. Easy to Install
3. Good quality Product

Specifications:

1. Insulator Material: Uninsulated
2. Tab Size – Metric: 2.3mm x 0.8mm
3. Tab Size – Imperial: 0.091″ x 0.032″
4. Wire Size (AWG): 22AWG to 16AWG

Package Includes:

5 x 1.25-AF2.3A-TERMINAL, BLADE, 2.3MM X 0.8MM

WIRE-BOARD CONNECTOR RECEPTACLE, 8 POSITION, 2.54MM

Features:

1. Easy to install
2. Easy to use
3. Good quality Product

Specifications:

1. IDC Connector Type: IDC Receptacle
2. Contact Gender: Female
3. Pitch Spacing: 2.54mm
4. No. of Rows: 1 Row
5. No. of Contacts: 8Contacts
6. Connector Mounting: Cable Mount
7. Contact Material: Copper Alloy
8. Contact Plating: Tin Plated Contacts
9. Product Range: MTA-100 Series

Package Includes:

1 x 3-640620-8-WIRE-BOARD CONNECTOR RECEPTACL

The PA series wire-to-board Crimp-style Connector with a secure locking device. The housing has a locking device to prevent accidental disconnection because of routing wires or of vibration and also reverse and different circuit numbers mating. This series connector comes with top entry/side entry PC board mounting direction.

Features:

1. Interchangeable between crimp and IDC socket
2. Secondary retainers
3. Harness variation

Specifications:

1. Connector Systems: Wire-to-Board
2. Pitch Spacing: 2mm
3. No. of Rows: 1Rows
4. No. of Contacts: 4Contacts
5. Contact Termination Type: Through Hole
6. Product Range: PA
7. Connector Shroud: Shrouded
8. Contact Material: Copper
9. Contact Plating: Tin Plated Contacts

Package Includes:

1 x S04B-PASK-2 (LF)(SN)-HEADER, PA, 4WAY, SIDE, 2MM

The term 206061-2-RECEPTACLE, STD SLD CPC1, 4WAY is likely a product code or part number for a specific electrical connector. Here’s what each part of the code likely means:

206061-2: This is likely the specific part number for the connector.
RECEPTACLE: This likely refers to the type of connector. A receptacle is a type of connector that receives a plug or other male connector.
STD: This likely refers to the standard or specification that the connector meets. It may refer to a standard set by an organization like the International Electrotechnical Commission (IEC) or the Institute of Electrical and Electronics Engineers (IEEE).
SLD: This likely refers to the method of termination for the connector. SLD likely stands for “soldered” or “solder termination,” meaning that the connector is designed to be soldered onto a wire or PCB.
CPC1: This likely refers to the series or family of connectors that this specific connector belongs to. CPC may stand for “Circular Plastic Connector,” which is a type of connector used in many industries.
4WAY: This likely refers to the number of contacts or pins in the connector. 4WAY likely means that the connector has four pins or contacts.

Packages Includes:

1 x 206061-2-RECEPTACLE, STD SLD CPC1, 4WAY