NCV2904DR2G – 32V Single Supply Dual Operational Amplifier SOIC ON Semiconductor IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x NCV2904DR2G – 32V Single Supply Dual Operational Amplifier SOIC ON SemiconductorIC SMD-8 Package

The TL97x family of single, dual, and quad operational amplifiers operates at voltages as low as ±1.35 V and features output rail-to-rail signal swing. The TL97x boasts characteristics that make them particularly well suited for portable and battery-supplied equipment. Very low noise and low distortion characteristics make them ideal for audio preamplification.

 The TL971 is housed in the space-saving 5-pin SOT-23 package, which simplifies board design because of the ability to be placed anywhere (outside dimensions are 2.8 mm × 2.9 mm).

Applications:

1. Portable Equipment
2. Instrumentation and Sensors
3. Professional Audio Circuits

Features:

1. Overload protection on the input and output
2. No latch-up when the common-mode range is exceeded
3. Applications: Audio, Communications & Networking, Signal Processing

Package Includes:

1 x TL974IDR – Output Rail-to-Rail Very-Low-Noise Operational Amplifier 14-Pin SOIC (Texas Instruments)

MC33078 Dual High Speed Low Noise Op-Amp IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x MC33078 Dual High Speed Low Noise Op-AmpIC DIP-8 Package

The LM393 series are dual independent precision voltage comparators capable of single or split supply operation. These devices are designed to permit a common mode range−to−ground level with single supply operation. Input offset voltage specifications as low as 2.0 mV make this device an excellent selection for many applications in consumer, automotive, and industrial electronics.

Features:

1. Very Low Current Drain Independent of Supply Voltage: 0.4 mA
2. Input Common Mode Range to Ground Level
3. Differential Input Voltage Range Equal to Power Supply Voltage
4. Output Voltage Compatible with DTL, ECL, TTL, MOS, and CMOS
   Logic Levels
5. ESD Clamps on the Inputs Increase the Ruggedness of the Device
   without Affecting Performance
6. NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
7. These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
   Compliant

Specifications: 

1. Wide Single−Supply Range: 2.0 Vdc to 36 Vdc
2. Split−Supply Range: ±1.0 Vdc to ±18 Vdc
3. Low Input Bias Current: 25 nA
4. Low Input Offset Current: 5.0 nA
5. Low Input Offset Voltage: 5.0 mV (max) LM293/393
6. Wide Single−Supply Range: 2.0 Vdc to 36 Vdc
7. Split−Supply Range: ±1.0 Vdc to ±18 Vdc

Packages Includes:

1 x LM393 Low Power Low Offset Voltage Dual Comparator – SMD

SGM358YMS/TR – 1MHz 60uA Rail-to-Rail I/O CMOS Operational Amplifier IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x SGM358YMS/TR – 1MHz 60uA Rail-to-Rail I/O CMOS Operational AmplifierIC SMD-8 Package

LT1638CMS8#PBF 1.2MHz 0.4V/us Micropower Rail-to-Rail I/O Op Amp IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x LT1638CMS8#PBF 1.2MHz 0.4V/us Micropower Rail-to-Rail I/O Op Amp MSOP SMD-8 Package