ODROID-H3+ Single Board Computer
₹22,599.00
- Intel Pentium Quad-Core Jasper Lake N6005 @ 2GHz, up to 3.3GHz boost
- Up to 64 GB RAM, dual-channel DDR-PC4-23400 (2933 MT/s)
- Two SO-DIMM slots, up to 32GB per slot
- 2x 2.5Gbps Ethernet port
- 2 x SATA 3.0 ports
Did you like this product? Add to favorites now and follow the product.
+91-7231900002 Connect on Whatsapp
Description
The Odroid H3+ single-board computer is based on the quad-core Intel Pentium Jasper Lake N6005 processor clocked at 2 GHz (up to 3.3 GHz in boost mode) with 1.5 MB L2 cache and 4 MB L3 cache, created in 10 nm technology. It has two slots for DDR4-PC4-23400 SO-DIMM RAM and supports a capacity of up to 64 GB.
The board also features a PCIe 3.0 x 4 slot for an M.2 NVMe drive, 2 x 2.5Gbps Ethernet ports, SEE4.2 accelerator, HDMI 2.0 port, DisplayPort, and RTC/BIOS battery slot. Odroid H3+ is also equipped with a powerful graphics chip Intel UHD Graphics 23 EUs Turbo 900 MHz.
Board Details:
-
A. CPU (Intel Pentium Silver N6005)
-
B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)
-
C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
-
D. 1 x eMMC (Embedded Multimedia-Card) Socket
-
E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
-
F. 2 x SATA3 6.0 Gb/s Data Connectors
-
G. 1 x DC Power Jack
-
H. 2 x USB 3.0
-
I. 2 x USB 2.0
-
J. 1 x HDMI 2.0
-
K. 1 x DisplayPort 1.2
-
L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
-
M. 5 x System LED Indicators
-
N. 1 x Peripheral Expansion Header (24-pin)
-
O. 1 x Power Switch
-
P. 1 x Reset Switch
-
Q. 1 x Backup Battery Connector (2-pin)
-
R. 1 x Active Cooling Fan Connector (4-pin)
-
S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out
How to run the Odroid H3 minicomputer?
- Connect the included RTC / BIOS backup battery to the 2-pin connector, which maintains the BIOS settings and performs the RTC function.
- Install DDR4 RAM sticks up to 32GB per slot and up to 64GB total (not included).
- Connect additional peripherals such as a monitor, keyboard, and mouse. Odroid H3 does not support devices with PS2 port. Only USB or Bluetooth devices are supported.
- The display can be connected via USB or DisplayPort.
- In order to communicate with the Internet, a patch cord must be connected to the Ethernet port (10 / 100 / 1000 / 2500 Mb/s)
- Connect the 15V/4A power adapter to the 5.5/2.1mm DC jack port.
Features:
- Intel Pentium Quad-Core Jasper Lake N6005 @ 2GHz, up to 3.3GHz boost
- Up to 64 GB RAM, dual-channel DDR-PC4-23400 (2933 MT/s)
- Two SO-DIMM slots, up to 32GB per slot
- 2x 2.5Gbps Ethernet port
- 2 x SATA 3.0 ports
- SSE4.2 Accelerator (SMM, FPU, NX, NMX, SSE, SSE2, SSE3, SSE4.1, SSE4.2, AES)
- Intel UHD Graphics 24 EUs Turbo 900MHz
- HDMI 2.0 and DP 1.2 video output
- Configurable Unlimited Performance mode allowing the processor to enter turbo boost mode
- RTC/BIOS backup battery included
Package Includes:
1 x ODROID-H3+ Single Board Computer
Additional information
Processor | Intel Celeron N6005 Processor (10nm, Quad-Core, TDP 10W) H3+(N6005) : up to 3.3Ghz 4MB L2 Cache Intel UHD Graphics (24/32 EU up to 900MHz) |
---|---|
Networking | 2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps) Realtek RTL8125B Supports Wake-On-Lan LED indicators (Green: Link, Amber: Traffic |
Memory | 2 x DDR4 1.2V SO-DIMM slots Dual Channel, up to 2933 MT/s (DDR4-PC23400) Max memory capacity 64GB DDR3/DDR5 are not supported |
Storage | 1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at the Hardkernel store 2 x SATA3 6Gbps ( SATA Port-Multiplier is NOT compatible ) 1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported |
Video | 1 x DisplayPort 1.2 (up to 4K@60Hz) 1 x HDMI 2.0 (up to 4K@60Hz) Dual simultaneous display support |
Audio | 1 x Audio out (3.5mm jack) 1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC1200, HDA codec) * HDMI & DP have audio output too. |
External I/O | 2 x USB 3.0 Host ports 2 x USB 2.0 Host ports 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) – 1 x DC 5V, 1 x DC 3.3V, 5 x GND – 1 x UART (TXD/RXD/RTS/CTS) – 2 x I2C (SCL/SDA) – 1 x External Power Button – HDMI CEC, 5VA+ – 3 x USB 2.0 – All 3.3V I/O signal level |
Other features | Passive Heatsink BIOS Backup Battery – Maintains system time and BIOS settings Power Button Reset Button System LEDS Indicators: – Red (PWR) – Solid light when DC power is supplied – Blue (left, SLEEP) – turns off only when the system enters into suspend mode – Blue (right, PMIC) – turns on only when the major power rails are working – Amber (SATA) – Flashes when SATA data transfers – Green (NVMe) – Flashes when NVMe data transfers Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output) – Active Cooling Fan is optional – Connector (4-pin, 2.54mm pitch) |
Power | DC jack : outer (ground) diameter 5.5mm, inner(positive) diameter 2.1mm DC 14V ~ 20V (up to 60W) – DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs – DC 19V/7A power adapter is recommended if you two 3.5” HDDs together Power consumption: – IDLE : ≃1..9W – CPU Stress : ≃15W – CPU+GPU Stress : ≃18W – Power-off : ≃0.25W – Suspend : ≃0.6W |
Form Factor | 110mm x 110mm x 47mm Approx. |