Ready to Sky Digital Servo Tester/ESC Consistency Tester

SKU: 1010953
Out of stock

359.00

Add to Wishlist
Add to Wishlist
  1. Input voltage: 4.8-6.0v
  2. Screen Display 1.18inch
  3. Easy to Read 4 Digit 7 segment Screen
  4. Synchronous output servo system and performance for steering gear for precise control of servo control output signal
  5. Turn on the transmitter and set throttle stick to maximum (full up).
  6. Connect the LiPo battery.
  7. You will hear a musical tone then two beeps.
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

Readytosky Digital Servo Tester/ ESC  Consistency Tester is used to spin up your motors to check spin direction without having to use a receiver. It offers 3 modes to check servos or ESC.

The Display is consists of a 7 segment display and also it has an input port and output port. low-power, cost-effective device which can examine three servo motors at a time. The tester requires a maximum of 6 volts for normal functioning. It also has an electric speed controller (ESC), which is used to check the motor’s current directions A little bigger than a postage stamp, the Simple Servo Tester lets you control two digital or analog servos without using a transmitter or receiver, just plug in your battery pack to start testing. Use it to check your servos before installing them into your models or to center your servos when setting up linkages


Features:

  1. Input voltage: 4.8-6.0v
  2. Screen Display 1.18inch
  3. Easy to Read 4 Digit 7 segment Screen
  4. Synchronous output servo system and performance for steering gear for precise control of servo control output signal
  5. 7 servos can be output and controlled synchronously
  6. Plug one of your ESC three-wire cables into the throttle channel of the RC receiver. …
  7. Turn on the transmitter and set throttle stick to maximum (full up).
  8. Connect the LiPo battery.
  9. You will hear a musical tone then two beeps.
  10. After the two beeps, lower the throttle stick to full down

Packages Includes:

1 x Ready to Sky Digital Servo Tester/ESC Consistency Tester

Additional information

Display Type

4 Digit 7 Segment Display

Material

PVC

Color

Black

Output Voltage(V)

4.8V

Dimensions

9 x 8 x 3

Weight

30g

Quick Comparison

SettingsReady to Sky Digital Servo Tester/ESC Consistency Tester removeBoat Steering Car Servo Alloy Aluminum 28.5mm 25T Teeth Half Arm Horn removeAluminum 25T Servo Horn Steering Arm removeDigital Servo Tester / ESC Consistency Tester remove
NameReady to Sky Digital Servo Tester/ESC Consistency Tester removeBoat Steering Car Servo Alloy Aluminum 28.5mm 25T Teeth Half Arm Horn removeAluminum 25T Servo Horn Steering Arm removeDigital Servo Tester / ESC Consistency Tester remove
Image
SKU101095311191841119183974850
Rating
Price359.0089.00175.00369.00
Stock
Out of stock
Out of stock
In Stock
In Stock
AvailabilityOut of stockOut of stockIn StockIn Stock
Add to cart

Read more

Read more

Add to cart

Add to cart

Description
  1. Input voltage: 4.8-6.0v
  2. Screen Display 1.18inch
  3. Easy to Read 4 Digit 7 segment Screen
  4. Synchronous output servo system and performance for steering gear for precise control of servo control output signal
  5. Turn on the transmitter and set throttle stick to maximum (full up).
  6. Connect the LiPo battery.
  7. You will hear a musical tone then two beeps.
  1. Gear Teeth: 25T
  2. Material: Aluminum
  3. Overall length: 28.5mm
  4. Thickness: 2.5mm
  1. Gear Teeth: 25T
  2. Material: Aluminum
  3. Overall length: 28mm
  4. Thickness: 2.80mm
  1. 1.18” Inch Display
  2. Color: Black
  3. Material: PVC
  4. Display:4 Digit 7 Segment Display
  5. Dimensions : 70x34x13 (LxWxH) mm
  6. Weight: 28gm
Content

Readytosky Digital Servo Tester/ ESC  Consistency Tester is used to spin up your motors to check spin direction without having to use a receiver. It offers 3 modes to check servos or ESC.

The Display is consists of a 7 segment display and also it has an input port and output port. low-power, cost-effective device which can examine three servo motors at a time. The tester requires a maximum of 6 volts for normal functioning. It also has an electric speed controller (ESC), which is used to check the motor’s current directions A little bigger than a postage stamp, the Simple Servo Tester lets you control two digital or analog servos without using a transmitter or receiver, just plug in your battery pack to start testing. Use it to check your servos before installing them into your models or to center your servos when setting up linkages


Features:

  1. Input voltage: 4.8-6.0v
  2. Screen Display 1.18inch
  3. Easy to Read 4 Digit 7 segment Screen
  4. Synchronous output servo system and performance for steering gear for precise control of servo control output signal
  5. 7 servos can be output and controlled synchronously
  6. Plug one of your ESC three-wire cables into the throttle channel of the RC receiver. …
  7. Turn on the transmitter and set throttle stick to maximum (full up).
  8. Connect the LiPo battery.
  9. You will hear a musical tone then two beeps.
  10. After the two beeps, lower the throttle stick to full down

Packages Includes:

1 x Ready to Sky Digital Servo Tester/ESC Consistency Tester

This is high-quality Servo Horn/Arm compatible with our MG995 Servo Motor. This CNC Aluminum Steering Servo Horn Arm for Futaba Standard 25T has very nice looking shiny red color.

It has an aluminum body and is perfect for the servos with 25 teeth.

Note: This product is available in four colors as Red, Black, Blue, and Silver. It will be shipped randomly to our customers.

Package Includes :

1 x Boat Steering Car Servo

This is a high-quality Servo Horn/Arm compatible with our MG995 Servo Motor. This CNC Aluminum Steering Servo Horn Arm for Futaba Standard 25T is very nice looking with edge cut design. It has an aluminum body and is perfect for servos with 25 teeth shaft

Note: This product is available in four colors Red, Black, Blue, and Silver. It will be shipped randomly according to the availability.

Package Includes :

1 x Aluminum 25T Servo Horn Steering Arm

The Digital Servo Tester/ ESC  Consistency Tester offers 3 modes to check servos or ESC. The addition of the Servo Tester is really useful for drone builders, you can use it to spin up your motors to check spin direction without having to use a receiver. For those into planes, you can use it to check servo throws and set the neutral point.

It consists of a 7 Segment Display and also it consists of an input port and an Output Port. The output voltage is about 4.8 to 6.0 V.


Features:

  1. 1.18” Screen Display
  2. Easy to Read 4 Digit 7 segment Screen
  3. 7 servos can be output and controlled synchronously
  4.  An adjustable rotary potentiometer can reduce or increase the width of the output pulse.

Package Includes:

1 x Digital Servo Tester / ESC Consistency Tester

Weight
DimensionsN/AN/AN/AN/A
Additional information
Display Type

4 Digit 7 Segment Display

Material

PVC

Color

Black

Output Voltage(V)

4.8V

Dimensions

9 x 8 x 3

Weight

30g

Display Type

4 Digit 7 Segment Display

Material

PVC

Colour

Black

Output Voltage(V)

4.8-6

Product Weight(LxWxH)

7X3.4X1.3

Display Dimension(Inch)

1.18''