Sipeed M0sense with LCD

SKU: 1488399
In Stock

849.00

  1. Main-chip BL702: 32 bits RISC-V with FPU (Max Freq 144MHz)
  2. Memory: 132KB RAM,192KB ROM, 512KB Flash
  3. Main-chip BL702: USB 2.0 FS route to USB Type-C to burn firmware
  4. Supply Voltage: 5V±10% 0.5A
  5. Eight DMA channels
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

Sipeed M0sense is an  a IOT development board based on BL702 of Bouffalo Lab, it’s RISC-V architecture, and supports low-energy Bluetooth. There is an 8Pins FPC connector for connecting the LCD screen, 1 microphone, 1 RGB LED and a six-axis sensor chip on this board. One USB 2.0 FS routes to the Type-C interface.

Applications:

  1. Smart appliances
  2. robot
  3. Intelligent Vehicle engine
  4. Intelligent access control
  5. Interlligent agriculture
  6. Passenger flow sraristics
  7. retail
  8. Handwritten Numeral Recognition

Features:

  1. Powerful chip support: Main chip BL702 RISC-V 144MHz
  2. Supporting edge machine learning: Developing Edge Computing and Machine Learning Capabilities with the TinyMaix Inference Framework
  3. Provide human-computer interaction: Onboard screen interface (Optional 0.68 inch 80×160 solution screen)
  4. Mass storage device: Thumb size but with 132KB RAM, 192KB ROM, 512KB Flash capacity
  5. Bluetooth wireless transmission: Support BlueTooth V5.

Specifications:

  1. Main-chip BL702: 32 bits RISC-V with FPU (Max Freq 144MHz)
  2. Memory: 132KB RAM,192KB ROM, 512KB Flash
  3. Main-chip BL702: USB 2.0 FS route to USB Type-C to burn firmware

Main-chip BL702:

  1. Two 32-bit timer
  2. Eight DMA channels
  3. One SPI
  4. Two UART
  5. One I2C interface
  6. One I2S
  7. Five PWM
  8. One 12-bit ADC
  9. One 10-bit DAC

Wireless:

  1. 2.4Ghz BlueTooth V5.0
  2. 1Mbps and 2Mbps BLE

Packages Includes:

1 x Sipeed M0sense with LCD

Quick Comparison

SettingsSipeed M0sense with LCD removeSipeed M1s Dock AI with 1.69 Inch CTP Development board removeEDATEC ED-CM4SEN baseboard with WIFI Antenna 4G Module Metal Case 1GB RAM and 8GB EMMC removeEDATEC CM4NANO baseboard withCM4108008 WIFI antenna, metal case 8GB RAM and 8GB EMMC removeAdafruit FeatherS2 – ESP32-S2 Feather Development Board removeSTMICROELECTRONICS  B-L462E-CELL1  IoT Discovery Kit, STM32L462REY6TR, 32bit ARM Cortex-M4 Microcontroller remove
NameSipeed M0sense with LCD removeSipeed M1s Dock AI with 1.69 Inch CTP Development board removeEDATEC ED-CM4SEN baseboard with WIFI Antenna 4G Module Metal Case 1GB RAM and 8GB EMMC removeEDATEC CM4NANO baseboard withCM4108008 WIFI antenna, metal case 8GB RAM and 8GB EMMC removeAdafruit FeatherS2 – ESP32-S2 Feather Development Board removeSTMICROELECTRONICS  B-L462E-CELL1  IoT Discovery Kit, STM32L462REY6TR, 32bit ARM Cortex-M4 Microcontroller remove
Image
SKU148839914884011443752144375113831991485709
Rating
Price849.002,759.0018,999.0018,999.003,649.008,699.00
Stock
In Stock
In Stock
Out of stock
Out of stock
In Stock
In Stock
AvailabilityIn StockIn StockOut of stockOut of stockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Read more

Read more

Add to cart

Add to cart

Description
  1. Main-chip BL702: 32 bits RISC-V with FPU (Max Freq 144MHz)
  2. Memory: 132KB RAM,192KB ROM, 512KB Flash
  3. Main-chip BL702: USB 2.0 FS route to USB Type-C to burn firmware
  4. Supply Voltage: 5V±10% 0.5A
  5. Eight DMA channels
  1. CPU: RV64GCV 480MHz, RV32GCP 320MHz, RV32EMC 160MHz
  2. NPU: BLAI-100
  3. Capacity: 768KB SRAM + 64MB UHS PSRAM
  4. Encode and Decode: MJPEG and H264(Baseline/Main), 1920×1080@30fps + 640×480@30fps
  5. Camera interface: DVP and MIPI-CSI
  • Broadcom BCM2711 4-core Cortex A72 1.5GHz (ARM v8) 64-bit CPU
  • Support H.265 (HEVC) (up to 4Kp60 decoding), H.264 (up to 1080p60 decoding, 1080p30 encoding)
  • OpenGL ES 3.0 graphics
  • RAM: 1GB LPDDR4-3200 SDRAM
  • eMMC: 8GB

 

 

  1. Model: ED-CM4NANO10-0408-C
  2. Broadcom BCM2711 4-core Cortex A72 1.5GHz (ARM v8) 64-bit CPU
  3. Support H.265 (HEVC) (up to 4Kp60 decoding), H.264 (up to 1080p60 decoding, 1080p30 encoding)
  4. OpenGL ES 3.0 graphics
  5. RAM: 8GB LPDDR4-3200 SDRAM
  6. eMMC: 8GB eMMC

 

 

 

  1. Model: Adafruit FeatherS2 – ESP32-S2
  2. 32-bit 240 MHz single-core processor
  3. 16 MB SPI Flash
  4. 8 MB extra PSRAM
  5. 2.4 GHz Wi-Fi – 802.11b/g/n
  1. Model: STMICROELECTRONICS  B-L462E-CELL1  IoT Discovery Kit, STM32L462REY6TR
  2. Product: IoT Discovery Kit
  3. EEPROM: I2C 16 Kbytes of
  4. Display: 0.96-inch 128 x 64 OLED screen with SPI interface
  5. Chip: Arm Cortex-M4 core
Content

Sipeed M0sense is an  a IOT development board based on BL702 of Bouffalo Lab, it’s RISC-V architecture, and supports low-energy Bluetooth. There is an 8Pins FPC connector for connecting the LCD screen, 1 microphone, 1 RGB LED and a six-axis sensor chip on this board. One USB 2.0 FS routes to the Type-C interface.

Applications:

  1. Smart appliances
  2. robot
  3. Intelligent Vehicle engine
  4. Intelligent access control
  5. Interlligent agriculture
  6. Passenger flow sraristics
  7. retail
  8. Handwritten Numeral Recognition

Features:

  1. Powerful chip support: Main chip BL702 RISC-V 144MHz
  2. Supporting edge machine learning: Developing Edge Computing and Machine Learning Capabilities with the TinyMaix Inference Framework
  3. Provide human-computer interaction: Onboard screen interface (Optional 0.68 inch 80×160 solution screen)
  4. Mass storage device: Thumb size but with 132KB RAM, 192KB ROM, 512KB Flash capacity
  5. Bluetooth wireless transmission: Support BlueTooth V5.

Specifications:

  1. Main-chip BL702: 32 bits RISC-V with FPU (Max Freq 144MHz)
  2. Memory: 132KB RAM,192KB ROM, 512KB Flash
  3. Main-chip BL702: USB 2.0 FS route to USB Type-C to burn firmware

Main-chip BL702:

  1. Two 32-bit timer
  2. Eight DMA channels
  3. One SPI
  4. Two UART
  5. One I2C interface
  6. One I2S
  7. Five PWM
  8. One 12-bit ADC
  9. One 10-bit DAC

Wireless:

  1. 2.4Ghz BlueTooth V5.0
  2. 1Mbps and 2Mbps BLE

Packages Includes:

1 x Sipeed M0sense with LCD

Sipeed M1s Dock is a development board designed based on Sipeed BL808 M1s Module, routes interface like MIPI CSI、SPI LCD and FPC connector, to get rid of worries of connecting cable. Designed with the most minimal design, for customers to evaluate the module, or hobbyists to play directly, etc.

Sipeed M1s Dock is a powerful core board with a screen and uses the BL808 RISC-V as the CPU, and the powerful tri-core heterogeneous architecture can play a role in high-performance computing power.

BL808 mainly includes two subsystems, wireless and multimedia. The wireless subsystem includes a RISC-V 32-bit high-performance CPU, integrated Wi-Fi /BT/BLE wireless subsystem, which can provide a variety of connection and transmission experiences. The multimedia subsystem includes a RISC-V 64-bit ultra-high-performance CPU and integrates video processing modules such as DVP/CSI/ H264/NPU, which can be widely used in various AI fields such as video surveillance/smart speakers. As well as the BLAI-100 (Bouffalo Lab AI engine) NPU for video/audio detection and/or recognition.

It supports 2.4G WIFI/BT/BLE. You can choose different networking methods according to your needs to achieve different functions. At the same time, the M1s Dock comes with a USB to UART debugger, so you can easily burn code to the board with just one click. And then It has more rich features that are equipped with a base of the screen and base of the MIPI camera, as well as onboard an analog microphone, an LED and a TF card slot. For example, you will have a richer experience when choosing a 1.69-inch 240×280 capacitive touch screen and 200W pixel camera.

One advantage of the BL808 is that it can support Linux, and the microcontroller does include an MMU, so you would not have to deal with the usual uClinux headaches.

Applications :

  1. Artificial intelligence application
  2. Face recognition
  3. Posture recognition
  4. Gesture recognition
  5. Video surveillance

Features:

  1. Stronger-performance CPU: main chip BL808 RISC-V + NPU BLAI-100, the highest operating frequency of 480MHz to achieve powerful performance of three-core heterogeneous.
  2. Wireless three-mode integration: Support 2.4G WIFI / BT / BLE, any mode can efficiently be networked.
  3. One-click easy Burning: Sipeed M1s Dock has an onboard USB-to-UART debugger, which can realize one-click burning without pressing physical buttons.
  4. Friendly visualization features: The onboard display interface (optional 1.69-inch 240×280 capacitive touch screen) and the MIPI camera
  5. interface(optional 200W pixel camera) provide a stronger visual experience.
  6. High port compatibility: Route USB-OTG to USB Type-C port.

Specifications:

  1. CPU: RV64GCV 480MHz, RV32GCP 320MHz, RV32EMC 160MHz
  2. NPU: BLAI-100
  3. Capacity: 768KB SRAM + 64MB UHS PSRAM
  4. Encode and Decode: MJPEG and H264(Baseline/Main), 1920×1080@30fps + 640×480@30fps
  5. Camera interface: DVP and MIPI-CSI
  6. Display interface: SPI、DBI、DPI(RGB)
  7. Wireless: Wi-Fi 802.11 b/g/n, Bluetooth 5.x Dual-mode(BT+BLE), Wi-Fi / BT co-existence
  8. Port Basic Parameters: USB 2.0 HS OTG/TYPE-C
  9. Onboard components: USB to UART debugger, 1.69-inch 240×280 capacitor touch screen, 2M solution camera, 1 analog microphone、1 LED、1 TF card slot
  10. TYPE-C interface: 5V±10% 0.5A
  11. Temperature rise: <30K
  12. Operating temperature: -10℃ ~ 65℃.

Packages Includes:

  1. 1 x M1s Dock
  2. 1 x TYPE-C Cable
  3. 1 x Pin Header
ED-CM4SEN is an industrial computer designed for IoT & Data Acquisition applications based on Raspberry Pi Compute Module 4 (CM4 for short). It makes full use of the structural flexibility of CM4 to solve the heat dissipation problem of the CPU, wireless module, and PMU. The external antenna improves the reliability of wireless communication.
For application scenarios that require large data storage capacity, the user can use eMMC to install the operating system and store the application data, at the same time, the user can use an SD card to store large user data, compared to the built-in eMMC memory, SD card can offer larger capacity and its cost is more effective.

Features:

  • ED- CM4SEN provides 4G/LTE module, 4 channels RS485,1 channel RS232, 1 channel CAN, 1 channel Gigabit Ethernet port, alarm buzzer, battery-powered real-time clock
  • The DSI interface of ED-CM4SEN is fully compatible with Raspberry Pi4 Model B and supports Raspberry Pi’s official 7″ touch display. A 5V/1.5A power output provides the power for Pi Display, the Standard HDMI interface can output 4K HD video.
  • ED-CM4SEN provides 2 channels USB2.0 and 1 channel Micro USB2.0 interfaces, and a Micro USB interface is used to update the system image.
  • The system supports +12V~18VDC power input, and the dimension of ED-CM4SEN is 103*73*32mm, which is slightly larger than Pi4 Model B. The connectors come out from the front and back end and a 103*73mm*5mm heat sink provide excellent cooling performance for the CPU, wireless module, and PMU, the whole system can work reliably in a high-temperature environment.
  • Based on our real testing in the lab, ED-CM4SEN can work reliably at an ambient temperature of -25~60°C.
  • Four M2.5 screw holes are reserved at the case bottom of the ED-CM4SEN, which is convenient for users to install the ED-CM4SEN on other equipment, it also supports DIN rail mounting.

Package Includes:

1 x EDATec ED-CM4SEN baseboard with WIFI Antenna 4G Module Metal Case 1GB RAM and 8GB EMMC

 

 

CM4 NANO is a computer based on Raspberry Pi Compute Module 4, which offers the same functionality as Standard Raspberry Pi 4, but the design considered an additional low-cost high-density storage solution besides EMCC, wider operating temperature, better wireless performance & non-volatile Real Time Clock.

 

  • ED-CM4NANO is an embedded computer designed for industrial applications based on Raspberry Pi Compute Module 4 (CM4 for short). It makes full use of the structural flexibility of CM4 to solve the heat dissipation problem of the CPU, wireless module, and PMU. The BT antenna improves the reliability of wireless communication and provides flexible expansion capabilities.
  • The system can be configured into 1GB/2GB/4GB/8GB RAM and 8GB/16GB/32GB eMMC, 2.4/5.8G dual-band WiFi, and Bluetooth (optional) according to different applications, and it supports an external antenna.
    For application scenarios that require large data storage capacity, the user can use eMMC to install the operating system and store the application data, at the same time, the user can use an SD card to store large user data, compared to the built-in eMMC memory, SD card can offer larger capacity and its cost is more effective.
  • ED-CM4NANO provides an alarm buzzer, a battery-powered real-time clock, and supports a Gigabit Ethernet port with POE function, which is compatible with the official Raspberry Pi PoE HAT.
  • The CSI and DSI interfaces of ED-CM4NANO are fully compatible with Raspberry Pi4 Model B. CSI supports Raspberry Pi official 8M and 12M Pixel HQ cameras, and DSI interface supports Raspberry Pi official 7″ touch display. The Standard HDMI interface can output 4K HD video.
  • ED-CM4NANO provides 2 channels USB3.0 and 1-channel USB2.0 interfaces, and the USB2.0 interface can be used to update the system image.
  • ED-CM4NANO provides very strong expansion capabilities, supports a standard Raspberry Pi 40-pin expansion interface, and the user can mechanical-easily expand high-speed equipment through an onboard USB 3.0 Type C interface.
  • The system supports +12V~18VDC power input, and the 40PIN socket provides 5V@2A and 3.3V@1.5A output power and supports high-power expansion modules.
  • The dimension of ED-CM4NANO PCB is 95*58mm, which is slightly larger than Pi4 Model B. The connectors come out from the front and back end, a 103*62mm*5mm heat sink provides excellent cooling performance for the CPU, wireless module, and PMU, and the whole system can work reliably in a high-temperature environment.
  • Based on our real testing in the lab, ED-CM4NANO can work reliably at an ambient temperature of -25~60°C.
    Four M2.5 screw holes are reserved at the case bottom of the ED-CM4NANO, which is convenient for users to install the ED-CM4NANO on other equipment. ED-CM4NANO also supports DIN rail mounting.

Features:

  1. Broadcom BCM2711 4-core Cortex A72 1.5GHz (ARM v8) 64-bit CPU
  2. Support H.265 (HEVC) (up to 4Kp60 decoding), H.264 (up to 1080p60 decoding, 1080p30 encoding)
  3. OpenGL ES 3.0 graphics
  4.  RAM: 8GB LPDDR4-3200 SDRAM
  5. eMMC: 8GB

Package Includes:

1 x EDATec ED-CM4NANO10-0408-C baseboard WIFI Antenna Metal Case 8GB RAM and 8GB EMMC

 

 

 

Introducing the FeatherS2 – The full-featured ESP32-S2 based development board in a Feather format from Unexpected Maker. The FeatherS2 is a power house, fully souped up with 16 MB of Flash memory (for firmware and file storage) and8 MB of QSPI-based external PSRAM so you can have massive storage buffers.

This Feather comes with two 3.3V regulators: The first one is for the general operation of the board and the ESP32-S2, RAM and Flash. The second LDO is for you to use to connect external 3V3 modules, sensors and peripherals, and it has programmable EN control tied to GPIO21 and it’s connected to the deep sleep capabilities of the S2, so if the S2 goes into deep sleep, the 2nd LDO is automatically shut down for you! Both regulators are ultra low noise and have ultra low quiescent current, and both support a maximum of 700mA output.


Features:

  1. QWIIC/STEMMA connector
  2. Feather format
  3. Optimized power path for low-power battery usage
  4. LiPo battery management
  5. Power (red), Charge (orange) & IO13 (blue) LEDs
  6. APA102 RGB LED (CLK IO45, DATA IO40)
  7. ALS-PT19 Ambient Light Sensor (IO14)
  8. USB-C
  9. USB back feed protection

Package Includes:

1 x Adafruit FeatherS2 – ESP32-S2 Feather Development Board

The B-L462E-CELL1 Discovery kit is a turnkey development platform for cellular IoT devices. The Discovery kit contains a low-power Discovery main board powered by an LBAD0ZZ1SE module, a global coverage antenna, and a fan-out board. The LBAD0ZZ1SE module includes an STM32L462REY6TR microcontroller, an LBAD0XX1SC-DM ultra-small LTE Cat M/NB modem, and an ST4SIM GSMA-certified embedded SIM.
STMod+ and extended pins connectivity provide unlimited expansion capabilities with a large choice of specialized add-on boards. Moreover, the fan-out board supports add-on boards using mikroBUS, ESP01, Grove I2C, Grove UART, and breadboard. The B-L462E-CELL1 Discovery kit includes an ST-LINK debugger/ programmer and comes with the comprehensive STM32Cube software libraries together with packaged software
examples to seamlessly connect to cloud servers.

Note:

  1. For more info refer to datasheet.
  2. Image may vary from actual product in terms of design, and color.

Features:

  1. low power consumption
  2. Easy to use
  3. Compact design
  4. Best for your DIY IoT projects
  5. Low-power Audio CODEC with PCM bus and I2C interface
  6. Ultra-low-power 3D accelerometer and 3D magnetometer (LSM303AGR)
  7. Capacitive digital sensor for relative humidity and temperature (HTS221)

Specifications:

  1. Model: STMICROELECTRONICS  B-L462E-CELL1  IoT Discovery Kit, STM32L462REY6TR
  2. Product: IoT Discovery Kit
  3. EEPROM: I2C 16 Kbytes of
  4. Display: 0.96-inch 128 x 64 OLED screen with SPI interface
  5. Chip: Arm Cortex-M4 core
  6. Flash memory: 512 Kbytes of Flash memory and 160 Kbytes of RAM in a WLCSP64 package
  7. Quad-SPI Flash memory: Onboard 64 Mbytes, exclusive with the 1 MByte of Quad-SPI Flash memory inside the module
  8. Communications protocols: I2C, and UART
  9. Programmer: On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration
  10. Capability: mass storage, Virtual COM port, and debug port

Packages Includes:

1 x STMICROELECTRONICS  B-L462E-CELL1  IoT Discovery Kit, STM32L462REY6TR, 32bit ARM Cortex-M4 Microcontroller

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Industrial interface

4 x RS485 1 x RS232 1 x CAN 1 x RTC with a backup battery 1 x Red LED power indicator, 1 x Green LED status indication 1 x buzzer

Display

1 x Standard HDMI port 1 x HDMI by FPC cable 1 x DSI interface+1 x 5V@1.5A output, support Raspberry Pi official display

Wired interface

1 x 10/100M/1000 Ethernet 2 x USB2.0 (external) 1 x Micro USB2.0 (Inside the case, for programming)

Wireless communication

1 x 4G/LTE module 1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE Official Raspberry Pi WiFi/BLE external antenna

Storage

1 x microSD card holder (used to expand user data storage)

Expansion interface

1 x Mini PCI-e socket for PCIe Gen2 x1

Power supply

12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional

Operating temperature:

-25~60°C

Dimension (L x W x H)

103 x 73 x 32

Software Environment

Raspberry Pi Raspbian OS installed Support removing software upgrade

Model

ED-CM4NANO10-0408-C

Power supply

12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional

Camera and display

1 x CSI interface, support Raspberry Pi official 5M & 8M pixel camera module 1 x HDMI port 1 x DSI interface, support Raspberry Pi official display

Wired interface

1 x Support PoE power supply 10/100M/1000 Ethernet (requires official PoE HAT) 2 x USB3.0 (external) 1 x USB3.0 (built-in) 1 x USB2.0

Wireless communication

1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE WiFi/BLE external antenna and PCB antenna are optional

Storage

1 x microSD card holder (used to expand user data storage) Extensible interface: 1 x Raspberry Pi standard 40-pin connector 1 x Raspberry Pi standard 4-pin POE connector

Operating temperature

-25~60°C

Software Environment

Raspberry Pi Raspbian OS installed

Dimension (L x W x H) mm

103 x 62 x 21.5

Others

1 x RTC with a backup battery 1 x Red LED power indicator, 1 x Green LED status indication 1 x system reset button 1 x buzzer

SPI Flash

16 MB

Processor

32-bit 240 MHz single-core

Antenna Type

3D

Voltage Regulator

2x 700 mA 3.3 V LDO

PSRAM

8 MB