This is a TTGO OV2640 1.3 Inch T-Camera Plus Fish-eye Lens Rear Camera Module without MPU6050. The lens is used to transfer the image and data transmission. The module has a strong driving ability, strong anti-interference, low calorific value, and is more stable and reliable for Arduino projects. This module can be applied to Arduino Robot, Household Power Systems, raspberry pie, and DIY Servo Shield Module, etc.

Features:

1. The camera can be extended to become a rear camera.
2. this module can transfer images and data together.

Package Includes:

1 x TTGO OV2640 1.3 Inch T-Camera Plus Fish-eye Lens Rear Camera Module without MPU6050.

Features:

1. Object distance: 30cm
2. Resolution: 600LW/PH (Center)
3. Interface: USB 2.0

Package Includes:

1 x EMBEST Daughter Card, Digital Camera Module, 5MP USB Camera, 2592×1944 Resolution, Automatic Focus

Raspberry Pi Camera Module, adjustable-focus.After the Bullseye version of the Raspberry Pi image, the underlying Raspberry Pi driver was switched from Raspicam to libcamera. libcamera is an open-source software stack (will be called driver later, which is easy to understand), which is convenient for third-party porting and development of their own camera drivers. As of 2021-12-20, there are still many bugs in libcamera, and the current libcamera does not support python, so the Raspberry Pi official still provides a method for installing and downloading Raspicam. For users who are difficult to switch to libcamera but need to use the latest system, please directly refer to the Raspicam instructions.

Features:

1. Raspberry Pi Camera
2. Supports connecting fill flash LED
3. supports all revisions of the Pi
4. Fisheye Lens, offers wider field of view
5. 5 megapixel OV5647 sensor
6. Adjustable focus distance

Package Include:

1 X RPi Camera (M)

1 X 15-pin FFC (opposite sides contact)

IMX462-127 IR-CUT Camera, Starlight Camera Sensor, Onboard ISP, Fixed-Focus, 2MP.Onboard 1/2.8 inch Sony starlight camera sensor, IMX462 2MP Starlight Camera adopts back-illuminated pixel technology, which can realize high-quality imaging in visible light and near-infrared band.

Onboard IR-CUT, IXM462 2MP Starlight Camera can be switched to day or night mode freely with a resolution up to 1920 x 1080. With ISP, the camera has a better imaging effect. Also, we provide 99° and 127° field of view options, which you can choose according to your needs.e IMX462 camera is used on the NVIDIA platform to install the relevant driver and load the new device tree file. Currently supports Jetson Nano, Jetson Xavier NX, Jetson TX2 NX, and Jetson AGX Xavier.

Note: AGX Xavier and other interfaces are packaged differently, and you need to purchase or make an adapter board to support them.

Features:

1. Built-In IR-CUT
2. Compatible with Raspberry Pi series boards and Jetson Nano
3. Clear Imaging Even In Low Light Conditions
4. Correct Color Deviation Of Infrared Camera During The Daytime, Better Imaging Effect
5. Integrated Image Signal Processing Circuit, Clearer Imaging Effect
6. Direct Connect To Raspberry Pi Different Variants Including 4B/3B+/3A+/3B/2B/B+/A+

Package Includes:

1 x IMX462-127 2MP Starlight Camera

1 x Connecting Cables

IMX219-160 8MP IR-CUT Camera, IR-CUT Infrared Night Vision, 162° FOV, Applicable For Compute Module / Jetson Nano / Jetson Xavier NXIMX219 Camera, with 800 megapixels and 160 FOV, IR-CUT infrared, compatible with Jetson nano. You can also use it with CM3/CM3+ expansion boards like Raspberry Pi Compute Module IO board, Compute Module IO Board Plus, Compute Module POE Board of Waveshare, and the Stereo Pi board. This camera integrates IR-CUT.

Connect the IO port on the board to GPIO, input a high level (3.3V) to turn off the infrared filter and set it to night vision mode, and input a low level (GND) to turn on the infrared filter and set it to daytime mode.
In the night vision mode, the reddish effect appears when taking pictures during the day, which is a normal phenomenon.

Features:

1. Suitable for AI applications
2. IR-CUT Infrared Night Vision
3. 800 megapixels and 160 FOV
4. Facial recognition, road mark recognition
5. Compatible With Raspberry Pi Compute Module CM3 / CM3+ / CM4

Package include:

1 X IMX219-160 IR-CUT Camera (with FFC)

1 X Infrared LED Board (B) 2 PCS

Waveshare RS485 CAN Expansion Board for Jetson Nano, Digital Isolation, Built-In Protection Circuit Ship Time Lead Time: 1~3 Days. Onboard SM24CANB Transient Voltage Suppressor(TVS), Prevent The Damage Of Static Electricity, Surge Voltage And Transient Peak. Voltage, Making RS485 Communication More Stable And Safer  RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485

Features: 

1. Standard 40PIN GPIO extension header
2. Supports direct attaching to Jet-son Nano
3. Onboard CAN controller MCP2515 via SPI interface
4. Matching with SIT65HVD230DR transceiver.
5. Features RS485 function, controlled via UART

Package Includes:

1 x Waveshare RS485 CAN Expansion Board for Jetson Nano

1 x Screws package