5 inch Resistive Touch Screen LCD, with a resolution of 800×480, which supports Raspberry Pi and can also be used as a computer monitor.

Features: 

1. 800×480 hardware resolution.
2. Resistive touch control.
3. Using Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, no need to install any drivers.
4. Using as a computer monitor, it supports Windows 10 / 8.1 / 8 / 7, single touch, no need to install any drivers.
5. Support backlight control, more power saving.

Package Includes:

1 x 5inch HDMI LCD (B)

1 x HDMI cable

1 x HDMI to Micro HDMI Adapter

1 x USB type A plug to micro B plug cable

1 x Stylus

1 x RPi screws pack (4pcs)

1 x Quick start sheet

Packages Includes:

1 x 4D System 5.0″, gen4 Primary Display with Capacitive Touch compatible with Raspberry Pi

This is all-new Version V4.0 3.2 Inch TFT LCD Touch Screen for Raspberry Pi display from waveshare is big (3.2 diagonal) bright and colourful! 240320 pixels with individual RGB pixel control, this has way more resolution than a black and white 12864 display.

As a bonus, this3.2 Inch TFT LCD Screen for Raspberry Pi V4.0 display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.This display has a controller built into it with RAM buffering so that almost no work is done by the microcontroller.

This3.2 Inch TFT LCD Screen display is an alternative solution for Raspberry Pi compatible HDMI display; the 3.2 inches Resistive TFT Touch Screen Display, which uses SPI Protocol (serial peripheral interface) to communicate with the main processor. It can be mounted directly to the GPIO pins and it doesnt require any external power source.

In here we have a detailed explanation on how to install LCD drivers in a custom Raspbian image. The standard version of Raspbian does not include drivers for LCD touchscreens, so we will have to install and configure them manually.

Note: It is recommended to use a 5V 2A power adapter to power the raspberry dispatcher. Such as the use of PCs USB interface to the raspberry power supply, may be due to lack of power supply raspberry can not cause normal start.

Features:

1. Operating voltage: 3.3V
2. Resolution: 320 × 240 Pixels
3. Interface: 8080 Parallel+SPI
4. Display size: 48.6 × 64.8mm
5. DISPLAY PANEL TN
6. PIXEL PITCH 0.198 × 0.198mm
7. LCD CONTROLLER: ILI9341
8. MODULE SIZE: 94.97 × 62.24mm

Packages Includes:

1 x Waveshare 3.2inch 320×240 Touch LCD (D), With Touch Panel And Stand-Alone Controllers

The gen4 5.0” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems.

This hardware bundle includes the 4D Arduino Adaptor Shield II which allows fast and easy hardware interface to any Arduino board with the standard Arduino Headers and allows you to quickly and easily add a full colour HMI to your Arduino project.

The gen4 series was designed specifically for ease of integration and use, with careful consideration for space requirements and functionality.

These specific gen4 modules feature a 5.0” colour TFT LCD display, and come with options for Cover Lens Bezel (CLB), and resistive touch. They are powered by the well-known 4D Systems Diablo16 Graphics Processor, which offers an array of functionality and options for any Designer / Integrator / User.

The 5.0” Diablo16 Integrated Display Module features a TFT LCD Display, is capable of Touch Detection, microSD memory Storage, GPIO and Communications, along with multiple millisecond resolution timers, and Audio Generation.

The gen4 Series is 100% compatible with the Workshop4 IDE and its 4 different development environments, providing the User with a wealth of options for programming and controlling their system.

The gen4 series of Integrated Display Modules features a 30 pin ZIF socket, designed for a 30 pin FPC cable, for easy and simple connection to an application or mother board, or for connecting to accessory boards for a range of functionality advancements.

The gen4 series of modules has been designed to minimise the impact of display related circuitry, and provide a platform suitable for integration into a product. Application boards can sit flush on the back of the gen4 if required, as the display related electronics sit inside the plastic mounting base, leaving the application board surface clear for User circuitry.

Note: For more info refer to datasheet

Features:

1. Powerful 5.0” Intelligent LCD-TFT display module powered by DIABLO16.
2. 4.0V to 5.5V range operation (single supply).
3. 800 x 480 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel (on DT model only), integrated Capacitive Touch (on DCT model only), or non-touch.
4. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
5. 32Kb of SRAM purely for the User.
6. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Inputs.
7. On-board latch type micro-SD memory card connector for multimedia storage and data logging purposes.
8. DOS compatible file access (FAT16 format) as well as low level access to card memory.
9. Dedicated PWM Audio pin driven by WAV files from micro-SD card, and for sound generation, for an external amplifier.
10. Display full colour images, animations, icons and video clips.
11. Supports all available Windows fonts.

Packages Includes:

1 gen4-uLCD-50DT-SB Extra Bright Intelligent Display Module with Resistive Touch

1 x 4D Arduino Adaptor Shield-II

1 x gen4-IB Interface Board

1 x 30-way 150mm FFC Cable

1 x 5-way female-to-female ribbon cable with male-to-male adaptor

1 x Getting Started Manual Available as a Download

This is a 1.9-inch LCD Display Module with 170×320 Resolution. It supports SPI Interface, IPS, and 262K Colors output quality.

Features:

1. 170×320 resolution, 262K colors, clear and colorful displaying effect
2. SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
3. Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications:

1. Operating Voltage: 3.3v / 5v
2. Resolution: 170 × 320 Pixels
3. Communication Interface: 4-wire Spi
4. Display Size: 22.70 × 42.72 Mm
5. Display Panel Ips Pixel Size: 0.1335 × 0.1335 Mm
6. Driver: ST7789v2
7. Module Size: 27.3 × 51.2mm

Package Includes:

1 x Waveshare 1.9inch LCD Display Module

Capacitive touch screen technology USES the human body’s current induction to work. The capacitive touch screen is a four-layer composite glass screen. The inner surface of the glass screen and the interlayer are coated with one layer of ITO respectively, This conductive material responds when contacted by another electrical conductor, like your bare finger. When you touch your screen, an electric circuit is completed at the point where your finger makes contact, changing the electrical charge at this location.

Most mobile phones have both types of screens. A capacitive touchscreen is a type of touchscreen that is as transparent as glass and does not display any content or glow, it is used to sense the user’s touch actions. The TFT screen is the real screen. This is a10.1 Inch Capacitive Touch Screen LCD from waveshare, with a resolution of 1024×600 and a capacitive touch panel, which supports Raspberry Pi, Jetson Nano, Windows, and Game consoles and can also be used as a computer monitor. This product supports Windows 10 / 8.1 / 8 / 7, Raspbian / Ubuntu / Kali / Retropie, and WIN10 IoT systems single-point touch.

Applications:

1. Industrial Control
2. Charging Pile
3. Smart Home
4. Medical
5. Internet of Things
6. Robot,
7. Vehicle-mounted instruments,
8. Vending instruments
9. Intelligent CNC, cosmetic instruments

Features:

1. 1024×600 high resolution.
2. Capacitive touch control.
3. When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free.
4. When working as a computer monitor, supports Windows 10/8.1/8/7/XP, single touch, and driver free.
5. Supports BB Black, and comes with an Angstrom image.
6. Multi-language OSD menu, for power management, brightness/contrast adjustment, etc.
7. Supports 100-level backlight adjustment.
8. Firmware is up-gradable to support more new features (continually updated).

Specifications:

1. LCD Type: IPS
2. Interface: RGB
3. Touch Controller: GT7385
4. Touch Panel Type: Capacitive (10-point touch)
5. Backlight: LED
6. Display Size: (mm) 223.00 × 125.28
7. Dot Pitch (mm): 0.2175 × 0.2088
8. Aspect Ratio: 16:9
9. Resolution: 1024 × 600 (Pixel)
10. Power Consumption: TBD
11. Backlight Current: TBD
12. Operating Temperatur:e 0 ~ 70℃

 Packages Includes:

1 x Waveshare 10.1inch Capacitive Touch LCD (F), 1024 × 600, Toughened Glass, IPS Panel