Waveshare Infrared Reflective Sensor
₹299.00
- Voltage: 3.0V ~ 5.3V
- Reflective Infrared Transceiver
- I/O Pin: Digital, Analog, GND, VCC
- obstacle avoidance car
- black and white lines tracking device
- Dimension: 25mm * 15.9mm
- Mounting holes size: 2.0mm
Did you like this product? Add to favorites now and follow the product.
Description
The reflective module with IR sensor is equipped with digital and analogue output. It works with a voltage from 3 V to 5.3 V. It enables the detection of obstacles in the range from 0 to 30 mm.
An infrared sensor contains two parts: an infrared transmitter and an infrared receiver, the infrared transmitter consists of an infrared LED array as a luminophore and a PN junction made of a special material with high infrared radiation efficiency, which usually is GaAs. When a current injected into the PN junction by forward bias voltage, it can excite a source of infrared light with a center wavelength range of 830nm-950nm. The power of the infrared light excited is proportional to the current injected. However, in the case that the injected current excesses the maximum rating, the power of the infrared light may decline as the current increases. The infrared receiver is a semiconductor device for translating the infrared light signal into the electrical signal. And the core component of it is a PN junction made of a special material. Its PN junction has a different structure from the general purpose diode, enabling more infrared light to be received. As the
intensity of the infrared light enhances, more current can be generated.
Applications:
- intellectual robot
- obstacle avoidance car
- counter device in the pipeline
- black and white lines tracking device
Features:
- Reflective Infrared Transceiver
- Features wide-range voltage comparator LM393
- Adjustable sensitivity
- Signal output indicator
Package Includes:
1 x Waveshare Infrared Reflective Sensor
1 x 4-pin custom connector jumper wire
Additional information
Operating Voltage(V) | 3.3V ~ 5V |
---|---|
Detection range | 2cm ~ 30cm (depending on the obstacle's color, farthest for white) |
View angle | 35° |
Recommended environment | In door, to avoid the sunshine effect |
Interface | Aout, Dout, GND, VCC |
Baud rate | 115200 |
Mounting Holes Diameter (mm) | 3mm / 0.12 inch |
Data bits | 8 |
Dimensional Accuracy (mm) | 39mm × 15.5mm (include the IR LED) |
Quick Comparison
Settings | Waveshare Infrared Reflective Sensor remove | MR60BHA1 60GHz mmWave Module – Respiratory Heartbeat Detection | FMCW | Sync Sense | Privacy Protect remove | DFRobot 5.8GHz Microwave Radar Module remove | AMPHENOL ADVANCED SENSORS ZTP-135L THERMOPILE IR SENSOR, -20 TO 100DEG C remove | PANASONIC EKMB1306112K PIR SENSOR, DIGITAL, 17M, 4V, BLACK remove | AMPHENOL ADVANCED SENSORS THERMOPILE IR SENSOR, -20 TO 100DEG C remove | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | Waveshare Infrared Reflective Sensor remove | MR60BHA1 60GHz mmWave Module – Respiratory Heartbeat Detection | FMCW | Sync Sense | Privacy Protect remove | DFRobot 5.8GHz Microwave Radar Module remove | AMPHENOL ADVANCED SENSORS ZTP-135L THERMOPILE IR SENSOR, -20 TO 100DEG C remove | PANASONIC EKMB1306112K PIR SENSOR, DIGITAL, 17M, 4V, BLACK remove | AMPHENOL ADVANCED SENSORS THERMOPILE IR SENSOR, -20 TO 100DEG C remove | ||||||||||||||||||
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||||||||||||||||||
SKU | 1219072 | 1488396 | 1356221 | 1373958 | 1373974 | 1373957 | ||||||||||||||||||
Rating | ||||||||||||||||||||||||
Price | ₹299.00 | ₹4,949.00 | ₹1,489.00 | ₹699.00 | ₹1,999.00 | ₹399.00 | ||||||||||||||||||
Stock | Out of stock
| In Stock
| In Stock
| In Stock
| Out of stock
| In Stock
| ||||||||||||||||||
Availability | Out of stock | In Stock | In Stock | In Stock | Out of stock | In Stock | ||||||||||||||||||
Add to cart | ||||||||||||||||||||||||
Description |
|
|
|
|
|
| ||||||||||||||||||
Content | The reflective module with IR sensor is equipped with digital and analogue output. It works with a voltage from 3 V to 5.3 V. It enables the detection of obstacles in the range from 0 to 30 mm. An infrared sensor contains two parts: an infrared transmitter and an infrared receiver, the infrared transmitter consists of an infrared LED array as a luminophore and a PN junction made of a special material with high infrared radiation efficiency, which usually is GaAs. When a current injected into the PN junction by forward bias voltage, it can excite a source of infrared light with a center wavelength range of 830nm-950nm. The power of the infrared light excited is proportional to the current injected. However, in the case that the injected current excesses the maximum rating, the power of the infrared light may decline as the current increases. The infrared receiver is a semiconductor device for translating the infrared light signal into the electrical signal. And the core component of it is a PN junction made of a special material. Its PN junction has a different structure from the general purpose diode, enabling more infrared light to be received. As the Applications:
Features:
Package Includes:1 x Waveshare Infrared Reflective Sensor 1 x 4-pin custom connector jumper wire | The MR60BHA1 60GHz radar module implements personal breathing rate and heart rate detection based on Frequency Modulation Continuous Wave(FMCW) detected theory, providing a fully private and secure environment, independently from other noisy influences. Additionally, with built-in a standard algorithm and onboard antenna, the unit ensures simultaneous signal output in high accuracy. It represents an ideal solution for high-accurate, self-regulation, privacy-protected, secure biotic radar systems in consumer electronics, healthcare as well as industrial applications. Because the range resolution is heavily dependent on available bandwidth, 60 GHz mmWave sensors will offer significantly better performance than 24 GHz sensors for high-accuracy and reliable object identification. Meanwhile, 60 GHz mmWave sensors gather rich point-cloud data as it is critical to maintain high measurement accuracy for respiratory and heartbeat scenarios. As the radar works mainly on the basis of the respiratory heart rhythm causing undulating movements on the surface of the large muscles through 60 GHz mmWave, the undulation of the human chest and back will be more pronounced The MR60BHA1 radar leverages the fine performance of 60 GHz FMCW and utilizes an intelligent processing algorithm to achieve the high-accuracy output, as 85% of heartbeat detection and 90% of breathing detection. Furthermore, the radar can be independent from temperature, humidity, noise, airflow, dust, light, and other environmental influences. Designed as low power output, the radar maintains health-friendly working status while it is observed. For privacy protection, the radar provides a perfect solution that applies FMCW monitoring technology to equip surveillance capabilities without identification. The radar supports secondary development and it adapts to various scenarios applications. Using a universal UART communication interface provides an extra common protocol as 4 groups of IO that are reserved by the user’s definition. The detected area is a three-dimensional sector of 80° horizontally and 80° tilted and the measured distance is between 0.4-2 m. Applications:
Features:
Specifications:
Packages Includes:1 x MR60BHA1 60GHz mmWave Module – Respiratory Heartbeat Detection | FMCW | Sync Sense | Privacy Protect | This microwave sensor is a microwave module that can transmit an electromagnetic wave of 5.8GHz. It can detect the difference between the transmitted wave and the reflection wave to identify whether there is an object moving in the detection area. Different from the traditional sensors that can only detect human presence by detecting big body movements, this microwave sensor can perform well in detecting small movements like breathing so as to determine human presence even if the person is sitting or sleeping. The detected result can be output through the serial port or high/low level of the I/O port. Featuring high reliability and sensitivity, and strong anti-interference, it is small and easy to integrate, which can be widely used in fields that require motion detection, such as lighting, security, home, home appliances, hotels, garages, buildings, traffic, etc. Features:
Specifications:
Package Includes:1 x DFRobot 5.8GHz Microwave Radar Module | This thermopile sensor is used for non-contact surface temperature measuring. The ZTP-135SR model consists of thermo-elements, flat IR filter, Applications:
Features:
Specification:
Note: For more info refer to datasheet Packages Includes:1 x AMPHENOL ADVANCED SENSORS ZTP-135L THERMOPILE IR SENSOR, -20 TO 100DEG C | Passive infrared (PIR) sensors use a pair of pyroelectric sensors to detect heat energy in the surrounding environment. These two sensors sit beside each other, and when the signal differential between the two sensors changes (if a person enters the room, for example), the sensor will engage A Post-Implementation Review (PIR) is conducted after completing a project. Its purpose is to evaluate whether project objectives were met, to determine how effectively the project was run, to learn lessons for the future, and to ensure that the organization gets the greatest possible benefit from the project Applications:
Specifications:
Note: For more info refer to Datasheet Packages Includes:1 x PANASONIC EKMB1306112K PIR SENSOR, DIGITAL, 17M, 4V, BLACK | His thermopile sensor is used for non-contact surface temperature measuring. The ZTP-135SR model consists of thermo-elements, flat IR filter, Applications:
Features:
Note: For more info refer to datasheet Packages Include:1 x AMPHENOL ADVANCED SENSORS THERMOPILE IR SENSOR, -20 TO 100DEG C | ||||||||||||||||||
Weight | ||||||||||||||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
Additional information |
|
