M.2 NGFF Protocol Support

Outline Dimensions

Features: 

1. Fast Reading/Writing USB-C Connector, Up To 6 Gbps/S Theoretical Data Rate,
2. Faster Reading/Writing Speed Than a Normal USB Flash Drive,
3. Releasing The Original Performance Of SSD

Package Includes:

1 x USB-C adapter for SSD
1 x USB3.0 Type-A to Type-C cable ~15cm
1 x Screwdriver
1 x Screw

The RS232 TO RS485 (B) can be widely used for point-to-point, point-to-multipoint, long distance cascaded communication network between two hosts, or between host and MCU/Peripheral. It also can be used in the application scenarios that require RS232 to RS485 conversion such as Industrial Automation and IoT

RS232 TO RS485 (B) is an industrial-grade rail-type active optoisolated RS232 to RS485 converter.

Applications:

1. Industrial Automation
2. Access control
3. Self services banking
4. Parking sevices
5. highway toll stations
6. Attendance system

Features:

The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems using SPI (Serial Peripheral Interface).

W5500 suits users in need of stable internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years. W5500 uses a 32Kbytes internal buffer as its data communication memory.

Note: for more technical details go through Datasheet in the attachment section 

Features:

1. Supports following Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
2. Supports 8 independent sockets simultaneously
3. Supports Power down mode
4. Supports Wake on LAN over UDP
5. Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
6. Internal 32Kbytes Memory for Tx/Rx Buffers
7. 10BaseT/100BaseTX Ethernet PHY embedded
8. Support Auto Negotiation (Full and half duplex, 10 and 100-based)
9. Not support IP Fragmentation
10. 3.3V operation with 5V I/O signal tolerance
11. LED outputs (Full/Half duplex, Link, Speed, Active)

Specifications:

1. Operating Voltage: 3.3V operation with 5V I/O signal tolerance
2. Memory: Internal 32Kbytes Memory for Tx/Rx Buffers
3. IP Fragmentation: No
4. LED outputs: (Full/Half duplex, Link, Speed, Active)

Package Includes:

1 x WIZnet W5500

Industrial Serial Server, RS232 To RJ45 Ethernet, TCP/IP To Serial, Rail-Mount Support, With POE Function(Optional)

Features: 

1.  It combines multi functions in one  including serial server, Modbus gateway, MQTT gateway, RS232 to JSON, etc
2. The module features RS232 and Ethernet port(POE function is optional)
3. The rail-mount case design, small in size, easy to install
4. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring

Specifications:

1. Product Type: Serial server, Modbus Gateway, MQTT Gateway
2. Basic Function: Bi-directional transparent data transmission between RS232 and Ethernet
3. Communication interface: RS232 port x 1, Ethernet port x 1
4. Power supply: 6 ~ 36V DC screw terminal 6 ~ 36V DC screw terminal, or PoE port
5. Isolation Protection: Power isolation, Signal isolationEthernet common network port PoE network port, support IEEE 802.3af standard
6. 10 / 100M auto-negotiation RJ45 connector, 2 KV surge protection
7. Serial port: Isolated RS232
8. Baudrate 300 ~ 115200 bps
9. Parity bit none, odd, even, mark, space
10. Data bit: 5 ~ 9 bits
11. Flow control: N/A
12. Protocol: ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS
13. Configuration: host, web browser, device management functions library
14. Communication method: TCP/IP direct communication, VCOM
15. Operating mode: TCP server, TCP client (coexisting with TCP server), UDP, UDP multicast

Package Includes:

1 x Waveshare Industrial serial server, RS232 to RJ45 Ethernet, TCP/IP to serial, rail-mount support, with POE function

FT232RL/CH343G USB TO RS232/485/TTL Interface Converter, Industrial Isolation. Onboard unibody power supply isolation, provides stable isolated voltage and needs no extra power supply for the isolated terminal. unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, and low power consumption.

Onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, lightning proof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provide over-current/over-voltage proof, and improve shock resistance.

Features:

1. A fully automatic transceiver circuit with no delay ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other
2. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
3. Aluminum alloy enclosure with sandblasting and anodic oxidation, CNC process opening, solid and durable
4. 3 LEDs for indicating the power and transceiver status
5. High-quality USB-B and RS232 connectors, smoothly plug/pull

Package Includes:

1 x CH343G USB TO RS232/485/TTL Interface Converter, Industrial Isolation

1 x USB Cable

The ENC28J60 Ethernet Module is a board which contains an Ethernet port and converts Ethernet input into SPI. The board is based on Microchips ENC28J60 integrated circuit and it can be used to provide internet connectivity to micro-controller systems like Arduino boards over Ethernet. Since the board is small in size and it supports SPI, it is applicable to a variety of projects.

Utilizes the new SSOP 12 package Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of network protocol requirements. The board connects directly to most micro-controllers with a standard SPI interface with a transfer speed of up to 25 MHz . The ENC28J60 Ethernet Module is an industry standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI. This module includes all you need to change your Arduino into an ethernet device for your network. These days many makers prefer WiFi type network communication. Ethernet still has lots of application and still stays a fast and secure way to connect to network devices.

Features :

1. Fully Compatible with 10/100/1000Base-T Networks
2. Integrated MAC and 10Base-T PHY
3. Supports One 10Base-T Port with Automatic Polarity Detection and Correction
4. Supports Full and Half-Duplex modes
5. Automatic Programmable Retransmit on Collision
6. Programmable Padding and CRC Generation
7. Automatic Rejection of Erroneous Packets
8. SPI Interface with Clock Speeds Up to 20 MHz

Specifications:

1. Driver IC: ENC28J60-I/SO
2. Input Supply Voltage: 3.3V
3. Crystal Oscillator: 25 MHz
4. Ethernet Port: Han Run HR911105A
5. SPI Interface with Clock Speeds: 20MHz

Package include:

1 X ENC28J60 Ethernet Module