- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Input voltage: DC12-24V
- Amp Chip: TPA3116D2
- Output impedance:4~8 ohm Speaker
- Current: ≥3A
- Output power: 80W*2
- Adopt a TPA3116D2 high-performance power amplifier chip.
- With total volume, subwoofer volume, and stereo volume control knobs.
Add to Wishlist
Add to Wishlist
- Output: Continuous 40A, Burst 60A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
Add to Wishlist
Add to Wishlist
- Output: Continuous 60A, Burst 80A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: Pentium-60A: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
Add to Wishlist
Add to Wishlist
- Input: 5V(DC)
- Operating current (without signal output state): less than 15 mA
- Operating current (with signal output state): less than 40 mA
- Chip: KT403A
- Chip LDO output voltage: 3.3 V
- Chip output current: 100 mA(at Max.)
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.⅗V
- Working Current (@5V, 25℃)
- Standby: 25-30mA
- Recording: 29-35mA
- Playing: 110-150mA
- Working Current (@3.3V, 25℃)
- Standby: 23-25mA
- Recording: 25-30mA
- Playing: 70-150mA
- Working Temperature: 0~85℃
- Size: 40x20mm
- Weight: 31.5g
Add to Wishlist
Add to Wishlist
- Support High Voltage (HV) Receivers
- Input voltage: 3.7V-27V
- Max current: 30A
- 18AWG silicone cable
- JST Plug
- Cable length 20cm
- Weight: 11g – With LED indicator lamp
Add to Wishlist
Add to Wishlist
- Continuous Current: 40A
- Burst Current: 55A (10 Sec.)
- BEC Mode: Linear Mode, 5V@3A
- Programmable: Yes
- Battery cell : Li-PO / NiMH
Add to Wishlist
Add to Wishlist
1 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 2-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
Add to Wishlist
Add to Wishlist
- Output: Continuous 50A
- Burst 65A up to 10 seconds.
- Input Voltage: 2-4S Lipo, 5-12 cells N
- BEC: 5A / 5V Switch mode BEC.
- The refresh the rate of the throttle signal: 50Hz to 432
Add to Wishlist
Add to Wishlist
- Output: Continuous 20A.
- Burst 25A up to 10 seconds.
- Input Voltage: 2-3S Lipo, 5-9 cells NiMH.
- BEC: 2A / 5V Linear mode BEC.
- Refresh rate of the throttle signal: 50Hz to 432Hz.
- Size: 42mm x 25mm x 8mm.
- Weight: 19g.
Add to Wishlist
Add to Wishlist
- Output: Continuous 20A, Burst 25A up to 10 seconds.
- Input Voltage: 2-3S Lipo, 5-9 cells NiMH.
- BEC: 2A / 5V Linear mode BEC.
- Refresh rate of the throttle signal: 50Hz to 432Hz.
- Size: 42mm x 25mm x 8mm.
- Weight: 19g.
Add to Wishlist
Add to Wishlist
- Model: Wp-1060-BRUSHED
- Voltage Range: 2-3S Lipo or 5-9 NiMH
- Resistance: Fwd 0.001Ω, Rev 0.002Ω
- BEC Output: 3A/5V (Linear Mode)
- PWM Frequency: 1KHz
Add to Wishlist
Add to Wishlist
- Input Voltage: 2-3S Lipo/5-9 Cell NiMH
- Cont./Peak Current: 80A/400A
- Power Rating Upto 80 Amps
- Battery Connector Type XT-60
- BEC Output: Switch Mode: 6V/7.4V@3A
- Battery Compatibility LiPo/NiMh
Add to Wishlist
Add to Wishlist
- Model: Wp-1060-BRUSHED
- Voltage Range: 2-3S Lipo or 5-9 NiMH
- Power Rating Upto 60 Amps
- Resistance: Fwd 0.001Ω, Rev 0.002Ω
- BEC Output: 3A/5V (Linear Mode)
- PWM Frequency: 1KHz
- Battery Compatibility LiPo/NiMh
- Battery Connector Type Tamiya Connector
- Motor Connector Type 4mm Bullet Classic Crimp Terminal
Add to Wishlist
Add to Wishlist
- Brand: Seeed Studio
- Supply voltage: 3.3V +-0.2V
- Sound Pressure Level: 140 dB SPL
- Sensitivity: -26(dB, dBFS @1kHz 1Pa)
- 6 MEMS microphones: MSM261S4030H0
- Supply current: >750mA(Full brightness)
- Range of working temperature: -30 ~ 85C
Add to Wishlist
Add to Wishlist
- Signal Type: Analog signal
- Power Supply: 3.3V/5V
- Directivity: All-round
- Sensitivity: -42dB
- S/N Ratio: 59dBA
- Frequency Range: 100Hz~8KHz
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000