- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Lastest ESP32 Version: REV1
- Connectivity: WIFI & Bluetooth
- Memory: 4MB Flash4MB PSRAM
- Lithium battery interface, 500mA Max charging current
- Onboard TF CARD Slot
- Default firmware: Latest Micropython firmware
Add to Wishlist
Add to Wishlist
- ESP32 VCC range:2.2-3.6 V
- VBAT: direct to battery
- VCC: output of regulator 3.3V/600mA up to 250 mA during RF transmissions
- WiFi And Bluetooth Module
Add to Wishlist
Add to Wishlist
- MAX705 monitoring circuit with auto-reset function
- Incorporates DS3231SN high precision RTC chip, with backup battery holder
- Reset pin selection for switching watchdog
Add to Wishlist
Add to Wishlist
- Operating Voltage:5 V
- USB port:4
- Maximum Clock frequency:12 MHz
- Dimension:65x30x15 mm
Add to Wishlist
Add to Wishlist
- 3x extended USB ports, compatible with USB 2.0 / 1.1
- Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation
- Pogo pin design, for directly connecting with Raspberry Pi Zero/Zero W/Zero WH
Add to Wishlist
Add to Wishlist
- Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
- Servo voltage: 5V
- Logic voltage: 3.3V
- Driver: PCA9685
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V/5V
- Control Chip: PCA9685
- PWM Resolution: 12-bit
- Logic Voltage:3.3V
- Communication: I2C
- Dimension: 56.6*65mm
Add to Wishlist
Add to Wishlist
- Compatible with Raspberry Pi
- Multifunctional GPIO extension board 1 to 3 port DIY
Add to Wishlist
Add to Wishlist
- Center female pin header for direct attaching the Raspberry Pi Pico.
- Extra USB connector for external power supply.
- Immersion Gold Process
- Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic
Add to Wishlist
Add to Wishlist
- RP2040 SoC ARM Cortex M0+ running up to 133Mhz
- SRAM 264kB
- Flash Storage 2MB of QSPI
- LiPo / Li-ion battery charging
- USB Port Micro USB
Add to Wishlist
Add to Wishlist
- Driver-free, plug and play, compatible with OS including Windows, Mac OS, Linux, and Android
- Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi versions as well
- Comes with development resources and manual
Add to Wishlist
Add to Wishlist
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
Add to Wishlist
Add to Wishlist
- Compatible with 3.3v or 5v I/O Arduino Board.
- Frequency Band: 433 MHZ (Pre-configure in factory)
- Low power consumption
- Compatible with Arduino Leonardo, Uno, Mega2560, DUE
- External Antenna via SMA Jack
Add to Wishlist
Add to Wishlist
- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
Add to Wishlist
Add to Wishlist
- Working Voltage: 5V
- MCU: ATMEGA328P
- Dimensions 88mm x58mm x23mm
- Weight: 51g
- Raspberry Pi Connector Pins: 26
Add to Wishlist
Add to Wishlist
- Master Control Resource: ESP32-PICO-D4
- Flash Memory: 4MB
- Input Voltage 5V
- Operating Current: 500mA
- Standby Current: 100mA (max)
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000