- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Model: Adafruit Assembled Data Logging shield
- SD card interface: FAT16 or FAT32
- Onboard regulator: 3.3 V
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged
Add to Wishlist
Add to Wishlist
- Power Supply:5 V
- Output Current:800mA
- Dimension:60x56x20 mm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:8 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x700 mm
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:7 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:11 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:10 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:13 gm
Add to Wishlist
Add to Wishlist
- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
Add to Wishlist
Add to Wishlist
- Simple design, an adapter board combined use with Xbee products.
- Adapter the Xbee 20-pin to dual-row pins with 0.1-inch standard spacing (dual rows with 0.5-inch distance).
- Identifies the pin with the corresponding screen print.
- Free soldering to the board with female socket
Add to Wishlist
Add to Wishlist
- Designed for 915mhz but works fine on 868mhz too
- Weight: 0.9g
- ~40mm stem
- ~55mm wide top segment (not RF elements)
- Works great with the TBS Crossfire Nano Rx
Note: This is not an original TBS product, but a high-quality clone of one.
Add to Wishlist
Add to Wishlist
- Specially designed for VTX/RX for long range FPV
- Omnidirectional (compatible with video TX/RX)
- Directional Diagram: all-around( Omnibearing)
- Polarization:Circular polarization Right-handed(RHCP)
- Greatly increases video and audio signal.
Add to Wishlist
Add to Wishlist
- Model: ROTG01 (UVC OTG FPV Receiver)
- Connector Type: SMA Female (Antenna)
- Current consumption: 200 mA
- Length of Antenna: 11 cm
- No. of Channels: 150
Add to Wishlist
Add to Wishlist
- Product: Triple Feed Patch 5.8GHz Antenna SMA
- Center frequency: 5.8 GHz
- Bandwidth: 660 MHz (5.47 – 6.13 GHz)
- Matching: S11 < -20 dB, VSWR < 1.22 (at center frequency)
- Axial ratio: < 1.3
Add to Wishlist
Add to Wishlist
- Product: Triple Feed Patch 5.8GHz Antenna RP SMA
- Center frequency: 5.8 GHz
- Antenna gain: 9.4 dBi
- Bandwidth: 660 MHz (5.47 – 6.13 GHz)
- Axial ratio: < 1.3
Add to Wishlist
Add to Wishlist
- Product: 915Mhz 500MW Telemetry Kit
- UART interface
- Transparent serial link
- Open-source SIK firmware
- Configurable through *Mission Planner and *APM Planner
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000