- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- FPGA: Intel® Cyclone® 10CL016
- PCI: Mini PCI Express port with programmable pins
- Camera Connector: MIPI camera connector
- Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
- Radio module: u-Blox NINA-W102 (datasheet)
- Board Power Supply :(USB/VIN) 5V
- All pins are PWM pins
- MIPI camera connector
- Mini PCI Express port with programmable pins
- Full-Speed USB Device and embedded Host
Add to Wishlist
Add to Wishlist
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Supported Battery(*): Li-Po single cell, 3.7V, 700mAh minimum
- DC Current for 3.3V Pin: 600mA
- Comes with a micro SD card holder
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:8 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x700 mm
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:7 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:11 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:10 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:13 gm
Add to Wishlist
Add to Wishlist
- Designed for 915mhz but works fine on 868mhz too
- Weight: 0.9g
- ~40mm stem
- ~55mm wide top segment (not RF elements)
- Works great with the TBS Crossfire Nano Rx
Note: This is not an original TBS product, but a high-quality clone of one.
Add to Wishlist
Add to Wishlist
- Shorter Time-To-Market
- Give new life to existing products
- Add connectivity for monitoring and control
- Tailor it to your need, each I/O pin can be configured
- Make equipment smarter to be ready for the AI revolution
Add to Wishlist
Add to Wishlist
- Microcontroller: ATmega328P
- Circuit operating voltage: 5V
- The input voltage ranges from 6v to 20V
- Digital I/O Pins: 14
- Analog i/p pins are 6.
- 1 kb of EEPROM memory
- USB connector: USB-C
Add to Wishlist
Add to Wishlist
- ATmega32U4 Microcontroller
- Input Voltage: 7-12V
- 20 Digital I/O Pins
- micro USB connection
Add to Wishlist
Add to Wishlist
- 14 digital inputs/outputs, including 6 PWM inputs
- 6 analog inputs
- 1 ICSP connector
- 1 revised and corrected reset circuit
Add to Wishlist
Add to Wishlist
- Specially designed for VTX/RX for long range FPV
- Omnidirectional (compatible with video TX/RX)
- Directional Diagram: all-around( Omnibearing)
- Polarization:Circular polarization Right-handed(RHCP)
- Greatly increases video and audio signal.
Add to Wishlist
Add to Wishlist
- Microcontroller: 64 MHz Arm® Cortex M4 (nRF52832)
- Connectivity: Bluetooth® 4.2
- Interface: USB interface with debug functionality
- Tiny size, packed with features
- Low power consumption
- Add sensing capabilities to existing projects
- Weight: 2g
Add to Wishlist
Add to Wishlist
- MICROCONTROLLER: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- This Arduino MKR1000 WIFI without headers
- 5V board power supply
- Supports Li-Po cell, 3.7V, 700mAh minimum
- 8 digital I/O pins
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000