- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage range:1.71V to 3.6V
- Power consumption @ 1.8V:0.55 mA (High) ,0.26 mA(Low)
- Smart FIFO up to 9 Kilobyte based on features set
- Embedded temperature sensor:16 bit
Add to Wishlist
Add to Wishlist
- LSM303D 6DoF Motion Sensor
- ±2/±4/±8/±12 gauss magnetic scale
- ±2/±4/±6/±8/±16 g linear acceleration
- 16-bit data output
- 3.3V or 5V compatible
- I2C interface, with address select via ADDR cuttable trace (0x1D or 0x1E)
- Reverse polarity protection
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V-5.5V
- Low Power Consumption
- High Accuracy
- I2C Communication
- Small Size
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V~5V
- Operating Current: 8~10uA
- Interface: Gravity-I2C
- I2C Address: 0x19 (default) / 0x18 (optional)
- User-selectable Scale: ±2g/±4g/±8g/±16g
- Operating Temperature: -40℃~+85℃
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3~5V
- Communication: Digital
- Connector: Gravity
Add to Wishlist
Add to Wishlist
- Good Quality material
- 96-230Vac operating input range
- 50,000 hours MTBF
- 6-month warranty.
- Input Current: 0.5A maximum
- Input Power consumption (no load): 0.075W maximum
- USB-C connection goes straight into your Raspberry Pi
Add to Wishlist
Add to Wishlist
- 1.5 Meter Cable lead
- Micro USB Connector
- Input: 90~264 V AC @47/63 Hz
- Output: 5.2V, 2.5A
- Interchangeable heads for different countries
- 50,000 hours MTBF
Add to Wishlist
Add to Wishlist
- 3-axis gravity accelerometer and 3-axis gyroscope
- On-chip temperature sensor
- Communication protocol I2C:0x68
- Accelerometer noise 100 μg/√Hz
- Gyroscope sensitivity error 1%
- Gyroscope noise ±4 mdps/√H
Add to Wishlist
Add to Wishlist
- Output voltage: +8.0V DC
- Minimum load current: 0.01A
- Nominal load current: 6.0A
- Maximum power: 48.0W
- Load regulation: ±5%
- Line regulation: ±5%
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Current Consumption: 140uA (sleep mode)/ 520uA (Accelerometer mode only)/ 4.27mA (Gyro mode only)/ 4.9mA (accelerometer and gyro mode)
- Initial Sensitivity: accelerometer ±1%; gyro ±1%
- Non-linear Sensitivity: accelerometer ±0.5%, gyro ±0.1%
- Interface: I2C/SPI(7MHz)
- Selectable Scale: ±2g/±4g/±8g/±16g
- Gyroscope Range: ±125/±250/±500dps
Add to Wishlist
Add to Wishlist
- Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4).
- A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance.
- Nickel-plated connectors for highest signal transfer rate and resistance in corrosion.
- A large gauge PVC jacket provides maximum shielding against wear and tear and extreme temperatures.
- Reinforced quad-layer braided shielding and Mylar-foil shielding provides utmost protection against RF and EM interference.
- Supports 480i, 480p, 720p, 1080i, 1080p, 1440p and 4K@60p resolution HDMI plug to HDMI plug leads
- Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models
Add to Wishlist
Add to Wishlist
- 1.62V to 3.6V supply voltage,
- Supply Voltage −0.3 to 3.6 V
- Mechanical Shock 10,000 g
- User selectable data output rate
- I2C Interface
- One interrupt pin
Add to Wishlist
Add to Wishlist
- Nickel Plated Connector Pins
- Fully triple shielded for increased noise immunity
- Length: 10cm
- 4Kp60 compliant
- 20Mohm 300VDC insulation withstands 300VDC for 0.1s
- Compatible with: Raspberry Pi Zero; Raspberry Pi Zero W; Raspberry Pi Zero W2
Add to Wishlist
Add to Wishlist
- Power Supply: 3.3V.
- Temperature Range: -40~85°C.
- Digital Interface: I2C/SPI.
- Programmable Interrupt.
- Resolution: 0.3μT.
Add to Wishlist
Add to Wishlist
- Supply Voltage: 3.3V to 5V.
- Indicator LED on board.
- Interface: Digital.
- Easily precognitive interfaces of sensors (“A” for analog and “D” for digital).
Add to Wishlist
Add to Wishlist
- Can be used for All development Board with C type port for 5V@3A supply
- Supports Reversible plug orientation
- Simple Plug and Play device, no driver software required.
- Supports High-speed data transfers
- Can be Use for Mobile and Tablets with Fast Charging support
- Compact and Light Weight
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000