- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Main chip: ESP32-WROVER-B, SIM7000G
- Flash Memory:4M Flash / 8M PSRAM
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- SIM Card Size: Nano SIM Card
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
Add to Wishlist
Add to Wishlist
- Main chip:ESP32 WROVER-B
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
Add to Wishlist
Add to Wishlist
- Operating voltage range:1.71V to 3.6V
- Power consumption @ 1.8V:0.55 mA (High) ,0.26 mA(Low)
- Smart FIFO up to 9 Kilobyte based on features set
- Embedded temperature sensor:16 bit
Add to Wishlist
Add to Wishlist
- Very low power logging is supported
- Built-in MCP73831 single cell LiPo charger
- Current consumption
- ~20mA (Run)
- ~80µA (Sleep)
- ~18µA (Deep Sleep – regulator shut down)
- LEDs
- Power
- LiPo charge indicator
- Serial Tx and Rx
- Status
Add to Wishlist
Add to Wishlist
- Power amplifier chip NS4168
- I2S serial digital audio input interface
- Support a wide range of sampling rates: 8kHz~96kHz
- Automatic sampling rate detection, adaptive function
Add to Wishlist
Add to Wishlist
- Support type:16G FAT/FAT32 MicroSD
- Compatible with ATOM Matrix/ ATOM Lite
- Up to 16G TF card
- FAT/FAT32 format
Add to Wishlist
Add to Wishlist
- ESP32 Standard wireless functions WiFi, Bluetooth
- Internal 4M Flash
- Low Power Display
- 180-degree viewing angle
Add to Wishlist
Add to Wishlist
- LSM303D 6DoF Motion Sensor
- ±2/±4/±8/±12 gauss magnetic scale
- ±2/±4/±6/±8/±16 g linear acceleration
- 16-bit data output
- 3.3V or 5V compatible
- I2C interface, with address select via ADDR cuttable trace (0x1D or 0x1E)
- Reverse polarity protection
Add to Wishlist
Add to Wishlist
- Input Voltage:3-5.5 V
- Flash Memory:8 MB
- Powered by RP2040
- User controllable RGB LED
- USB-C connector for power, programming, and data transfer
Add to Wishlist
Add to Wishlist
- Input Voltage (V):3.3V@600mA
- Processor: Kinetis KL26 Arm® Cortex®-M0+ MCU
- Maximum Clock Frequency (MHz):48
- Flash Memory:128kB
- SRAM:16kB
- Dimension:95x38x10 mm
- Weight:21 gm
Add to Wishlist
Add to Wishlist
- Working voltage: 3.3V
- Input voltage: 3.3V~5V
- Support electric current of low power consumption: 10 μA
- Support maximum discharge current: 600mA
- Quick Response(the top frequency is 400KHz)
- Cost-effective
- Small size, convenient to install
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V-5.5V
- Low Power Consumption
- High Accuracy
- I2C Communication
- Small Size
Add to Wishlist
Add to Wishlist
- WiFi+Bluetooth 4.0 Dual-mode Module
- GDI Display Port, easy to connect
- Operating Voltage: 3.3V
- Input Voltage: 3.3V~5.5V
- Support Low-Power: 10uA
- ESP32 Dual-core low power main controller, 10uA power consumption
Add to Wishlist
Add to Wishlist
- Operating Current: 3.3V
- Operating Frequency: 433MHz
- Modulation Type: LoRaTM
- Output Power: ≤20dBm
- Receiving Sensitivity: -139dBm
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V~5V
- Operating Current: 8~10uA
- Interface: Gravity-I2C
- I2C Address: 0x19 (default) / 0x18 (optional)
- User-selectable Scale: ±2g/±4g/±8g/±16g
- Operating Temperature: -40℃~+85℃
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3~5V
- Communication: Digital
- Connector: Gravity
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000