- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 12V
- Current requirement: 1A-2A
- Rated power: 6-7W
- HDMI input: version HDMI 1.1
- VGA input: 1280×800 physical resolution
- Brightness: 350 lumens
- Panel type: TFT
- Display Type: Capacitive Touch Display
- Number of wiring: 40 PIN LVDS
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Power Supply: 3.3V~5.5 V
- Communication: I2C, UART
- Wireless Mode: IEEE802.11b/g/n
- Encryption Type: WPA WPA2/WPA2–PSK
- WiFi Frequency: 2.4GHz
Add to Wishlist
Add to Wishlist
- LCD Type : TFT
- LCD Interface: SPI
- Touch Screen Type: Resistive
- Touch Screen Controller: XPT2046
- Colors: 65536
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Power Requirements:D.C.+5V ( Maximum 100mA, typical 70mA, 50mV peak to peak maximum ripple)
- Interface:USB 1.1
- Operating Temperature:0 to 50 ℃
- Storage Temperature:-40 to 80 ℃
- Relative Humidity:95% at 60 ℃
- Supports operations systems including Windows 8, Windows 7, Windows 98, 2000, NT4, Me, XP, XP Tablet Edition, CE 2.12, CE 3.0, CE.net, Linux, DOS & iMac
Add to Wishlist
Add to Wishlist
- Power Supply:5-80 V
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
Add to Wishlist
Add to Wishlist
- Lcd Type: TFT
- Lcd Interface: SPI
- Touch Screen Type: Resistive
- Touch Screen Controller: XPT2046
- Colors: 65536
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Display Size:7 inches
- Resolution:800×480
- Display Port:DSI
- Touch Type:Capacitive
- Touch Points:5 Points
Add to Wishlist
Add to Wishlist
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
Add to Wishlist
Add to Wishlist
- Display Size:7 inches
- Resolution:1024×600,
- Display Port:DSI
- Touch Type:Capacitive
- Touch Points:5 Points
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V
- Modulation: LoRa/(G)FSK
- Emit power: > 14dBm@3.3V
- RF chip: SX1262
Add to Wishlist
Add to Wishlist
- Model: ESP32-CAM-MB
- Color: Black
- Chipset: CH340G
- Connectivity Technology: USB
Add to Wishlist
Add to Wishlist
- Mini wi-fi device.
- Operating voltage: 5V.
- Serial Wi-Fi Adapter Module.
- Dimensions : 6x5x1.
- Color: Blue
Add to Wishlist
Add to Wishlist
- 7inch IPS display with capacitive touch panel, hardware resolution is 1024 x 600
- Capacitive touch, supports up to 5-points touch
- Toughened glass capacitive touch panel, 6H hardness
- DSI interface, refresh rate up to 60Hz.
Add to Wishlist
Add to Wishlist
- Raspberry Pi Capacitive Touch Display
- Resolutions: 800×480
- Size: 5inch
- Display port: DSI
- Power Consumptions: Low power
- Touch Type: Capacitive
Add to Wishlist
Add to Wishlist
- Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor
- Operating Voltage: 2.7V – 4.2V
- Working Current: 60mA
- Battery Charging Current: 500mA
- On-board 0.96inch 160×80 pixels 65K color IPS LCD display
- On-board single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design
Add to Wishlist
Add to Wishlist
- Power input: 5V
- CM4 socket: suitable for all variants of Compute Module 4
- USB: USB 2.0 × 1
- Connector: MIPI CSI 22PIN 0.5mm camera connector
- Fully laminated touch screen. 2.8″ display with 5-point capacitive touch control, better touch experience from the fully laminated screen, together with 6H toughened glass panel, safer to use.
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000