- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage range:1.71V to 3.6V
- Power consumption @ 1.8V:0.55 mA (High) ,0.26 mA(Low)
- Smart FIFO up to 9 Kilobyte based on features set
- Embedded temperature sensor:16 bit
Add to Wishlist
Add to Wishlist
- LSM303D 6DoF Motion Sensor
- ±2/±4/±8/±12 gauss magnetic scale
- ±2/±4/±6/±8/±16 g linear acceleration
- 16-bit data output
- 3.3V or 5V compatible
- I2C interface, with address select via ADDR cuttable trace (0x1D or 0x1E)
- Reverse polarity protection
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V-5.5V
- Low Power Consumption
- High Accuracy
- I2C Communication
- Small Size
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V~5V
- Operating Current: 8~10uA
- Interface: Gravity-I2C
- I2C Address: 0x19 (default) / 0x18 (optional)
- User-selectable Scale: ±2g/±4g/±8g/±16g
- Operating Temperature: -40℃~+85℃
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3~5V
- Communication: Digital
- Connector: Gravity
Add to Wishlist
Add to Wishlist
- 3-axis gravity accelerometer and 3-axis gyroscope
- On-chip temperature sensor
- Communication protocol I2C:0x68
- Accelerometer noise 100 μg/√Hz
- Gyroscope sensitivity error 1%
- Gyroscope noise ±4 mdps/√H
Add to Wishlist
Add to Wishlist
- Input Voltage: 3.3V~5.5V
- Operating Current: 5mA (25mA in VOC Measurement)
- Communication Interface: I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V)
- Default I2C Address: 0x76
- Temperature Measurement Range: -40℃~+85℃
- Temperature Measurement Precision: ±1.0℃(0~65℃)
- Humidity Measurement Range: 0-100%r.H.
- Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Current Consumption: 140uA (sleep mode)/ 520uA (Accelerometer mode only)/ 4.27mA (Gyro mode only)/ 4.9mA (accelerometer and gyro mode)
- Initial Sensitivity: accelerometer ±1%; gyro ±1%
- Non-linear Sensitivity: accelerometer ±0.5%, gyro ±0.1%
- Interface: I2C/SPI(7MHz)
- Selectable Scale: ±2g/±4g/±8g/±16g
- Gyroscope Range: ±125/±250/±500dps
Add to Wishlist
Add to Wishlist
- 1.62V to 3.6V supply voltage,
- Supply Voltage −0.3 to 3.6 V
- Mechanical Shock 10,000 g
- User selectable data output rate
- I2C Interface
- One interrupt pin
Add to Wishlist
Add to Wishlist
- Power Supply: 3.3V.
- Temperature Range: -40~85°C.
- Digital Interface: I2C/SPI.
- Programmable Interrupt.
- Resolution: 0.3μT.
Add to Wishlist
Add to Wishlist
- Supply Voltage: 3.3V to 5V.
- Indicator LED on board.
- Interface: Digital.
- Easily precognitive interfaces of sensors (“A” for analog and “D” for digital).
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3V DC.
- Working Current: 35mA.
- Output Signal: I2C, UART.
- Working Temperature: -20~70℃.
- Size: 30mm x 20.5mm/1.18 x 0.81″
Add to Wishlist
Add to Wishlist
- 40PIN GPIO, Compatible with all the Raspberry Pi Boards.
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Communication interface: I2C/SPI
- Dimension: 27mm x 20mm
- Mounting hole size: 2.0mm
Add to Wishlist
Add to Wishlist
- Gravity interface, no need to solder, plug and play
- Switchable I2C and UART, two output modes
- Highly integrated module can test a variety of data at the same time
- Reasonable layout and high precision
Add to Wishlist
Add to Wishlist
- Acceleration and Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 6 DOF modules
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000