- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- User name and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Adjustable display brightness and contrast
- Multiple alarms
- Servo reversing and end-point adjustment
- Adjustable servo travel limit (prevents pushrod jamming)
Add to Wishlist
Add to Wishlist
- Operating Voltage (VDC):7.4-12 V
- No of channels:12
- User name and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Adjustable display brightness and contrast
- Multiple alarms
Add to Wishlist
Add to Wishlist
- Model: R9 STAB OTA
- Numbers of Channel: 8/16CH (CH16 outputs RSSI)
- Operating Voltage: DC 3.5V~10V
- Operating Current: 140mA@7.4V
- Measuring range of gyroscope: ±2000dps
- Measuring range of acceleration: ±4g
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Open-source operating system
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- This Remote comes with 2 x 18650 battery holder for power supply
- It is also compatible with a 2S battery with 3pin JST (XH) connector ( Battery Slot size is 92 x 57 x 18 mm (L x W x H)
- Installed with ACCESS protocol
- High-speed module digital interface
- Supports spectrum analyzer function
- Supports wired training function
- Haptic vibration alerts and voice speech outputs
Add to Wishlist
Add to Wishlist
- Model: Frsky R9 M Lite Pro Receiver
- Channel: 16CH
- Supports: Spectrum analyzer
- RF Operating Frequency: 868MHz / 915MHz
- RF Power (Non-LBT): 10mW / 100mW / 500mW / 100mW~1W
Add to Wishlist
Add to Wishlist
- Compatibility: ACCST D16 and ACCESS receivers Communication Protocol:ACCST D16 /ACCESS Feel Free to Choose
- Classic Taranis form factor design Easy launch momentary button
- Program navigation button High-speed module digital interface
- Installed with ACCESS protocol Supports spectrum analyzer function
- Supports SWR indicator warning G9D potentiometer gimbal Supports wired training function
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Input power: 4.0-6.5V DC
- Channels: 6 Channels
- Frequency range: 2.4~2.5 GHz
- Bandwidth: 500KHz
- RF receiver sensitivity: -105dbm
- Modulation: GFSK
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Material: Aluminum alloy
- Applicable models: for Mavic Air/Mavic Mini/, Mavic 2 Pro Zoom.
- Colour: Black, Red
- Net weight: 3.6g (1 pair)
- Product size: 2*1cm (single)
Add to Wishlist
Add to Wishlist
- Channel: 4CH
- Weight: 2.2g
- Resolution: 1024
- PWM Output: Yes
- Operating Voltage: 3.5-10V
- Current: 50MA
- Antenna Length: 100mm
- Control Range: >500M+
- Compatibility: Compatible with Frsky X9D (D8 Mode), XJT (D8 Mode), DJT, DFT, DHT
Add to Wishlist
Add to Wishlist
- RX lead length:100mm
- Power in/out lead length:100mm (each)
- Switching load current (DC):5A (Continuous current)
- Input Voltage (DC):5-28V
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000