- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Compatibility: NEMA17
- Material: Copper
- Length: 1000 mm (100 cm)
- Connector at end 1: JST XH
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- On-chip display RA
- DPI 111
- Interface UART
- Baud rate with Arduino 230400
Add to Wishlist
Add to Wishlist
- Step Angle:1.8°
- No. of Leads: 4
- D-Type
- Shaft Length (mm) : 37
- Shaft Diameter (mm) : 14
- Holding Torque (kg-cm) : 122
- Temperature Rise: 80ºCmax
Add to Wishlist
Add to Wishlist
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 60
- Current/Phase A: 0.4
- No of Leads: No. 6
- Shaft type: Round
Add to Wishlist
Add to Wishlist
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 60
- Current/Phase A: 1.7
- No of Leads: No. 4
- Shaft type: Round
Add to Wishlist
Add to Wishlist
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 99
- Current/Phase A: 5.5
- No of Leads: No. 4
- Shaft type: Keyway Type
Add to Wishlist
Add to Wishlist
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 40
- Current/Phase A: 0.4
- No of Leads: No. 6
- Shaft type: Round
Add to Wishlist
Add to Wishlist
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 60
- Current/Phase A: 1.2
- No of Leads: No. 6
- Shaft type: Single D-Type
Add to Wishlist
Add to Wishlist
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 51
- Current/Phase A: 1
- No of Leads: No. 6
- Shaft type: Round
Add to Wishlist
Add to Wishlist
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 76
- Current/Phase A: 2.8
- No of Leads: No. 4
- Shaft type: Round
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000