- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Regulated Power Supply: 5V 1A
- Regulated Power Supply Efficiency (3.7V BAT IN): 86%@50%Load
- USB/Solar Charge Efficiency: 73%@3.7V 900mA BAT IN
- Quiescent Current: <1 mA
- Operation Temperature: -40℃~85℃
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Power supply voltage: 15-28VDC(Recommended 16-25VDC)
- Over Charge Voltage is 14.8V
- Float Charge Voltage is 13.55V
- Maximum charge current: 3A
- Quiescent current: about 1.8mA
- High PWM Switching Frequency:300KHz
- Operating Ambient Temperature: -40℃ to +85℃
- Size: 66 x 20x 12mm
- Weight: 9g
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Over-discharge protection.
- 18650 Lithium Battery Equalizer Board.
- Type: Voltage Regulator.
- Supply Voltage: 25.2v
- Dissipation Power:18650 Lithium Battery Balanced Function Board.
- No. resistors: 6
- Values of resistor: 620R
Add to Wishlist
Add to Wishlist
- Type: Voltage Regulator
- Supply Voltage:29.6
- Dissipation Power:18650 Lithium Battery Balanced Function Board
- Operating Temperature: Discharge Shunt balanced 4.2V 66mA
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- On-chip display RA
- DPI 111
- Interface UART
- Baud rate with Arduino 230400
Add to Wishlist
Add to Wishlist
- Type: Voltage Regulator
- Supply Voltage: 11.1V/12.6V
- Dissipation Power: 18650 Lithium Battery Balanced Function Board
- Operating Temperature: Discharge Shunt balanced 4.2V 66mA
Add to Wishlist
Add to Wishlist
- Overcharge Range:4.25±0.05V
- Charging Voltage:12.6V-13V
- Upper Transient Current:40A±5A
- Upper Operating Current:8A
- Power flow: Less than 30uA
Add to Wishlist
Add to Wishlist
- Model: Li-ion 18650
- Product: Li-ion BMS
- Charging voltage: 3.7V
- Charging current: 2A-9A
- Single-cell consumption of battery (self-consumption): ≤3uA
- Weight:5 gm
Add to Wishlist
Add to Wishlist
- Charging voltage: 3.7V
- Overcharge Detection Voltage: 4.25 ± 0.05V
- Overcharge release voltage: 4.23 ± 0.05V
- Over discharge detection voltage: 2.45 ± 0.1V
- Upper Limit Continuous Current: 5A
Add to Wishlist
Add to Wishlist
- Over charge detection voltage : 4.25 + 0.05V
- Over charge release voltage : 4.23 + 0.05V
- discharge detection voltage : 2.45 + 0.1V
- Ceiling continuous current : 12A
- Overcurrent detection current : 7.5A
- Input Charging voltage : 3.7V
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000