- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Input Voltage (V): 7 ~ 24
- Max. Continuous Current: 1A
- Peak Motor Current: 2A@10s
- PWM Frequency: 20Khz
- On-Board DC motor Driver L298N.
- 5 mm standard DC plug-in jack for Input supply
Add to Wishlist
Add to Wishlist
- Operating Voltage: 6-30 VDC
- Operating Current: up to 8A
- Material: ABS
- Frequency:16 Khz
- Dimension:80x40x25 mm
Add to Wishlist
Add to Wishlist
- Nominal Voltage:6~30 V
- continuous Current:50A
- peak Current: 100A
Add to Wishlist
Add to Wishlist
- Working voltage: 4.5V to 5.5 V
- Transmit tube pressure drop: Vf = 1.6 V
- Transmit tube current: 20 mA
- Distinguish precision: 0.01 mm
- Measurement frequency, 100 kHz
Add to Wishlist
Add to Wishlist
- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
Add to Wishlist
Add to Wishlist
- Encoder Type: Optical
- IP54 (IEC Standard) Protection
- High-Quality 2-Meter Cable
- Anti-jamming performance
- Small size, lightweight
- Stainless Steel Shaft
- Line interface with waterproof protection
Add to Wishlist
Add to Wishlist
- Power: 3.3V ~ 5V
- Dimension: 26.8mm × 15mm × 18.7mm
- Mounting holes size: 3mm
- Gap width: 6mm
Add to Wishlist
Add to Wishlist
- Supply voltage: from 3.0 V to 5.3 V
- It detects the clockwise and counterclockwise rotation
- The number of steps in 360°: 20 steps
- Button in the knob
- Pulses per lap: 15 pluses
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V~5V
- Total Rotating Angle: 360°
- Pulses Per Revolution: 20
- Interface: two Gravity connectors; I2C
- Cascadable Device Number: 4
Add to Wishlist
Add to Wishlist
- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Speed regulation mode: potentiometer (linear)
- Support motor: DC brush motor
Add to Wishlist
Add to Wishlist
- Drive plate type: JYQD_V6.3E2
- Voltage range: 15V-36V
- Peak current: 20A
-
PWM speed control: PWM frequency 1-20KHZ
-
Duty cycle: 0-100%
- Drive power: ≤ 500W
Add to Wishlist
Add to Wishlist
- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
Add to Wishlist
Add to Wishlist
- Type: Optical Sensor
- Interface: GPIO
- Compatibility: mikroBUS
- Click board: (28.6 x 25.4 mm)
- Input Voltage: 3.3V or 5V
Add to Wishlist
Add to Wishlist
- Maximum Power: 2000W
- Operating Voltage: 9-55 VDC
- Operating Current: 0-40 A
- Control Frequency: 25KHZ
Add to Wishlist
Add to Wishlist
- Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW
- Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder
- Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback
- Onboard 9-axis IMU to obtain attitude and heading information at any time
- Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery module
Add to Wishlist
Add to Wishlist
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
- Peak Current (A): 600 mA
- No. of Channels: 1
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000