- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Working voltage: 4.5V to 5.5 V
- Transmit tube pressure drop: Vf = 1.6 V
- Transmit tube current: 20 mA
- Distinguish precision: 0.01 mm
- Measurement frequency, 100 kHz
Add to Wishlist
Add to Wishlist
- Input Voltage: 3.3V~5.5V
- Operating Current: 5mA (25mA in VOC Measurement)
- Communication Interface: I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V)
- Default I2C Address: 0x76
- Temperature Measurement Range: -40℃~+85℃
- Temperature Measurement Precision: ±1.0℃(0~65℃)
- Humidity Measurement Range: 0-100%r.H.
- Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3V DC.
- Working Current: 35mA.
- Output Signal: I2C, UART.
- Working Temperature: -20~70℃.
- Size: 30mm x 20.5mm/1.18 x 0.81″
Add to Wishlist
Add to Wishlist
- Encoder Type: Optical
- IP54 (IEC Standard) Protection
- High-Quality 2-Meter Cable
- Anti-jamming performance
- Small size, lightweight
- Stainless Steel Shaft
- Line interface with waterproof protection
Add to Wishlist
Add to Wishlist
- Power: 3.3V ~ 5V
- Dimension: 26.8mm × 15mm × 18.7mm
- Mounting holes size: 3mm
- Gap width: 6mm
Add to Wishlist
Add to Wishlist
- 40PIN GPIO, Compatible with all the Raspberry Pi Boards.
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Communication interface: I2C/SPI
- Dimension: 27mm x 20mm
- Mounting hole size: 2.0mm
Add to Wishlist
Add to Wishlist
- Supply voltage: from 3.0 V to 5.3 V
- It detects the clockwise and counterclockwise rotation
- The number of steps in 360°: 20 steps
- Button in the knob
- Pulses per lap: 15 pluses
Add to Wishlist
Add to Wishlist
- Gravity interface, no need to solder, plug and play
- Switchable I2C and UART, two output modes
- Highly integrated module can test a variety of data at the same time
- Reasonable layout and high precision
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V~5V
- Total Rotating Angle: 360°
- Pulses Per Revolution: 20
- Interface: two Gravity connectors; I2C
- Cascadable Device Number: 4
Add to Wishlist
Add to Wishlist
- PM, NOx, VOC, RH & T Sensor Platform
- Fast and Easy integration
- One Driver for up to 8 data signal
- Superior Sensing accuracy and lifetime
- Fully calibrated digital output
Add to Wishlist
Add to Wishlist
- Rated input voltage AC: 220~240V
- Input rated current <5mA
- Input voltage frequency 50/60Hz
- Ozone concentration <0.1mg/h
Add to Wishlist
Add to Wishlist
- Working Voltage: 5.0V DC
- Working Current: 140mA@5V(Peak 264mA@5V)
- Data Update: cycle 2s
- Output Method: RS485/UART
Add to Wishlist
Add to Wishlist
- Type: Optical Sensor
- Interface: GPIO
- Compatibility: mikroBUS
- Click board: (28.6 x 25.4 mm)
- Input Voltage: 3.3V or 5V
Add to Wishlist
Add to Wishlist
- Brand: DFRobot
- Product: Intelligent Rain Detection Module
- Serial Communication Rate: 115200 bps
- Voltage: 3.3V
- Operating Current: <50mA
- Temperature Range: -40℃~85℃
Add to Wishlist
Add to Wishlist
- Product: M5StickC ENV III HAT (SHT30, QMP6988)
- Maximum temperature measurement range: -40 ~ 120 ℃
- Highest measurement accuracy: 0 ~ 60 ℃/±0.2℃
- Humidity measurement range/error: 10 ~ 90 %RH / ±2%
- Working temperature: 32°F to 104°F (0°C to 40°C )
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000