- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- On-chip display RA
- DPI 111
- Interface UART
- Baud rate with Arduino 230400
Add to Wishlist
Add to Wishlist
- Material: Aluminum alloy
- Colour: Green
- Composition: above case+below case+hanging bracket+assembly screws
- Compatible with: Raspberry Pi 3 Model B and B+
Add to Wishlist
Add to Wishlist
- Material: ABS
- Dimensions mm (LxWxH): 9.5 x 6.5 x 3
- Weight: 39g
- Color: Black
- SD Card Slot: Yes
Add to Wishlist
Add to Wishlist
- Sleek aluminum alloy enclosure
- Plastic base for excellent Wi-Fi signal strength
- Easy installation with magnetic removable top
- Easily accessible GPIO with color-coded pinouts
Add to Wishlist
Add to Wishlist
- Design with good heat dissipation, do not have to install the cooling fan or heatsink.
- This case is constructed out of high-quality aluminium material.
- Suitable for raspberry pi 4 model b motherboard only
- Easy to install and insert the micro sd card
Add to Wishlist
Add to Wishlist
- Aluminum Material
- Adopting Aluminum Material, With Oxidation Sand-Blasting Surface
- Compatible With Certain Raspberry Pi HATs
Add to Wishlist
Add to Wishlist
1. Built-in dual-fan cooling
2. Aluminum chassis for easier heat dissipation
3. Cooling Protective Shell for Raspberry Pi 4B Black
Add to Wishlist
Add to Wishlist
- Easy three-piece installation design.
- Easy fitment of Pi board.
- Case color: Black.
- Rubber pad grip at the bottom.
- Precise access to all port and cable strips.
- Injection Molded Construction.
Add to Wishlist
Add to Wishlist
- Easy two-piece installation design
- Hole for mounting the pi inside the case
- Rubber pad grip at the bottom
- Precise access to all port and status LEDs with Symbols
- Raspberry LOGO on Top
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Display size: 84.8mm × 63.6mm
- Dot pitch: 0.212 × 0.212
- Resolution: 400 × 300
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000