4.2inch E-Ink Raw display

SKU: 766318
In Stock

3,669.00

  1. Operating voltage: 3.3V
  2. Interface: 3-wire SPI, 4-wire SPI
  3. Display size: 84.8mm × 63.6mm
  4. Dot pitch: 0.212 × 0.212
  5. Resolution: 400 × 300
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Category:

Description

This is an E-Ink raw display, 4.2inch, 400×300 resolution, with an embedded controller, communicating via SPI interface. Due to the advantages like ultra-low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instruments, and so on.

Note: This product comes with the display only. A display module is not included in the package.


Features

  1. No backlight keeps displaying last content for a long time even when power down
  2. Ultra low power consumption, basically power is only required for refreshing
  3. Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Package Includes:

1 x 4.2inch E-Ink raw display

Additional information

Operating voltage

3.3V

Interface

3-wire SPI, 4-wire SPI

Resolution

400 × 300

Display size(mm)

84.8× 63.6

Dot pitch

0.212 × 0.212

Display color

black, white

Full refresh time

4s

Refresh power

26.4mW

Standby power

<0.017mW

Viewing angle

>170°

Quick Comparison

Settings4.2inch E-Ink Raw display removeWaveshare 1.54inch NFC-Powered e-Paper No Battery Wireless Powering & Data Transfer removeWaveshare 3inch E-Paper Display Module (G), 400×168, Red/Yellow/Black/White removeSeeedStudio Grove Triple Color EInk Display 1.54” removeWaveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case removeWaveshare 1.64inch square E-Paper (G) Display 168×168 Red/Yellow/Black/White remove
Name4.2inch E-Ink Raw display removeWaveshare 1.54inch NFC-Powered e-Paper No Battery Wireless Powering & Data Transfer removeWaveshare 3inch E-Paper Display Module (G), 400×168, Red/Yellow/Black/White removeSeeedStudio Grove Triple Color EInk Display 1.54” removeWaveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case removeWaveshare 1.64inch square E-Paper (G) Display 168×168 Red/Yellow/Black/White remove
Image
SKU76631812190501347911113521911133481347905
Rating
Price3,669.002,749.002,229.002,199.001,999.001,249.00
Stock
In Stock
In Stock
In Stock
Out of stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockOut of stockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Description
  1. Operating voltage: 3.3V
  2. Interface: 3-wire SPI, 4-wire SPI
  3. Display size: 84.8mm × 63.6mm
  4. Dot pitch: 0.212 × 0.212
  5. Resolution: 400 × 300
  1. Power: NFC-powered
  2. Resolution: 200×200
  3. Dot pitch: 0.138 × 0.138
  4. Refresh time: 8s (Transmit time is not included)
  5. Display color: black, white, red
  6. Viewing angle: >170°
  1. Brand: Waveshare
  2. Product: 3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White
  3. Operating Voltage: 3.3V/5V
  4. Display Color: Red/Yellow/Black/White
  5. Interface: 3-wire SPI, 4-wire SPI

 

  1. Supply voltage 3.3V / 5V
  2. Operating temperature 0~40℃
  3. Storage temperature -25~60℃
  4. Humidity range 40~70%RH
  5. Display resolution 152(H) x 152(V) pixel
  1. Operating Voltage: 3.3V
  2. Gray Scale: 2
  3. Interface: 3-wire SPI, 4-wire
  4. SPI Partial Refresh Time: 0.3s
  5. Full Refresh Time: 2s
  6. Refresh Power:  26.4mW(Typ.)
  7. Dot Pitch : 0.194 x0.194mm
  1. Brand: Waveshare
  2. Product: 1.64inch square E-Paper (G) raw display, 168 × 168
  3. Operating Voltage: 3.3V
  4. Display Color: Red/Yellow/Black/White
  5. Interface: 3-wire SPI, 4-wire SPI
Content

This is an E-Ink raw display, 4.2inch, 400×300 resolution, with an embedded controller, communicating via SPI interface. Due to the advantages like ultra-low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instruments, and so on.

Note: This product comes with the display only. A display module is not included in the package.


Features

  1. No backlight keeps displaying last content for a long time even when power down
  2. Ultra low power consumption, basically power is only required for refreshing
  3. Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Package Includes:

1 x 4.2inch E-Ink raw display

 

Hey geeks, here is one more revolutionary product in the Waveshare E-paper display range. This is an NFC-powered 1.54inch e-Paper Module, with a 200×200 resolution that takes data like images, text, or any craft you want to show on your display wirelessly via NFC. It can be done through the mobile phone itself via android and ios app.

Click here and Scan the QR code and get the latest NFC app for your android phone


Useful link:

To use this module, please follow this tutorial.


1.54″ Passive NFC-Powered E-Paper

Rounded Metal Border, Nice Looking, Stunning Quality

Red / Black / White Three-color Displaying

 

 

 

Wireless NFC-Powered Display Refreshing

Passive NFC Solution, No Battery Required, No Messy Wiring

 

 

 

How It Works

Wireless Powering & Data Transfer

To Refresh The Display Content, Use A Smart Phone With NFC Function, Or An NFC Reader, Close To The E-Paper, It’ll Be Done In A Few Seconds

 

A Born Hanging Ornament

Features Corner Hang Hole, Ideal For Handbag Decoration, Key Fob, Etc.

 

 

 

Application Examples

Suitable For Smartphone / Key Fob, Contact Card QR Code, Hanging Ornament…

 

 

 

Outline Dimensions

 

The best part is as it is an e-paper display this display doesn’t require any power to operate

if you don’t have NFC enabled phone, no need to worry. You can do it via NFC writer.


Features: 

  1. No backlight required, e-Paper keep displaying the last content for a long time without power
  2. No power adapter required
  3. You can modify the display content by smartphone
  4. Compare with ABS case
  5. App is provided

Package Includes:

1 x 1.54inch NFC-Powered e-Paper (B)

3-inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in the clear fluid will move to the sides of the microcapsule when an electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light requires no backlight and features nearly up to 180° viewing angle. It is usually used as an e-reader due to its paper-like effect.


Features:

  1. No backlight keeps displaying last content for a long time even when power down
  2. Ultra-low power consumption, basically power is only required for refreshing
  3. SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  4. Onboard voltage translator, compatible with 3.3V/5V MCUs
  5. Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)

Package Includes:

1 x 3inch e-Paper Module (G)

1 x PH2.0 20cm 8Pin

The Grove – Triple Color E-Ink Display 1.54” is a screen that can still be displayed after power off, we call it E-Paper(electronic paper) or E-Ink. The display is a TFT active matrix electrophoretic display, with an interface and a reference system design. The 1.54-inch active area contains 152×152 pixels and has 1-bit white/black and 1-bit read full display capabilities.

Due to the advantages like ultra-low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf labels, industrial instruments, and so on.

Getting started with SeeedStudio Grove Triple Color E-Ink Display 1.54”


Features: 

  1. High contrast
  2. High reflectance
  3. Ultra-wide viewing angle
  4. Ultra-low power consumption
  5. On-chip display RAM
  6. DPI 140

Package Includes :

1 x SeeedStudio Grove Triple Color E-Ink Display 1.54”
1 x JST cable

This is an E-Ink display for Raspberry Pi, 2.13inch, 250×122 resolution, with an embedded controller, communicating via SPI interface, supports the black, and white color display.

There is no backlight so it can keep displaying the last content for a long time even when the power is down. As these displays have no backlight panels and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen, it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight,  Basically, power to the display is only required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc… SPI interface can be used.


Useful link:

To do Hardware and Software setup, please follow this tutorial.


Features:

  1. 2.13″ capacitive touch e-Paper display, 5-point touch, 250×122 pixels
  2. Supports waken up by user-defined gesture
  3. No backlight keeps displaying last content for a long time even when power down
  4. Ultra-low power consumption, basically power is only required for refreshing
  5. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  6. Comes with development resources and manual (examples for Raspberry Pi)

Specifications:

  1. Operating Voltage: 3.3V
  2. Gray Scale: 2
  3. Interface: 3-wire SPI, 4-wire
  4. SPI Partial Refresh Time: 0.3s
  5. Full Refresh Time: 2s
  6. Refresh Power:  26.4mW(Typ.)
  7. Dot Pitch : 0.194 x0.194mm
  8. Standby Current: <0.01uA (almost none)
  9. Viewing  Angle: >170°
  10. Display Color: black, white
  11. Touch Point: 5 (max)

Package Includes:

1 x Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case

1.64inch Square E-Paper (G) Raw Display, 168 × 168, Red/Yellow/Black/White E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in the clear fluid will move to sides of microcapsule when an electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light requires no backlight and features nearly up to 180° viewing angle. It is usually used as an e-reader due to its paper-like effect.


Useful link:

To do Hardware and Software setup, please follow this tutorial.


Features:

  1. No backlight keeps displaying last content for a long time even when power down
  2. Ultra-low power consumption, basically power is only required for refreshing
  3. Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)

Package Includes:

1 x Waveshare 1.64inch square E-Paper (G) Display

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Operating voltage

3.3V

Interface

3-wire SPI, 4-wire SPI

Resolution

400 × 300

Display size(mm)

84.8× 63.6

Dot pitch

0.212 × 0.212

Display color

black, white

Full refresh time

4s

Refresh power

26.4mW

Standby power

<0.017mW

Viewing angle

>170°

Power Supply Option

Wireless

Display Color

Red / Black / White

Dot Pitch

0.138 × 0.138

Display Resolution

200× 200

Viewing Angle

>170°

Grey Scale

2

Full Refresh Time (s)

8s (data transfer time is not included)

Display Size (inch)

27.60mm × 27.60mm

Outline dimension (mm)

47.84mm × 41.28mm

Operating Voltage

3.3V/5V

Display Color

Red/Yellow/Black/White

Interface

3-wire SPI, 4-wire SPI

Grey Scale

2

Outline Dimensions

88.5 × 41mm

Full Refresh Time

12s

Display Size

70.4 × 29.568mm

Refresh Power

<60mW (typ.)

Dot Pitch

0.176 × 0.176mm

Standby  Current

<0.01uA (almost none)

Resolution

400×168 pixels

Viewing Angle

>170°

Operating Voltage (VDC)

3.3 ~ 5

Operating Temperature (°C)

0 to 40

Display Resolution

152(H) x 152(V) pixel

UART Baudrate

230400

Interface

UART

Operating Voltage

3.3V

Display Color

Red/Yellow/Black/White

Interface

3-wire SPI, 4-wire SPI

Grey Scale

2

Outline Dimensions

45.5 × 36.4 × 0.91mm

Full  Refresh Time

12s

Display Size

29.568 × 29.568mm

Refresh Power

<57mW (typ.)

Dot Pitch

0.176 × 0.176mm

Stand Current

<0.01uA (almost none)

Resolution

168×168 pixels

Viewing Angle

>170°