Shop
LattePanda Delta 432 (Win10 Pro Activated) with Case & Streaming Cable & Touch Display
Out of stock
Creality -Ender-3 S1 Pro 3D Printer
Out of stock
| Product Type |
3D printer |
|---|---|
| Model |
Ender-3 S1 Pro |
| Brand |
Creality |
| Modeling techonalogy |
FDM |
| Build Volume |
220 x 220 x 270 mm |
| Printing speed |
Max 150 mm/s |
| Printing precision |
±0.1mm |
| Layer Hight |
0.05-0.4 mm |
| Filament Diameter |
1.75 mm |
| Nozzle quantity |
1 |
| Nozzle Diameter |
0.4 mm |
| Extruder |
"Sprite" Full metal dual gear direct extruder with 1:3.5 gearing |
| Slicing software |
Creality slicing /Cura/Repetiar-Host/Simplify 3D |
| Build Surface |
Spring steel PEI Magnetic build plate |
| Supported Filaments |
PLA ,ABS ,WOOD ,TPU ,PETG ,PA |
| Nozzle temperature |
up to 300°C |
| Heat bed temperature |
up to 110°C |
| Leveling mode |
CR touch automatic leveling |
| Display |
4.3-inch color touch screen |
| Motherboard |
32 bit silence motherboard |
| Rated Voltage |
100-120V ,220-240V ,50/60V |
| Rated Power |
350W/24 |
| Data Transmission Method |
Type-c USB/SSD Card |
| 3D File format |
stl/obj/.gcode(after slicing) |
| Extrusion force |
80 N |
Holybro Pixhawk 6C PM07 M8N
Out of stock
SenseCAP M1 LoRaWAN Indoor Gateway(4G RAM+SX1302) – EU868
Out of stock
| Processor |
Raspberry Pi 4 (Broadcom BCM2711 ,Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) |
|---|---|
| RAM |
4GB |
| Storage |
64GB MicroSD Card |
| Frequency |
US915 Version: 902MHz ~ 928MHz – For USA and Canada |
| Sensitivity |
125dBm @125KHz/SF7 -139dBm @125KHz/SF12 |
| TX Power |
Up to 26 dBm |
| Antenna Gain |
US915: 2.6 dBi |
| Antenna Impedance |
50 Ohm |
| Antenna Radiation Pattern |
Omni-Directional |
| Connectivity |
Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless Bluetooth 5.0 ,BLE LoRaWAN Supports Class A ,C |
| Input Voltage |
DC 5V – 3A |
| Interfaces |
USB Type-C (Power Supply) * 1 Ethernet RJ45 * 1 RP-SMA Female Antenna Connector* 1 |
| Operating Temperature |
0°C to 50°C |
| Relative Humidity |
0% – 90% (non-condensing) |
| Heat Dissipation |
Aluminum enclosure ,a heatsink ,and a cooling fan |
| IP Grade |
IP20 |
| GTIN |
110991634 |
Hex Pixhawk cube + Flight Controller Autopilot
Out of stock
| Main Processor |
STM32H757 Dual Core M7 + M4 |
|---|---|
| Coprocessor |
STM32Fl00 |
| Supported RC signals |
PPM/SBUS/DSM |
| Power redundancy |
Triple redundancy |
| Sensors |
Triple IMU System |
| Sensors details |
IMUl(lsolated) ICM42688 IMU2(1solated) ICM20948 or ICM42688 IMU3(Fixed) ICM20649 or ICM45686 MS5611x 2(Baro) |
| Supported firmware Ardupilot |
PX4 ,and Hionos 00-178C |
| Supported vehicle type |
Fixed-wing plane Multicopters Helicopter VTOL-plane Rover/boat/submarine |
| Weight (gm) |
73 |
| Chassis Material |
CNCAluminum Alloy(cube) +ABS Molding(Carrier Board) |
| Cube Size (mm) |
38.4 x 38.4 x 22 |
| Carrier Board Size (mm) |
94 x 44.3 x 7.3 |
| Operating Temperature |
-10+55° IMU with temperature control |
| PWM I/Os |
14 |
| GPS/Serial interfaces |
4 |
| Debug interface |
2 |
| I2C interface |
2 |
| CAN FD interface |
2 |
Holybro Pixhawk 6C PM02 M8N combo kit
Out of stock
Arduino Portenta Machine Control Unit
Out of stock
| Processor |
STM32H747XI dual Cortex®-M7+M4 32 bit low power Arm MCU (Portenta H7) |
|---|---|
| Input |
8 digital 24Vdc 2 channels encoder readings 3 Analog for PT100/J/K temperature probes (3-wire cable with compensation ) 3 Analog input (4-20mA/ 0-10V/NTC 10K) |
| Output |
8 digital 24Vdc up to 0 ,5A (short circuit protection) 4 analog 0-10V (up to 20mA output per channel) |
| Other I/O |
12 programmable digital I/O (24V logic) |
| Communication Protocols |
CAN-BUS Programmable Serial port 232/422/485 |
| Connectivity |
Ethernet USB Programming Port Wi-Fi Bluetooth Low Energy |
| Memory |
16 MB onboard Flash memory 8MB SDRAM |
| Power |
24V DC +/- 20% |
| Connector Type |
Push-in terminals for fast connection |
| Operating Temperature |
-40° C to +85° C (-40° F to 185°F) |
| Length (mm) |
170 |
| Width (mm) |
90 |
| Height (mm) |
50 |
| Weight (gm) |
186 |
High Quality Ultra Flexible 8AWG Silicone Wire 100 m (Black)
Out of stock
High Quality Ultra Flexible 8AWG Silicone Wire 100 m (Blue)
Out of stock
High Quality Ultra Flexible 8AWG Silicone Wire 100 m (Green)
Out of stock
High Quality Ultra Flexible 8AWG Silicone Wire 100 m (Red)
Out of stock
High Quality Ultra Flexible 8AWG Silicone Wire 100 m (White)
Out of stock