Shop
Yihua 950 150W High Frequency Industrial Precision Professional Soldering Iron Station
Out of stock
MICROCHIP Evaluation Board, SAMA5D4 Xplained Ultra, Cortex-A5, SAMA5D4 MPU
Out of stock
| Microprocessor |
SAMA5D44 Cortex-A5 |
|---|---|
| Memory |
1 EEPROM with a unique MAC address and serial number ,512MBytes DDR2 memory ,512MBytes NAND Flash memory |
| Connectors |
LCD connectors One HDMI connector Three USB connectors (2 Host and 1 Device) |
| Ethernet |
10/100 Ethernet MAC with PHY and connector |
| MicroSD slots |
1x SD/eMMC 1x MicroSD slots |
| Compatible |
Arduino R3 Shield and Xplained Wing compatible expansions headers |
E3D Chimera+ Kit Dual nozzle HotEnd (24V with Air-Cooling System)
Out of stock
SKYRC T1000 Maestro 450W 20A AC/DC Dual Balance Charger
Out of stock
Waveshare 11.6inch Capacitive Touch Screen LCD with Case 1920×1080 HDMI IPS Various Systems Support
Out of stock
| Size |
11.6" |
|---|---|
| Resolution |
1920×1080 |
| Display Port |
HDMI / VGA |
| Display Panel |
IPS |
| Viewing Angle |
178° |
| Touch Type |
Capacitive |
| TouchPoints |
10-Points |
| Touch Port |
USB |
| Touch Panel |
Tech Fully Laminated |
| OSD |
Menu Brightness/Contrast |
| Sound |
Hi-Fi Speaker |
| Audio Output |
3.5mm Jack |
| Gaming |
Xbox360/PS4/Switch |
| Enclosure |
ABS |
| Certification |
CE |
Holybro kakute F7 & amp- tekko 32 Blheli32 4 in 1 ESC stack
Out of stock
T Motor NS24 x 7.2-10mm Hole Prop-2PCS/PAIR
Out of stock
ODROID-H3 Single Board Computer
Out of stock
| Model |
ODROID-H3 |
|---|---|
| Power |
DC jack : outer (negative) diameter 5.5mm ,inner(positive) diameter 2.1mm DC 14V ~ 20V (up to 60W) DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs DC 19V/7A power adapter is recommended if you two 3.5” HDDs together Power consumption: IDLE: ≃1..9W CPU Stress: ≃15W CPU+GPU Stress: ≃18W Power-off: ≃0.25W Suspend: ≃0.6W |
| Processor |
Intel Celeron N5105 Processor (10nm ,Quad-Core ,TDP 10W) H3+(N6005) : up to 3.3Ghz 4MB L2 Cache Intel UHD Graphics (24/32 EU up to 900MHz) |
| Memory |
2 x DDR4 1.2V SO-DIMM slots Dual Channel ,up to 2933 MT/s (DDR4-PC23400) Max memory capacity 64GB DDR3/DDR5 is not supported |
| Storage |
1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at the Hardkernel store 2 x SATA3 6Gbps 1 x M.2 slot (PCIe 3.0 x 4 ,supports NGFF-2280 cards) M.2 SATA SSD is not supported |
| Networking |
2 x GbE LAN ports (RJ45 ,supports 10/100/1000/2500 Mbps) Realtek RTL8125B Supports Wake-On-Lan LED indicators (Green: Link ,Amber: Traffic) |
| Audio |
1 x Audio out (3.5mm jack) 1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC1200 ,HDA codec) * HDMI & DP have audio output too. |
| Video |
1 x DisplayPort 1.2 (up to 4K@60Hz) 1 x HDMI 2.0 (up to 4K@60Hz) Dual simultaneous display support |
| External I/O |
2 x USB 3.0 Host ports 2 x USB 2.0 Host ports 1 x Peripheral Expansion Header (24-pin ,2.54mm pitch) 1 x DC 5V ,1 x DC 3.3V ,5 x GND 1 x UART (TXD/RXD/RTS/CTS) 2 x I2C (SCL/SDA) 1 x External Power Button HDMI CEC ,5VA+ 3 x USB 2.0 All 3.3V I/O signal level |
| Other features |
Passive Heatsink BIOS Backup Battery Maintains system time and BIOS settings Power Button Reset Button System LEDs Indicators: – Red (PWR) – Solid light when DC power is supplied – Blue (left ,SLEEP) – turns off only when the system enters into suspend mode – Blue (right ,PMIC) – turns on only when the major power rails are working – Amber (SATA) – Flashes when SATA data transfers – Green (NVMe) – Flashes when NVMe data transfers Active Cooling Fan Connector (12V 4-pin ,PWM input + TACHO output) – Active Cooling Fan is optional – Connector (4-pin ,2.54mm pitch) |
| Form Factor |
110 x 110 x 47 mm Approx. |
Chipsee EPC-CM4-70 Industrial embedded Raspberry Pi Compute Module 4 compatible 7 Inch PC
Out of stock
DFRobot Gravity Lab Grade Analog Dissolved Oxygen Sensor / Meter Kit For Arduino
Out of stock
Lemon 10000mAh 6S 25C/50C Lithium Polymer Battery Pack
Out of stock
| Model No. |
10000mAh 6S 25C |
|---|---|
| Connecting Mode |
6S-1P |
| Connector Type |
XT90-S |
| Nominal Capacity (mAh) |
10000mAh @ 0.2C |
| Minimum capacity |
9702mAh @ 0.2C |
| Nominal Voltage (V) |
22.2V（Cell 3.7V） |
| Charging time |
Rapid charge：1.5 hours(10A) ,Standard Charging：3hours(5A) |
| High Rate Discharge |
≥9.2min Standard Charge/rest 5min discharge at 70A to 18V. |
| Internal Impedance |
≤11.5mΩ |
| Length (mm) |
180mm |
| Width (mm) |
67.5mm |
| Height (mm) |
58.2 |
| Weight (g) |
1300 |
Jetson Mate – NVIDIA Jetson Nano/NX Carrier Board for GPU Cluster and Server
Out of stock