-
Fast ShippingGet the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹1,857.73 (Including tax)
Discount per Bulk Quantity
| Quantity | Discount | Price |
|---|---|---|
| 5 - 10 | 5% | ₹1,764.85 (Including tax) |
| 11 - 20 | 8% | ₹1,709.12 (Including tax) |
| 21 - 40 | 10% | ₹1,671.96 (Including tax) |
| 41 - 100 | 12% | ₹1,634.81 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
This 2-Channel I2C DAC module can output a voltage of 0-10V, which is a standard driver in industrial applications. It can be widely used with most 0-10V devices on markets such as light controllers, inverters, valves, pumps, etc, by Arduino programming.
Besides, this module supports 8 different I2C addresses, which can be changed using the on-board DIP switch, allowing a cascade of 16 devices.
1 x DFRobot 2-Channel I2C DAC Module (0-10V)
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
Out of stock
Out of stock
| Operating voltage |
3.3V / 5V |
|---|---|
| Connector |
DB9 male |
| CH343G |
up to 2 Mbps (not full band) |
| Baud rate FT232RL |
300bps ~ 2 Mbps |
| Baud rate |
FT232RL: 300bps ~ 921600 bps |
| Connector Screw |
terminal |
| Direction Control |
Hardware automatically discriminates and controls the direction of data transmission |
| Protection |
600W lightningproof and surge-suppress ,15KV ESD protection (reserved 120R balancing resistor solder pads |
| Transmission mode |
Point-to-multipoints (up to 32 nodes ,it is recommended to use repeaters for 16 nodes or more) |
| Pins |
TXD ,RXD ,GND ,5V |
Out of stock
| CM4 socket |
suitable for all variants of Compute Module 4 |
|---|---|
| USB |
USB 2.0 Type A |
| Connector |
Isolated RS485 ,Power screw terminal |
| Camera |
MIPI CSI-2 port (15pin 1.0mm FPC connector) |
| Video |
HDMI port ,supports 4K 30fps output |
| Storage |
Micro-SD card socket for Compute Module 4 Lite (without eMMC) variants |
| Fan Header |
Allows speed adjustment 5V |
| Indicator |
Power indicator ,CM4 status indicator |
| Power input |
7-36V |
Out of stock
| Run voltage |
DC5-36V |
|---|---|
| Run temp |
40℃-85℃ |
| Baudrate |
300 ~ 460800 bps |
| Storage temp |
40℃-125℃ |
| Safety |
WPA-PSK/WPA2-PSK |
| Wireless standard |
802.11 b/g/n |
| Frequency range |
2.412GHz-2 .484GHz |
| Communication interface |
RS485 ,screw terminal |
| Transmitting power |
– 802.11b: +19dBm (11Mbps) – 802.11g: +18dBm (54Mbps) – 802.11n: +17dBm (HT20 ,MCS7); +17dBm (HT40 ,MCS7 |
| Receiving sensitivity |
– 802.11b: -89dBm (11Mbps) – 802.11g: -81dBm (54Mbps) – 802.11n: -73dBm (HT20 ,MCS7); -71dBm (HT40 ,MCS7) |
| Operating mode |
Transparent transmission ,serial command ,HTTPD Client ,Modbus TCP to Modbus RTU |
| Dimensions |
L × W × H: 109.66 × 28 × 64.71 mm |
| Weight |
157g |
Out of stock
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.