-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹11,438.15 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹10,866.24 (Including tax) |
11 - 20 | 8% | ₹10,523.10 (Including tax) |
21 - 40 | 10% | ₹10,294.34 (Including tax) |
41 - 100 | 12% | ₹10,065.57 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
DFRobot Gravity: analog electrical conductivity sensor/meter(K=10) is particularly used to measure the high electrical conductivity liquid, such as seawater, concentrated brine, etc. The measurement range is up to 100ms/cm. This product is suitable for the water quality application of mariculture, for example, marine fisheries, marine aquariums. you may also check liquid sensor selection guide to get better familiar with our liquid sensorÂ
It supports 3~5v wide voltage input and is compatible with 5V and 3.3V main control boards, such as arduino and raspberry pi. The excitation source adopts an AC signal, which effectively reduces the polarization effect, improves the precision, and prolongs the life of the probe; The software library uses a single-point calibration method, and can automatically identify a standard buffer solution, so simple and convenient.
1 x Electrical Conductivity Probe(K=10, Laboratory Grade)
1 x Signal Conversion Board
4 x Standard Buffer Solution 12.88ms/cm
1 x Gravity Analog Sensor Cable
2 x Waterproof Gasket
1 x Screw Cap for BNC Connector
4 x M3 x 10 nylon pillar
Supply Voltage |
3.0~5.0V |
---|---|
Output Voltage |
0~3.2V |
Probe Connector |
BNC |
Signal Connector |
PH2.0-3Pin |
Measurement Accuracy |
±5% F.S. |
Probe Type |
Laboratory Grade |
Cell Constant |
10±2 |
Support Detection Range |
10~100ms/cm |
Temperature Range |
0~40°C |
Board size |
42mm x 32mm/1.65in x 1.26in |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
Out of stock
Out of stock
Model |
Gravity: O2 Signal Conversion Board |
---|---|
Detection Gas |
Chlorine (CL2) |
Detection range |
0~10ppm |
Working Voltage |
3.3~5.5V DC |
Working Current |
<5mA |
Output Signal |
I2C ,UART (0~3V) ,analog voltage |
Compatibility |
Arduino ,ESP32 ,Raspberry pi |
Lifespan |
>2 years (in the air) |
Adapter Plate Size |
37 x 32mm |
Working Humidity Range |
15~90%RH (non-condensing) |
Working Temperature Range (°C) |
-20~50℃ |
Out of stock
Out of stock
Supply Voltage |
3.0~5.0V |
---|---|
Output Voltage |
0~3.4V |
Probe Connector |
BNC |
Probe Type |
Laboratory Grade |
Cell Constant |
1.0 |
Support Detection Range |
0~20ms/cm |
Recommended Detection Range |
1~15ms/cm |
Temperature Range |
0~40°C |
Probe Life |
>0.5 years (depending on the frequency of use) |
Cable Length |
100cm |
Signal Connector |
PH2.0-3Pin |
Measurement Accuracy |
±5% F.S |
Board size |
42mm x 32mm/1.65in x 1.26in |
Out of stock
Supply Voltage |
3.3~5.5V |
---|---|
Output Voltage |
0~3.0V |
Probe Connector |
BNC |
Signal Connector |
PH2.0-3P |
Measurement Accuracy |
±0.1 at 25℃ |
Probe Type |
Laboratory Grade |
Detection Range |
0~14 |
Temperature Range |
5~60°C |
Zero Point |
7±0.5 |
Response Time |
<2min |
Internal Resistance |
<250MΩ |
Probe Life |
>0.5 years (depending on the frequency of use) |
Dimension |
42mm x 32mm/1.66 x 1.26in |
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.