-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹286.33 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹272.02 (Including tax) |
11 - 20 | 8% | ₹263.42 (Including tax) |
21 - 40 | 10% | ₹257.69 (Including tax) |
41 - 100 | 12% | ₹251.97 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
A silicon microchip, housed in a plastic shell, sends an electrical charge to a small detection chamber that contains a CO sensor. This sensor can detect and measure CO concentration in the atmosphere. If the sensor detects high levels of CO, the microchip will trigger an alarm
Sensitive material of MQ-7B gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO at low temperature(heated by 1.5V).The sensor’s conductivity gets higher along with the CO gas concentration rising. At high temperature (heated by 5.0V),it cleans the other gases adsorbed at low
temperature. Users can convert the change of conductivity to correspond output signal of gas concentration through a simple circuit.
Applications:Â
It is widely used in domestic CO gas leakage alarm, industrial CO gas alarm and portable CO gas detector.
Note: For more Info Check User ManualÂ
1 x Winsen MQ-7B Carbon Monoxide Sensor
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
Detection Gas |
Hydrogen (H2) |
---|---|
Detection range |
0~1000ppm |
Working Voltage |
3.3~5.5V DC |
Working Current |
<5mA |
Output Signal |
I2C ,UART (0~3V) ,analog voltage |
Working Temperature |
-20~50℃ |
Working Humidity |
15~90%RH (non-condensing) |
Storage Temperature |
-20~50℃ |
Communication Protocol |
I2C ,UART and analog |
Compatibility |
Arduino ,ESP32 ,Raspberry pi |
Storage Humidity |
15~90%RH (non-condensing) |
Lifespan |
>2 years (in the air) |
Adapter Plate Size |
37 x 32mm |
Out of stock
Out of stock
Out of stock
Out of stock
Heater voltage |
5.0±0.2V DC |
---|---|
Circuit Voltage |
5.0±0.2V DC |
Heater Current |
56±5mA |
Minimum impedance between Pin#2,3 and GND |
2.5MΩ |
Operating conditions |
0Ëš~40ËšC ,30~95%RH |
Temperature differential between inside and outside detector casing |
≤10˚C max. (see NOTE 1) |
Test gas conditions |
1250±100ppm iso-butane in air at 20˚±2˚C ,65±5%RH |
Circuit conditions |
VH=5.0±0.05V DC VC=5.0±0.05V DC |
Out of stock
Model No. |
TGS2611-C00 |
---|---|
Sensing Principle |
MOS type |
Standard Package |
TO-5 metal can |
Target Gases |
Methane ,Natural Gas |
Heater Voltage |
5.0±0.2V DC |
Circuit Voltage |
5.0±0.2V DC |
Load Resistance |
variable 0.45kΩ min. |
Heater Resistance |
approx 59Ω at room temp. |
Heater Current |
56±5mA |
Heater power consumption |
280mW±25mW |
Sensor Resistance |
0.68~6.8kΩ in 5000ppm methane |
Test Gas Conditions |
Methane in air at 20±2˚C ,65±5%RH |
Out of stock
Model number |
TGS5141-P00 |
---|---|
Output current in CO |
1.2~3.2nA/ppm |
Target Gases |
Carbon monoxide |
Typical detection range |
0 ~ 5 ,000ppm |
Baseline offset(*1) |
<±10ppm equivalent |
Operating temperature |
10ËšC ~ +50ËšC (continuous) -20ËšC ~ +60ËšC (intermittent) |
Operating humidity |
10 ~ 95%RH (no condensation) |
Response time (T90) |
within 60 seconds |
Storage conditions |
-10ËšC ~ +50ËšC (continuous) -20ËšC ~ +60ËšC (intermittent |
Standard test conditions |
20±2˚C ,40±10%RH |
Weight |
approx. 2.5g |
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.