Wemqs WiFi and Bluetooth Battery ESP32 Development Board With 18650 Lithium Battery Shiel

15 People watching this product now!

SKU: rz24316908 Category: Development Board/Kit

Description

ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications.

When you do some ESP32 projects you must add a power bank to provide the power. This tiny board could solve such problems. An LG 3000mAH 18650 battery (NOT include) could make ESP32 run 17 hours or more.

Features:

High performance-price ratio
Small volume, easily embedded to other products
Strong function with support LWIP protocol, Freertos
Supporting three modes: AP, STA, and AP+STA
Supporting Lua program, easily to develop
18650 charging system integrated.
Ultra-low power consumption
Indicate LED inside(Green means full& Red means charging)
Charging and working could be at the same time.
1 Switch could control the power.
1 extra LED could be programmed(Connected with GPIO16[D0])
0.5A charging current
1A output
Overcharge protection
Over-discharge protection
Full ESP32 pins break out

Package Includes:

1 x ESP32 Development Board With 18650 Lithium Battery Shield

Additional information

Operating Voltage	2.2 to 3.6VDC
32 GPIO	ADC(16) , SPI(2) , I2C(1) , UART(1) , PWM(32) , SDIO(50 Mhz)
Memory	520 KB SRAM 16 MB Flash
Network	802.11BGN HT40 WiFi Transceiver (-98 dBm minimum sensitivity)
Max Data Transfer Rate	150 Mbps
Operating Temperature	-40°C to 125°C
Dimensions:	29.22 x 98.58 x 17.22 mm

Reviews (0)

Rated 0 out of 5

0 reviews

Rated 5 out of 5

Rated 4 out of 5

Rated 3 out of 5

Rated 2 out of 5

Rated 1 out of 5

Reviews

Clear filters

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery

Shipping and Delivery Policy

1. Shipping Process:

Orders are processed within 1-2 business days after payment confirmation.
Delivery time varies based on location and selected shipping method, typically ranging between 3-7 business days.
We partner with trusted courier services to ensure timely and safe delivery.

2. Shipping Charges:

Shipping charges are calculated at checkout based on the delivery location and package weight.
Free shipping may be available for orders above a specified amount, as mentioned on our website.

3. Order Tracking:

Once your order is shipped, you will receive a tracking ID via email or SMS to monitor the shipment status.

4. Delivery Address:

Please provide a complete and accurate delivery address to avoid delays.
We are not responsible for delivery failures due to incorrect or incomplete address details provided by the customer.

5. Delivery Issues:

If a package is delayed, lost, or damaged during transit, please contact our support team immediately.
Claims for lost or damaged items must be reported within 48 hours of delivery.

6. No Return Policy for Opened/Soldered Products:

We do not accept returns for products that have been opened, used, or soldered.
Ensure you verify product compatibility before purchase, as returns will only be accepted for unopened and unused items in their original packaging.

7. Refund Policy:

Refunds will be issued only for canceled orders before shipment or wrong/damaged items received (subject to investigation).
No refunds or replacements for products that have been tampered with, soldered, or physically damaged by the customer.

DFRobot Terminal Block Board for FireBeetle 2 ESP32-E IoT Microcontroller

Out of stock

₹2,446.83 – ₹2,780.49 (Including tax)

SKU: rz2439330

External Voltage Input	7-24V
Screen Port	GDI
5V Port	3
3.3V Port	3
GND Port	6
Digital Port	12
Analog Port	5
I2C	3
SPI	1
Port Indicator	34
Port Indicator Color	blue , red
Default ON Port Indicator	5V , 3.3V , D0 , D1 , D5 , D6 , A4 , RST

EDATEC CM4 Media Baseboard CM4104000 4GB DDR,120G SSD WiFi/Bluetooth Antenna Silver Color CNC Aluminum Case 8MP Camera

Out of stock

₹26,509.15 – ₹30,124.05 (Including tax)

SKU: rz2436822

Processor	Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz H.265 (HEVC) (up to 4Kp60 decode) , H.264 (up to 1080p60 decode , 1080p30 encode) OpenGL ES 3.0 graphics
Memory	4GB LPDDR4-3200 SDRAM
Storage	Support boot from SD Card( Capacity can be chosen from 32GB~256GB) Support boot from SSD hard disk driver(Capacity can be chosen from 120GB~1TB
Multimedia	8-megapixel camera (Optional ) 2 channel 1W stereo speakers 1-channel MEMS microphone Support headphone jack and external microphone 1 standard HDMI 4K high-definition output interface 1 channel Micro HDMI 4K high-definition output interface
Network and wireless	1 channel 10/100/1000M Ethernet 2.4G/5.8G dual-band WiFi , compatible with IEEE 802.11 b/g/n/ac Bluetooth BLE5.0 1 official Raspberry Pi external antenna 4G/LTE version optional (non-SSD hard disk version)
Interface	2 channels USB3.0 1 channel way USB2.0
Other	One-click switch turns on/off the system with power & status LED indication RTC built-in with a backup battery
Power Supply	USB Type C interface , 5V/3A DC input
Dimensions (L x W x H) mm	100 x 100 x 19
Weight	260g
Software Environment	Raspbian Desktop version pre-installed

EDATEC ED-CM4NANO10-0208-C baseboard WIFI Antenna Metal Case 2GB RAM and 8GB EMMC

Out of stock

₹15,522.89 – ₹17,639.65 (Including tax)

SKU: rz2436999

Model	ED-CM4NANO10-0208-C
Power supply	12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional
Camera and display	1 x CSI interface , support Raspberry Pi official 5M & 8M pixel camera module 1 x HDMI port 1 x DSI interface , support Raspberry Pi official display
Wired interface	1 x Support PoE power supply 10/100M/1000 Ethernet (requires official PoE HAT) 2 x USB3.0 (external) 1 x USB3.0 (built-in) 1 x USB2.0
Wireless communication	1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE WiFi/BLE external antenna and PCB antenna are optional
Storage	1 x microSD card holder (used to expand user data storage) Extensible interface: 1 x Raspberry Pi standard 40-pin connector 1 x Raspberry Pi standard 4-pin POE connector
Operating temperature	-25~60°C
Software Environment	Raspberry Pi Raspbian OS installed
Dimension	103 mm(L) x 62 mm(W) x 21.5mm(H)
Others	1 x RTC with a backup battery 1 x Red LED power indicator , 1 x Green LED status indication 1 x system reset button 1 x buzzer

EDATec ED CM4SEN baseboard with WIFI Antenna 4G Module Metal Case 1GB RAM and 8GB EMMC 1 1

EDATEC ED-CM4SEN baseboard with WIFI Antenna 4G Module Metal Case 1GB RAM and 8GB EMMC

Out of stock

₹22,687.85 – ₹25,781.65 (Including tax)

SKU: rz2436820

Industrial interface	4 x RS485 1 x RS232 1 x CAN 1 x RTC with a backup battery 1 x Red LED power indicator , 1 x Green LED status indication 1 x buzzer
Display	1 x Standard HDMI port 1 x HDMI by FPC cable 1 x DSI interface+1 x 5V@1.5A output , support Raspberry Pi official display
Wired interface	1 x 10/100M/1000 Ethernet 2 x USB2.0 (external) 1 x Micro USB2.0 (Inside the case , for programming)
Wireless communication	1 x 4G/LTE module 1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE Official Raspberry Pi WiFi/BLE external antenna
Storage	1 x microSD card holder (used to expand user data storage)
Expansion interface	1 x Mini PCI-e socket for PCIe Gen2 x1
Power supply	12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional
Operating temperature:	-25~60°C
Dimension (L x W x H)	103 x 73 x 32
Software Environment	Raspberry Pi Raspbian OS installed Support removing software upgrade

NanoPi Neo-LTS

Out of stock

₹2,793.15 – ₹3,174.03 (Including tax)