-
Fast ShippingGet the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹1,423.49 (Including tax)
Discount per Bulk Quantity
| Quantity | Discount | Price |
|---|---|---|
| 5 - 10 | 5% | ₹1,352.31 (Including tax) |
| 11 - 20 | 8% | ₹1,309.62 (Including tax) |
| 21 - 40 | 10% | ₹1,281.14 (Including tax) |
| 41 - 100 | 12% | ₹1,252.67 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
AO-03 oxygen sensor is widely used in the fields of mining, steel manufacturing, petrochemical and air monitoring. For example, it can be integrated into oxygen alarms in mines, air quality detectors and commercial air purification equipment The data provided in this document are valid at 20° C, 50% RH and 1013 mbar for 3 months after the manufactured date of sensor. Please strictly follow the instructions for operating the oxygen analyzer and replacing the oxygen sensor.
1 x Oxygen Sensor Model AO-03
| Model |
AO-03 |
|---|---|
| Product Type |
Oxygen Sensor |
| Output Signal |
0.1±0.03 mA in Air |
| Measurement Range |
1~25% Vol. O² |
| Response Time ( μS) |
<15 s (T90) |
| Operating Temperature Range |
0 to 50℃ |
| Operating Pressure Range: Atmospheric |
±20% |
| Operating Humidity Range |
5-99% RH non-condensing |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
| Model |
DFRobot Gravity NH3 Sensor |
|---|---|
| Detection Gas |
Ammonia (NH3) |
| Detection range |
0~100ppm |
| Working Voltage |
3.3~5.5V DC |
| Working Current |
<5mA |
| Output Signal |
I2C ,UART (0~3V) ,analog voltage |
| Compatibility |
Arduino ,ESP32 ,Raspberry pi |
| Lifespan |
>2 years (in the air) |
| Working Humidity Range |
15~90%RH (non-condensing) |
| Working Temperature Range (°C) |
-20~50℃ |
| Product Dimensions |
37 x 32mm |
Out of stock
Out of stock
| Heater voltage |
5.0±0.2V DC |
|---|---|
| Circuit Voltage |
5.0±0.2V DC |
| Heater Current |
56±5mA |
| Minimum impedance between Pin#2,3 and GND |
2.5MΩ |
| Operating conditions |
0˚~40˚C ,30~95%RH |
| Temperature differential between inside and outside detector casing |
≤10˚C max. (see NOTE 1) |
| Test gas conditions |
1250±100ppm iso-butane in air at 20˚±2˚C ,65±5%RH |
| Circuit conditions |
VH=5.0±0.05V DC VC=5.0±0.05V DC |
Out of stock
Out of stock
| Model No. |
TGS2610-C00 |
|---|---|
| Heater Current |
56±5mA |
| Heater Resistance |
approx 59Ω at room temp. |
| Heater Voltage |
5.0±0.2V DC |
| Load Resistance |
variable 0.45kΩ min |
| Sensing Principle |
MOS type |
| Circuit Voltage |
5.0±0.2V DC |
| Sensor Resistance |
1.0~10.0kΩ in 1800ppm iso-butane |
| Standard Package |
TO-5 metal can |
| Target Gases |
Butane ,LP gas |
| Test Gas Conditions |
iso-butane in air at 20±2˚C ,65±5%RH |
| Heater power consumption |
280mW VH = 5.0V DC |
Out of stock
| Model No. |
TGS5042-A00 |
|---|---|
| Target Gases |
Carbon monoxide |
| Typical detection range |
0 ~ 10 ,000ppm |
| Output current in CO |
1.2~2.4nA/ppm |
| Baseline offset(*1) |
<±10ppm equivalent |
| Operating & storage temperature (*2,*3) |
-5˚C ~ +55˚C |
| Operating humidity |
5 ~ 99%RH (no condensation) |
| Response time (T90) |
within 60 seconds |
| Standard test conditions |
20±2˚C ,40±10%RH |
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.