Raspberry Pi Hats
Waveshare 2-Channel Isolated CAN Expansion HAT for Raspberry Pi, Dual Chips Solution
Out of stock
Waveshare USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi, 3x USB, 1x Gigabit ETH, Driver-Free
Out of stock
Waveshare Power Management HAT for Raspberry Pi Supports charging And Power output at the same time, Embedded RTC and Multiple Protection Circuits
Out of stock
Waveshare Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections
Out of stock
Waveshare PN532 NFC HAT for Raspberry Pi, I2C / SPI / UART
Out of stock
| Model |
PN532 NFC |
|---|---|
| Product |
NFC HAT |
| Operating voltage |
3.3V/5V |
| Operating frequency |
13.56MHz |
| Communication interfaces |
I2C ,SPI ,UART (default) |
| Default baud-rate |
115200 bps |
| Product weight |
38g |
| Operating modes |
reader/writer mode supporting ISO/IEC 14443A / MIFARE scheme reader/writer mode supporting FeliCa scheme reader/writer mode supporting ISO/IEC 14443B scheme card operation mode supporting ISO 14443A / MIFARE scheme card operation mode supporting FeliCa scheme card operation mode supporting ISO/IEC18092 ,ECM340 point-to-point |
Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS
Out of stock
| Band |
GPS L1(1575.42Mhz) ,BD2 B1 (1561.098MHz) |
|---|---|
| Channels |
33 tracking ch ,99 acquisition ch ,210 PRN ch |
| Horizontal Position Accuracy |
<2.5mCEP |
| Time-To-First-Fix @-130dBm |
Cold starts: <15s Warm starts: <5s Hot starts: <1s |
| Sensitivity |
Acquisition: -148dBm Tracking: -163dBm Re-acquisition: -160dBm |
| Dynamic Performance |
Altitude (max): 18000m Velocity (max): 515m/s Acceleration (max): 4G |
| Communication Interface |
UART |
| UART Baudrate |
4800 ~ 115200bps |
| Update Rate |
1Hz (default) ,10Hz (max) |
| Protocols |
NMEA 0183 ,PMTK |
| Recommended Power Supply |
5V / 3.3V |
| Operating current |
13mA |
| Operating Temperature (°C) |
-40 to 85 |
| Length (mm) |
65 |
| Width (mm) |
30.5 |
| Height (mm) |
15 |
| Weight (gm) |
129 |
Waveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
Out of stock
| Brand |
Waveshare |
|---|---|
| Connector |
M.2 M KEY slot ,for connecting communication module or NVME SSD; Arduino compatible GPIO header |
| USB |
USB 2.0 Type A x 1 |
| Camera |
MIPI CSI-2 × 1 (15pin 1.0mm FPC connector) |
| Video |
HDMI x 1 ,supports 4K 30fps output |
| CM4 SOCKET |
suitable for all variants of Compute Module 4 |
| Storage |
Micro SD card socket for Compute Module 4 Lite (without eMMC) variants |
| Power Input |
5V |
| Dimensions |
73.58 x 53.34mm |
Waveshare Extended 4-Ch PCIe Gen 2 ×1 Expander Stable Performance Driver-Free
Out of stock
Raspberry PI IQ Audio DGAmp+
Out of stock
Waveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors
Out of stock
| Operating Voltage (VDC) |
3.3 |
|---|---|
| Logic Voltage |
3.3 |
| Accelerometer Features |
Resolution: 16-bit |
| Gyrometer Features |
Resolution: 16-bit |
| Magnetometer Features |
Resolution: 16-bit |
| Barometer Characteristics |
Resolution: 24-bit pressure data ,16-bit temperature data |
| Temperature And Humidity Sensor Characteristics |
Measurement Accuracy (humidity): ±2% rH |
| Color Recognition Sensor |
Resolution: 4 channel RGBC ,16 bits per channel |
| AD Conversion Chip |
Resolution: 16 bits |
UCTRONICS PoE HAT for Raspberry Pi , IEEE 802.3af- Compliant, 5V 2.5A Power Over Ethernet Board for Ras berr Pi 4B/3B+
Out of stock
Waveshare Nano Base Board (C) for Raspberry Pi Compute Module 4, Same Size as the CM4, Onboard 8MP Camera
Out of stock