Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS

SKU: 968482
In Stock

2,347.00

  1. Power supply voltage: 5V / 3.3V
  2. Operating current: 13mA
  3. Protocols: NMEA 0183, PMTK
  4. GNSS antenna connector
  5. CAT24C32: EEPROM
  6. RT9193-33: power manager
  7. Battery holder: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

This is a Raspberry Pi GNSS HAT that supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.

It is an easy way to enable global positioning function for your Raspberry Pi.

What’s on Board:

Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS

  1. L76B module
  2. CP2102: USB TO UART converter
  3. CAT24C32: EEPROM
  4. RT9193-33: power manager
  5. Backup mode wakeup button
  6. Standby switch
  7. Indicators:
    1. RXD/TXD: UART RX/TX indicator
    2. PPS: GPS status indicator
    3. PWR: power indicator
  8. Raspberry Pi GPIO connector: for connecting with Raspberry Pi
  9. USB TO UART port
  10. GNSS antenna connector
  11. Battery holder: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
  12. UART selection jumpers
    1. A: control the L76B through USB TO UART
    2. B: control the L76B through Raspberry Pi
    3. C: access Raspberry Pi through USB TO UART
Applications:
  1. Vehicle tracking
  2. Asset tracking
  3. Security system
  4. Industrial PDA
  5. GIS application

Features:

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  2. Supports Multi-GNSS systems: GPS, BDS, and QZSS
  3. EASY, self-track prediction technology, help quick positioning
  4. AlwaysLocate, intelligent controller of periodic mode for power saving
  5. Supports DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
  6. UART communication baudrate: 4800~115200bps (9600bps by default)
  7. Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
  8. 4x LEDs for indicating the module working status
  9. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Package Includes:

1 x L76X GPS HAT

1 x GPS External Antenna (B)

1 x USB type A plug to micro plug cable

1 x RPi screws pack (2pcs)

1 x 2x20PIN female header

Additional information

Band

GPS L1(1575.42Mhz), BD2 B1 (1561.098MHz)

Channels

33 tracking ch, 99 acquisition ch, 210 PRN ch

Horizontal Position Accuracy

<2.5mCEP

Time-To-First-Fix @-130dBm

Cold starts: <15s Warm starts: <5s Hot starts: <1s

Sensitivity

Acquisition: -148dBm Tracking: -163dBm Re-acquisition: -160dBm

Dynamic Performance

Altitude (max): 18000m Velocity (max): 515m/s Acceleration (max): 4G

Communication Interface

UART

UART Baudrate

4800 ~ 115200bps

Update Rate

1Hz (default), 10Hz (max)

Protocols

NMEA 0183, PMTK

Operating current

13mA

Operating Temperature (°C)

-40 to 85

Length (mm)

65

Width (mm)

30.5

Height (mm)

15

Weight (gm)

129

Quick Comparison

SettingsWaveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS removeWaveshare Power Management HAT for Raspberry Pi Supports charging And Power output at the same time, Embedded RTC and Multiple Protection Circuits removeWaveshare Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant removeWIZnet WizFi360-EVB-Pico removeWaveshare R800C GSM/GPRS HAT For Raspberry Pi removeWaveshare NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable remove
NameWaveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS removeWaveshare Power Management HAT for Raspberry Pi Supports charging And Power output at the same time, Embedded RTC and Multiple Protection Circuits removeWaveshare Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant removeWIZnet WizFi360-EVB-Pico removeWaveshare R800C GSM/GPRS HAT For Raspberry Pi removeWaveshare NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable remove
Image
SKU96848214864101486412149003614864131323453
Rating
Price2,347.002,219.001,549.00879.001,749.003,129.00
Stock
In Stock
In Stock
Out of stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockOut of stockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Description
  1. Power supply voltage: 5V / 3.3V
  2. Operating current: 13mA
  3. Protocols: NMEA 0183, PMTK
  4. GNSS antenna connector
  5. CAT24C32: EEPROM
  6. RT9193-33: power manager
  7. Battery holder: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
  1. Main Controller: Rp2040
  2. Communication Interface: Uart + Gpio
  3. Communication Baud Rate: 115200bps By Default (Configurable)
  4. Power Supply Interface: USB Port Or Ph2.0 Connector
  5. USB Power Input Voltage: 5v

 

  1. Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
  2. PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
  3. Fully isolated switched-mode power supply (SMPS)
  4. Smaller and more flexible with a more compact component layout

 

  1. Product: WIZnet WizFi360-EVB-Pico
  2. RP2040 microcontroller with 2MByte Flash
  3. Dual-core cortex M0+ at up to 133MHz
  4. 264kByte multi-bank high-performance SRAM
  5. External Quad-SPI Flash with eXecute In Place (XIP)

 

  1. Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
  2. UART interface, for connecting controller boards like Arduino/STM32
  3. Onboard voltage translator, 3.3V by default, switch to 5V via jumper
  4. 2x LED indicators, easy to monitor the working status
  5. SIM card slot, supports 1.8V/3V SIM card

 

 

 

 

  1. Model: Waveshare NB-IoT / Cat-M(eMTC) / GNSS
  2. Power supply voltage: 5V
  3. Logic level: 5V / 3.3V
  4. Overall current : 39mA
  5. Baudrate: 300-3686400 bps
Content

This is a Raspberry Pi GNSS HAT that supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.

It is an easy way to enable global positioning function for your Raspberry Pi.

What’s on Board:

Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS

  1. L76B module
  2. CP2102: USB TO UART converter
  3. CAT24C32: EEPROM
  4. RT9193-33: power manager
  5. Backup mode wakeup button
  6. Standby switch
  7. Indicators:
    1. RXD/TXD: UART RX/TX indicator
    2. PPS: GPS status indicator
    3. PWR: power indicator
  8. Raspberry Pi GPIO connector: for connecting with Raspberry Pi
  9. USB TO UART port
  10. GNSS antenna connector
  11. Battery holder: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
  12. UART selection jumpers
    1. A: control the L76B through USB TO UART
    2. B: control the L76B through Raspberry Pi
    3. C: access Raspberry Pi through USB TO UART
Applications:
  1. Vehicle tracking
  2. Asset tracking
  3. Security system
  4. Industrial PDA
  5. GIS application

Features:

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  2. Supports Multi-GNSS systems: GPS, BDS, and QZSS
  3. EASY, self-track prediction technology, help quick positioning
  4. AlwaysLocate, intelligent controller of periodic mode for power saving
  5. Supports DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
  6. UART communication baudrate: 4800~115200bps (9600bps by default)
  7. Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
  8. 4x LEDs for indicating the module working status
  9. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Package Includes:

1 x L76X GPS HAT

1 x GPS External Antenna (B)

1 x USB type A plug to micro plug cable

1 x RPi screws pack (2pcs)

1 x 2x20PIN female header

Power Management HAT For Raspberry Pi, Supports Charging And Power Output At The Same Time, Fast Load Transient Response, Embedded RTC, And Multiple Protection Circuits


Features:

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi, series boards
  2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  3. Onboard PCF8523 RTC chip, provides precise RTC information
  4. Onboard MP28167-A buck-boost DC chip for fast load transient response
  5. Onboard user-defined button, can be used for Raspberry Pi start-up, safe shutdown, or other customized function
  6. Protection circuits such as: power supply anti-reverse, counter-current proof, etc. ensure stable and safe operating
  7. Voltage/current monitoring circuit, monitors the Raspberry Pi operating voltage and current in real-time
  8. Comes with complete resources and manual

Specifications:

  1. Main Controller: Rp2040
  2. Communication Interface: Uart + Gpio
  3. Communication Baud Rate: 115200bps By Default (Configurable)
  4. Power Supply Interface: USB Port Or Ph2.0 Connector
  5. USB Power Input Voltage: 5v
  6. Ph2.0 Power Input Voltage: 3.3 ~ 4.2v (3.7v Lithium Battery)
  7. Embedded Circuits Battery Anti-reverse, Counter Current Proof, Voltage/Current Monitoring
  8. Dimensions: 56.5 X 65.0mm
  9. Mounting Hole Diameter: 3.0mm

Package Includes:

1 x Waveshare Power Management HAT for Raspberry Pi

 

The PoE HAT (E) is a mini 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some proper 802.3af-compliant power-sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.

This is a mini IEEE 802.3af-compliant PoE HAT for Raspberry Pi 3B+/4B. If you already have an IEEE 802.3af-compliant PoE router or switch, with this HAT you can provide both network connection and power supply for your Raspberry Pi in one cable.


Features:

  1. Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
  2. PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
  3. Fully isolated switched-mode power supply (SMPS)
  4. Smaller and more flexible with a more compact component layout

Specifications:

  1. POE Power Input: 37v ~ 57v Dc In
  2. Power Output: 5v 2.5a Dc Out
  3. Network Standard: IEEE 802.3 af POE
  4. Dimensions: 65.00 × 32.00mm
  5. Weight: 10g

Package Includes:

1 x Waveshare Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B

 

The WIZnet WizFi360-EVB-Pico is a development board designed for the WizFi360 module, a low-power, compact Wi-Fi module that provides Wi-Fi connectivity for IoT devices.

The development board includes a WizFi360 module, a USB port for power and communication, and various other connectors for interfacing with other devices. The board also consists of an onboard antenna and a U.FL connector for an external antenna, providing flexibility for antenna placement and optimization.

The WizFi360-EVB-Pico is designed to be used with the WIZnet WizFi360-EVB evaluation board, which provides a complete development environment for the WizFi360 module, including software development tools and example code.


Features & Specifications:

  1. RP2040 microcontroller with 2MByte Flash
    • Dual-core cortex M0+ at up to 133MHz
    • 264kByte multi-bank high-performance SRAM
    • External Quad-SPI Flash with eXecute In Place (XIP)
  2. Includes WizFi360-PA
    • WiFi 2.4G, 802.11 b/g/n
    • Support Station / SoftAP / SoftAP+Station operation modes
    • Support “Data pass-through” and “AT command data transfer” mode
    • Support serial AT command configuration
    • Support TCP Server / TCP Client / UDP operating mode
    • Support configuration of operating channel 0 ~ 13
    • Support auto 20MHz / 40MHz bandwidth
    • Support WPA_PSK / WPA2_PSK encryption
    • Support built-in unique MAC address and user-configurable
    • Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
    • CE, FCC certification
  3. Includes 16M-bit Flash Memory
  4. Micro-USB B port for power and data (and for reprogramming the Flash)
  5. 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
  6. 3-pin ARM Serial Wire Debug (SWD) port
  7. Built-in LDO

Package Includes:

1 x WIZnet WizFi360-EVB-Pico

The R800C GSM/GPRS HAT is a handy, low-power Raspberry Pi HAT which features multi-communication functionalities: GSM, GPRS, and phone calls, applicable to countries or regions with 2G network coverage, up to 85.6kbps GPRS speed. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, and so on.

Pin Structure:


Features:

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
  2. Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
  3. UART interface, for connecting controller boards like Arduino/STM32
  4. Onboard voltage translator, 3.3V by default, switch to 5V via jumper
  5. 2x LED indicators, easy to monitor the working status
  6. SIM card slot, supports 1.8V/3V SIM card
  7. Baudrate: 2400bps ~ 115200bps (115200bps by default)
  8. Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  9. Supports SIM application toolkit: GSM 11.14 Release 99
  10. Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Package Includes:

1 x Waveshare R800C GSM/GPRS HAT For Raspberry Pi

 

 

 

 

NB-IoT/Cat-M(EMTC)/GNSS HAT For Raspberry Pi, Based On SIM7080G, Globally Applicable. This is a telecommunication HAT which features multi communication functionalities: NB-IoT (Narrow Band-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System).

With the developing of telecommunication technology LTE, 2G/3G networks are fading away, the future world would be dominated by IoT technologies consisting of low bandwidth NB-IoT/Cat-M and high bandwidth 4G/5G standards. This HAT supports global bands of NB-IoT and Cat-M, as well as positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.


Features

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  2. Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
  3. Supports GNSS positioning (GPS, GLONASS, BeiDou, and Galileo)
  4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
  5. Breakout UART control pins, to connect with host boards like Arduino/STM32
  6. Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
  7. SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
  8. 3x LED indicators, easy to monitor the working status
  9. Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
  10. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Package include:

1 X SIM7080G Cat-M/NB-IoT HAT

1 X LTE antenna

1 X GPS External Antenna (B)

1 X USB type A plug to micro plug cable

1 X 2×20PIN female header

1 X RPi screws pack (2pcs)

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Band

GPS L1(1575.42Mhz), BD2 B1 (1561.098MHz)

Channels

33 tracking ch, 99 acquisition ch, 210 PRN ch

Horizontal Position Accuracy

<2.5mCEP

Time-To-First-Fix @-130dBm

Cold starts: <15s Warm starts: <5s Hot starts: <1s

Sensitivity

Acquisition: -148dBm Tracking: -163dBm Re-acquisition: -160dBm

Dynamic Performance

Altitude (max): 18000m Velocity (max): 515m/s Acceleration (max): 4G

Communication Interface

UART

UART Baudrate

4800 ~ 115200bps

Update Rate

1Hz (default), 10Hz (max)

Protocols

NMEA 0183, PMTK

Operating current

13mA

Operating Temperature (°C)

-40 to 85

Length (mm)

65

Width (mm)

30.5

Height (mm)

15

Weight (gm)

129

Power Supply

5V

Logic Level

5V / 3.3V (default)

Operating Temperature

-40°C ~ 85°C

Frequency Band

GSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+

Emitting Power

Class 4 (2W @ 900 MHz) Class 1 (1W @ 1800 MHz)

GPRS Connectivity

GPRS multi-slot class 12/10 (default) GPRS multi-slot class 1~12 (configurable)

GPRS data Feature

UL/DL speed: ≤85.6kbps Supports Packet Broadcast Control Channel (PBCCH) Coding schemes: CS-1, CS-2, CS-3, CS-4 Supports PAP (Password Authentication Protocol) for PPP connection Supports Unstructured Supplementary Service Data (USSD)

SMS Supports

MT, MO, CB, Text, PDU SMS storage: SIM card

Audio

Voice encode/decode mode: Half Rate, Full Rate, Enhanced Full Rate, Adaptive Multi-Rate Support echo cancellation Support noise reduction

Dimensions (mm)

30.2 x 65

Weight (gm)

26

Power supply voltage

5V

Logic level

5V / 3.3V (configured via jumper)

Overall current (idle mode)

39mA

Data format

NMEA-0183

Antenna

Active antenna

Baudrate

300~3686400 bps

Band

NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85

Emitting power

Class 5 (0.125W at LTE)

Supported SIM Card

NB-IoT / Cat-M card (1.8V SIM card ONLY)

Update frequency

1 Hz (default)

Operating temperature

-40°C ~ 85°C

Dimensions

30.2mm x 65mm