Raspberry Pi Hats
Waveshare Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections
Out of stock
Waveshare Isolated RS485 RS232 Expansion HAT for Raspberry Pi, SPI Control
Out of stock
Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS
Out of stock
| Band |
GPS L1(1575.42Mhz) ,BD2 B1 (1561.098MHz) |
|---|---|
| Channels |
33 tracking ch ,99 acquisition ch ,210 PRN ch |
| Horizontal Position Accuracy |
<2.5mCEP |
| Time-To-First-Fix @-130dBm |
Cold starts: <15s Warm starts: <5s Hot starts: <1s |
| Sensitivity |
Acquisition: -148dBm Tracking: -163dBm Re-acquisition: -160dBm |
| Dynamic Performance |
Altitude (max): 18000m Velocity (max): 515m/s Acceleration (max): 4G |
| Communication Interface |
UART |
| UART Baudrate |
4800 ~ 115200bps |
| Update Rate |
1Hz (default) ,10Hz (max) |
| Protocols |
NMEA 0183 ,PMTK |
| Recommended Power Supply |
5V / 3.3V |
| Operating current |
13mA |
| Operating Temperature (°C) |
-40 to 85 |
| Length (mm) |
65 |
| Width (mm) |
30.5 |
| Height (mm) |
15 |
| Weight (gm) |
129 |
Waveshare Mini Base Board (C) Designed for Raspberry Pi Compute Module 4
Out of stock
Waveshare Mini Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4
Out of stock
Waveshare Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Out of stock
| CM4 socket |
Suitable for all variants of Compute Module 4 |
|---|---|
| Connector |
Raspberry Pi 40PIN GPIO interface × 1 |
| USB |
USB 2.0 Type A interface × 1 |
| Camera |
MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector) |
| Storage |
Micro SD card socket for Compute Module 4 Lite (without eMMC) variants Power Input: 5V |
| Length (mm) |
5.5mm |
| Width (mm) |
4 |
| Height (mm) |
1 |
| Weight (gm) |
11 |
Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4
Out of stock
Waveshare Nano Base Board (C) for Raspberry Pi Compute Module 4, Same Size as the CM4, Onboard 8MP Camera
Out of stock
Waveshare NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable
Out of stock
| Power supply voltage |
5V |
|---|---|
| Logic level |
5V / 3.3V (configured via jumper) |
| Overall current (idle mode) |
39mA |
| Data format |
NMEA-0183 |
| Antenna |
Active antenna |
| Baudrate |
300~3686400 bps |
| Band |
NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 |
| Emitting power |
Class 5 (0.125W at LTE) |
| Supported SIM Card |
NB-IoT / Cat-M card (1.8V SIM card ONLY) |
| Update frequency |
1 Hz (default) |
| Operating temperature |
-40°C ~ 85°C |
| Dimensions |
30.2mm x 65mm |
Waveshare PN532 NFC HAT for Raspberry Pi, I2C / SPI / UART
Out of stock
| Model |
PN532 NFC |
|---|---|
| Product |
NFC HAT |
| Operating voltage |
3.3V/5V |
| Operating frequency |
13.56MHz |
| Communication interfaces |
I2C ,SPI ,UART (default) |
| Default baud-rate |
115200 bps |
| Product weight |
38g |
| Operating modes |
reader/writer mode supporting ISO/IEC 14443A / MIFARE scheme reader/writer mode supporting FeliCa scheme reader/writer mode supporting ISO/IEC 14443B scheme card operation mode supporting ISO 14443A / MIFARE scheme card operation mode supporting FeliCa scheme card operation mode supporting ISO/IEC18092 ,ECM340 point-to-point |
Waveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
Out of stock
| POWER INPUT |
7-36V |
|---|---|
| STORAGE |
MicroSD card socket for Compute Module 4 Lite (without eMMC) variants |
| FAN |
Allows speed adjustment and measurement ,5V / 12V |
| INDICATOR |
M.2 status LED CM4 status LED |
| CM4 SOCKET |
Suitable for all variants of Compute Module 4 |
| BATTERY SUPPORT |
Parallel 18650 Li-ion battery × 3 (NOT included) |
| NETWORKING |
Gigabit Ethernet RJ45 connector ,integrates 802.3af-compliant PoE circuit (5V/2.5A) |
| USB |
USB 2.0 Type A × 4 |
| CONNECTOR |
Raspberry Pi 40PIN GPIO header M.2 M KEY: slot ,for connecting NVME SSD ,or communication module with PCIE M.2 M KEY interface |
| DISPLAY MIPI DSI |
Port × 1 (22pin 0.5mm FPC connector) |
| CAMERA MIPI |
CSI-2 port × 2 (22pin 0.5mm FPC connector) |
| VIDEO HDMI |
× 2 ,supports 4K 30fps output |
| RTC |
Real-time clock with a battery socket and ability to wake Compute Module 4 |
| DIMENSIONS |
175.0 × 108.0mm |
Waveshare Power Management HAT for Raspberry Pi Supports charging And Power output at the same time, Embedded RTC and Multiple Protection Circuits
Out of stock