2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266

SKU: 1031024
In Stock

527.00

  1. Output port: USB or expansion port
  2. Output parameter 5V / 3A or 3.3V / 1A.
  3. Conversion efficiency up to 95%
  4. Input port: MICROUSB
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

This is a 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266. This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, Undervoltage protection, and the module is a portable mobile power supply that supports 3V/1A and 5V/3A two voltage outputs.

Installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative Or Installation errors will burn out the module. The battery voltage works normally from 3.2V to 4.2V. 5V voltage output rated current is 3A, maximum support 3.6A current (not recommended for overload, easy to damage the module, speed up the service life), the output of current depends on the quality of the 18650 battery.


Features:

  1. Supports 3V 1A voltage outputs.
  2. Supports 5V 3A voltage outputs.
  3. Micro USB charging current is 600mA-800mA.
  4. Supports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer.

Package Includes:

2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266

Additional information

Output Voltage(V)

3V/5V

Output Port Type

USB or expansion port

Input Port

MICROUSB

Conversion efficiency(%)

95

Length (mm)

100

Width (mm)

50

Height (mm)

20

Weight (gm)

38

Quick Comparison

Settings2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266 removeRefurbished – HTRC C240 DUO AC 100-240V DC 11-18 V LiPo LiFe / Li-ion/NiCd/NiMH/Pb Multi-Charger/Discharger removeXH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power remove4 x 18650 Lithium Battery Shield V8 V9 for Arduino ESP32 ESP8266 with On-Off Button removeSKYRC T100 5A 2X50W Dual Balance Charger removeSKYRC PC520 520W 20A Dual Channel 6S LiPo Charger remove
Name2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266 removeRefurbished – HTRC C240 DUO AC 100-240V DC 11-18 V LiPo LiFe / Li-ion/NiCd/NiMH/Pb Multi-Charger/Discharger removeXH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power remove4 x 18650 Lithium Battery Shield V8 V9 for Arduino ESP32 ESP8266 with On-Off Button removeSKYRC T100 5A 2X50W Dual Balance Charger removeSKYRC PC520 520W 20A Dual Channel 6S LiPo Charger remove
Image
SKU103102415101321121439115069413699441220016
Rating
Price527.00 5,299.00133.00919.004,199.0010,999.00
Stock
In Stock
In Stock
In Stock
Out of stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockOut of stockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Description
  1. Output port: USB or expansion port
  2. Output parameter 5V / 3A or 3.3V / 1A.
  3. Conversion efficiency up to 95%
  4. Input port: MICROUSB
  1. Adjustable digital DC Power.
  2. Built-in smart cooling fan for easy heat dissipation.
  3. Built-In PFC AC adapter high efficiency. with the power switch.
  4. Multiple charging modes.Lipo/Lilo/LiFe/LiHv: balance charge, charge, fast charge,storage, discharge.
  5. NiMH/NiCd: Charge, Discharge, Cycle.
  6. PB: Charge, Discharge.
  7. Multi-extra function:
  8. Battery Meter:Display lithium battery cell counts, total voltage, battery capacity percentage,each cell’s voltage. (does not support 1s battery)
  9. TVC(Terminal voltage control): The Charger allows the user to set the charge/discharge end voltage.
  10. Lithium Battery internal Resistance Check: can display each cell’s resistance.(does not support 1s battery)
  11. Balancer: individual-cell-voltage balancing, cell voltage Monitoring
  12. Smart battery: Smart battery I, II, III,(Need optional DJI Charging cable)
  13. Data storage and loading

 

  1. Power Supply Voltage:13.8-14.8V
  2. Relay Operating Voltage:12.4V
  3. Relay Disconnect Voltage:14.8V
  4. Voltage Tolerance:+/-0.1V
  5. Voltage Detection Way: DC voltmeter
  1. Buttons: 1. Voltage Switch, 2. ON-OFF
  2. Working Temperature: -20 °C~70 °C
  3. Output Port: USB or Expansion port
  4. Output Parameters: 5V/3A or 3V/1A
  5. Conversion Efficiency: up to 95% 
  1. Display Type: 2x16LCD
  2. Display Backlight: Blue
  3. Input Voltage: AC 100-240V
  4. Charge Wattage: 50Wx2
  5. SKYRC T100 is a twin-channel charger with two independent circuits
  6. Its sleek design allows easy front-loading plug-in convenience of balancing and XT60 ports
  7. It is not only compact in size but also powerful in output with maximum 100W charging power
  1. Supports 6s LiPo battery Adjustable charge current from 1.0 to 20.0A
  2. The charger can store the charge current of the last charge program
  3. LED digits on indicate charge/discharge status
  4. Two working modes: balance charge mode and storage mode
Content

This is a 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266. This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, Undervoltage protection, and the module is a portable mobile power supply that supports 3V/1A and 5V/3A two voltage outputs.

Installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative Or Installation errors will burn out the module. The battery voltage works normally from 3.2V to 4.2V. 5V voltage output rated current is 3A, maximum support 3.6A current (not recommended for overload, easy to damage the module, speed up the service life), the output of current depends on the quality of the 18650 battery.


Features:

  1. Supports 3V 1A voltage outputs.
  2. Supports 5V 3A voltage outputs.
  3. Micro USB charging current is 600mA-800mA.
  4. Supports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer.

Package Includes:

2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266

This is a Refurbished – HTRC C240 DUO AC 100-240V DC 11-18 V LiPo LiFe / Li-ion/NiCd/NiMH/Pb Multi-Charger/Discharger

Below is the link If you want a brand new https://robu.in/product/c240-duo-ac-100-240v-dc-11-18-v-lipo-life-li-ion-nicd-nimh-pb-multi-charger-discharger/

Condition: Product fully working condition with visible sign of box opened and used for testing purpose backed by robu warranty.

HTRC C240 DUO AC 150W /DC 240W Dual Channel 10A RC Balance Charger discharger for LiPo LiHV LiFe Lilon NiCd NiMh Pb battery

C240 is a new design dual balance charger by HTRC, which can charge two different kinds of batteries simultaneously.Multi-function,high power,Utilizing 2×16 LED display,built-in cooling fan,DC 11-18V or AC 100-240V dual power.Designed for charging LiPo LiFe Lilon LiHV NiCd NiMh Pb Smart Batteries.

It can support power distribution in AC mode, total power 150W (CH1+CH2=150Watt), and in DC mode, works in 2 * 120W. Max charge current can reach 10A each port in both AC and DC mode.

Features: 

  1. Full plastic shell, safe, compact, beautiful.
  2. Twin-channel, charge two different kinds of batteries simultaneously.
  3. High power, single port max 120W.support power distribution.
  4. Practical for a variety of batteries.LiPo LiFe Lilon NiCd NiMh Pb, and high power battery LiHV.
  5. Automatic identification of Li-Po batteries cells counts
  6. Adjustable digital DC Power.
  7. Built-in smart cooling fan for easy heat dissipation.
  8. Built-In PFC AC adapter high efficiency. with the power switch.
  9. Multiple charging modes.Lipo/Lilo/LiFe/LiHv: balance charge, charge, fast charge,storage, discharge.
  10. NiMH/NiCd: Charge, Discharge, Cycle.
  11. PB: Charge, Discharge.
  12. Multi-extra function:
  13. Battery Meter: Display lithium battery cell counts, total voltage, battery capacity percentage, each cell’s voltage. (does not support 1s battery)
  14. TVC(Terminal voltage control): The Charger allows the user to set the charge/discharge end voltage.
  15. Lithium Battery internal Resistance Check: can display each cell’s resistance.(does not support 1s battery)
  16. Balancer: individual-cell-voltage balancing, cell voltage Monitoring
  17. Smart battery: Smart battery I, II, III,(Need optional DJI Charging cable)
  18. Data storage and loading
  19. Re-peak and cycling of NiMH/NiCD battery.
  20. Maximum Safety: Automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit, temperature threshold.
  21. Firmware update.

robu

Package Includes:

1x C240 Charger-(Original)
2x Charge cable banana plug to T-Plug
2x Extension charge cable T-Plug to XT60
2x balance board with pin cord
1x AC Cord (US EU UK AU optional)
1x DC Cord
1x User’s Manual

 

 

This XH-M601 Battery Charging Control Board 12V Intelligent Charger Power Supply Control Module Panel Automatic Charging/Stop Power.

Potentiometer Adjustment:

RP1:adjust storage battery start charging voltage (low voltage setting: clockwise becomes higher, counter-clockwise becomes lower)

RP2:adjust storage battery disconnect charging voltage (low voltage setting: clockwise becomes higher, counter-clockwise becomes lower)


Features:

  1. It is very smart and helps to save electricity, and is safe.
  2. Automatically power off, save energy and extend battery life.
  3. Durable, Charging Protection, Easy to Install

Specifications:

  1. Power Supply Voltage:13.8-14.8V
  2. Relay Operating Voltage:12.4V
  3. Relay Disconnect Voltage:14.8V
  4. Voltage Tolerance:+/-0.1V
  5. Voltage Detection Way: DC voltmeter
  6. Charging Type:12V storage battery

Package Includes:

1 x XH-M601 12V Battery Charging Control Board Intelligent Charger Power Control Panel Automatic Charging Power

This is a 4x 18650 Lithium Battery Shield V8 V9 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266. This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, Under voltage protection, and the module is a portable mobile power supply that supports 3V/1A and 5V/3A two voltage outputs with an onboard voltage switching and ON-OFF button

Installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative Or Installation errors will burn out the module. The battery voltage works normally from 3.2V to 4.2V. 5V voltage output rated current is 3A, maximum support 3.6A current, the output of current depends on the quality of the 18650 battery.

Note: This product comes from different brands. We will ship it randomly according to availability.


Features:

  1. Supports 3V 1A voltage outputs.
  2. Supports 5V 3A voltage outputs.
  3. Micro USB charging current is 600mA-800mA.
  4. Supports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer.

Package Includes:

1 x 4 x 18650 Lithium Battery Shield V8 V9 for Arduino ESP32 ESP8266

SkyRC T100 is a twin-channel charger with two independent circuits which can charge batteries of varying chemistries (LiPo / LiFe / Lilon / LiHV / NiMH / NiCd / Pb) simultaneously. Its sleek design allows easy front-loading plug-in convenience of balancing and XT60 ports. It is not only compact in size but also powerful in output with maximum 100W charging power and 5A charging current which makes charging more sufficient. With the new AGM and cold charge modes, the user is free to charge their PB and AGM batteries in cold days.

 


Features:

  1. SKYRC T100 is a twin-channel charger with two independent circuits
  2. Its sleek design allows easy front-loading plug-in convenience of balancing and XT60 ports
  3. It is not only compact in size but also powerful in output with maximum 100W charging power
  4. Allows you to plug 2 batteries into one charger simultaneously
  5. Higher Accuracy with Three Decimals for Battery Voltage
  6. The charger firmware is highly optimized by displaying the battery voltage

Specifications:

  1. Display Type: 2x16LCD
  2. Display Backlight: Blue
  3. Input Voltage: AC 100-240V
  4. Charge Wattage: 50Wx2
  5. Battery Types/Cells:
    LiPo/LiFe/LiIon/LiHV: 2-4 cells
    NiMH/NiCd: 6-8 cells
    Pb:6/12V
  6. Battery Capacity Range:
    LiPo/LiIon/LiFe/LiHV: 100-50000mAh
    NiMH/NiCd: 100-50000mAh
    Pb: 100-50000mAh Battery Types/Cells:
    LiPo/LiFe/LiIon/LiHV: 2-4 cells
    NiMH/NiCd: 6-8 cells
    Pb:6/12V
  7. Battery Capacity Range:
    LiPo/LiIon/LiFe/LiHV: 100-50000mAh
    NiMH/NiCd: 100-50000mAh
    Pb: 100-50000mAh
  8. Charge Voltage:
  9.  LiPo: 4.18-4.25V/cell
    LiFe: 3.58-3.7V/cell
     LiIon: 4.08-4.2V/cell
    LiHV: 4.25-4.35V/cell
  10.   NiMH/NiCd: Delta peak detection: 3-15mV/cell ; Default: 4mV/cell
  11. Charge Current: 0.1A-5.0A
  12. Balance Cells: 2-4 cells
  13. Balance Current: 300mA/cell
  14. Safety Timer: 1-720minutes & OFF
  15. Charge Method:
       CC/CV for Lithium batteries.
    Delta-peak Sensitivity for NiMH/NiCd batteries.
    CC/CV and float charge for PB batteries.
  16.    Case Material: Plastic
  17. Case Size: 90x100x127mm
  18. Weight: 500g

Packages Includes:

1 x SKYRC T100 5A 2X50W Dual Balance Charger

SkyRC PC520 is an AC input LiPo charger for drones that can charge 6s LiPo batteries with balance charge mode and storage mode. It has short-circuit protection and reverse polarity protection for maximum safety. There is an LED digit on to indicate real-time data.


Features:

  1. Supports 6s LiPo battery Adjustable charge current from 1.0 to 20.0A
  2. The charger can store the charge current of the last charge program
  3. LED digits on indicate charge/discharge status
  4. Two working modes: balance charge mode and storage mode
  5. Maximum safety: short-circuit protection and reverse polarity protection

Specifications:

  1. Input Voltage:100-240V
  2. Output Power:520W
  3. Charger Current:1.0-20.0A
  4. LiPo Battery Cell Count:6S
  5. Working Mode: Balance Charge Mode/Storage Mode
  6. Size:220x142x65mm
  7. Weight:1.65kg

Package Includes:

1 x SKYRC PC520 LiPo Charger for Drones

1 x Connecting Cable

1 x User Manual

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Output Voltage(V)

3V/5V

Output Port Type

USB or expansion port

Input Port

MICROUSB

Conversion efficiency(%)

95

Length (mm)

100

Width (mm)

50

Height (mm)

20

Weight (gm)

38

Model No

HTRC C240 DUO

Input

AC 100-240V DC 11-18V

Charge power

:AC mode 150W (CH1+CH2=150Watt) DC mode 120W*2 =240W

Discharge power

Max 10W x 2

Charge current range

0.1-10A x 2

Discharge current range

0.1-2A*2

Lilon/LiPo/LiFe/LiHV cell count

1-6cells x 2

NiCd/NiMH battery cell count

1-15cells x 2

PB Battery voltage

2-20V x 2

Smart battery

I/II/III x 2

Current drain for balancing

500mA/cell

Net Weight(gm)

486 gm

Gross Weight

948 gm

Dimension

145 x 105 x 64 mm

Output Voltage(V)

3V/5V

Output Port Type

USB or Expansion

Input Port

MicroUSB

Conversion Efficiency(%)

95 %

Length (mm)

100

Width (mm)

96

Height (mm)

20

Weight (gm)

65