74LCX14MTCX – 3.6V Low Voltage Hex Inverter 5V Tolerant Schmitt Trigger Inputs TSSOP ON Semiconductor IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x 74LCX14MTCX – 3.6V Low Voltage Hex Inverter 5V Tolerant Schmitt Trigger Inputs TSSOP ON SemiconductorIC SMD-14 Package

The LM393 series are dual independent precision voltage comparators capable of single or split supply operation. These devices are designed to permit a common mode range−to−ground level with single supply operation. Input offset voltage specifications as low as 2.0 mV make this device an excellent selection for many applications in consumer, automotive, and industrial electronics.

Features:

1. Very Low Current Drain Independent of Supply Voltage: 0.4 mA
2. Input Common Mode Range to Ground Level
3. Differential Input Voltage Range Equal to Power Supply Voltage
4. Output Voltage Compatible with DTL, ECL, TTL, MOS, and CMOS
   Logic Levels
5. ESD Clamps on the Inputs Increase the Ruggedness of the Device
   without Affecting Performance
6. NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
7. These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
   Compliant

Specifications: 

1. Wide Single−Supply Range: 2.0 Vdc to 36 Vdc
2. Split−Supply Range: ±1.0 Vdc to ±18 Vdc
3. Low Input Bias Current: 25 nA
4. Low Input Offset Current: 5.0 nA
5. Low Input Offset Voltage: 5.0 mV (max) LM293/393
6. Wide Single−Supply Range: 2.0 Vdc to 36 Vdc
7. Split−Supply Range: ±1.0 Vdc to ±18 Vdc

Packages Includes:

1 x LM393 Low Power Low Offset Voltage Dual Comparator – SMD

LMV331W5-7 General purpose Low Voltage Comparator SOT-25 IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x LMV331W5-7 General purpose Low Voltage Comparator SOT-25IC SMD-5 Package

TL084 Quad JFET Input Operational Amplifier (Op-Amp) IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x TL084 Quad JFET Input Operational Amplifier (Op-Amp)IC DIP-14 Package

LT1638CMS8#PBF 1.2MHz 0.4V/us Micropower Rail-to-Rail I/O Op Amp IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x LT1638CMS8#PBF 1.2MHz 0.4V/us Micropower Rail-to-Rail I/O Op Amp MSOP SMD-8 Package

The INA126 is a precision instrumentation amplifier for accurate, low noise differential-signal acquisition. Their two-op-amp design provides excellent performance with low quiescent current (175 μA/channel). Combined with a wide operating voltage range of ±1.35 V to ±18 V, makes the INA126 is ideal for portable instrumentation and data acquisition systems.

Gain can be set from 5 V/V to 10000 V/V with a single external resistor. Laser-trimmed input circuitry provides low offset voltage (250-μV maximum), low offset voltage drift (3-μV/°C maximum), and excellent common-mode rejection.

Single version package options include 8-pin plastic PDIP, SOIC-8, and fine-pitch VSSOP-8 surface-mount. Dual version is available in 16-pin plastic PDIP, SOIC-8, and the space-saving, fine-pitch SSOP-16 surface-mount. All are specified for the –40°C to +85°C industrial temperature range.

Features:

1.  Low Quiescent Current: 175 μA/channel
2.  Wide Supply Range: ±1.35 V to ±18 V
3.   Low Offset Voltage: 250-μV Maximum
4.  Low Offset Drift: 3-μV/°C Maximum
5.  Low Noise: 35 nV/√Hz
6. Low Input Bias Current: 25-nA Maximum
7.  8-Pin PDIP, SOIC, VSSOP Surface-Mount Dual: 16-Pin PDIP, SOIC, SSOP

Specifications:

1. Number of channels (#): 1
2. Vs (Max) : 36
3. Vs (Min) : 2.7
4. Input offset: 250 V
5. CMRR (Min) : 83 dBm
6. Input offset drift :3 uV/C
7. Input bias current : 25 nA
8. Bandwidth at min gain : 0.2 MHz
9. Operating temperature range : -55 to 125 Degree Celcius

Package Includes:

1 x INA126 MicroPower Instrumentation Amplifier IC DIP-8 Package